353
Rule
(lemmy.blahaj.zone)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 12 Apr 2024
353 points (100.0% liked)
196
17057 readers
685 users here now
Be sure to follow the rule before you head out.
Rule: You must post before you leave.
Other rules
Behavior rules:
- No bigotry (transphobia, racism, etc…)
- No genocide denial
- No support for authoritarian behaviour (incl. Tankies)
- No namecalling
- Accounts from lemmygrad.ml, threads.net, or hexbear.net are held to higher standards
- Other things seen as cleary bad
Posting rules:
- No AI generated content (DALL-E etc…)
- No advertisements
- No gore / violence
- Mutual aid posts require verification from the mods first
NSFW: NSFW content is permitted but it must be tagged and have content warnings. Anything that doesn't adhere to this will be removed. Content warnings should be added like: [penis], [explicit description of sex]. Non-sexualized breasts of any gender are not considered inappropriate and therefore do not need to be blurred/tagged.
If you have any questions, feel free to contact us on our matrix channel or email.
Other 196's:
founded 2 years ago
MODERATORS
I don't know anything about the book in question, but I assumed it was because of the way the hook at the end of tape measures has a little play to it. If it's a poorly made tape measure that doesn't account for this properly, you get slightly different measurements by hooking around something versus pushing it against a surface.
(See point #5: https://www.ustape.com/hidden-features-of-measuring-tape/)
That wiggle is an 1/8". 12ths of an inch aren't really a thing.
Oh right, fractions of an inch are usually expressed in fractions of powers of two. SI humour went right over my head because I'm used to seeing weird fractions involved in those measurements.
Feet are divided by 12 but inches are divided by 8. And a yard is a foot times 3.
It makes way more sense when you use it, but trying to explain it does make it sound crazy.
I thought it was powers of two because it's not hard to find the halfway point between two other points, so you find the 1/2 mark, then the 1/4 mark, then 1/8, 16, 32, depending on how much precision you need. Then, at some point the unit changes again to mils or something like that.
After doing some digging in to this, I was thinking of the thou or mil, which is a thousandth of an inch. There's also another one that I hadn't heard of: the line, which is apparently equal to... 1/12 of an inch. Lol full circle.
If it's a poorly made tape measure to begin with, doesn't really matter. Could easily end up with 1/12" off.
If it's really bad it might even be 2/7ths!
Don't forget the 1/2" drywall, 3.5" studs, 1/2" foam thing, and siding.