40
Question about printing times (www.thingiverse.com)
submitted 6 months ago by skotimusj@lemmy.world to c/3dprinting@lemmy.world
19 comments fedilink hide all child comments

Hello all. I am very new to this but it is all very cool to me. I ran into a problem and I am not sure how to troubleshoot it. I downloaded a simple pull string helicopter off thingiverse. After running through the slicer software, the estimated build time is 131 hours. Relative to it’s size this seems insane. If I “run the simulated build”, there are long holds on one of the interior walls. I am hesitant to just “try it” and see if the pauses are a software thing that does not translate to the hardware. I am not sure how to break it down from here. Any advice?

Link to the plans included

you are viewing a single comment's thread
view the rest of the comments
[-] Creat@discuss.tchncs.de 11 points 6 months ago

Can you give us your basic info:

  • Which printer
  • Which slicer
  • What kind of profile
  • Which preset (if any)
  • What filament is selecte
  • did you change any settings

and just posta screenshot of the sliced model that the slicer should show you, makes it much easier to recognize trivial errors like wrong orientation.

[-] skotimusj@lemmy.world 5 points 6 months ago

Here is what I remember.

Creality ender 5 s1 Creality slicer High detail profile (Infill % 15, speed 100, nozzle temp 205, bed temp 60, z axis 0.1) PLA These were the default with no changes.

I am not sure what other parameters can be changed.

I will post a screenshot tonight. I did notice that 99% of the time is on the outer wall, this is where I noticed the pauses when I simulate the print.

[-] Creat@discuss.tchncs.de 2 points 6 months ago* (last edited 6 months ago)

I'm sure the official slicer will have a good profile, maybe the speed for outer walls accidentally got changed to 1 mm/s? I don't usually use Cura (that is what their slicer is based on), but I think to change speeds at all you need to hit "show advanced" or something? So if you didn't change anything, that is even less likely.

If it's real pauses (print head stops completely), I have even less ideas what that could be.

When I get back home I can try to see what I get with your settings, probably just resetting everything should also work for you though.

this post was submitted on 06 May 2024
40 points (95.5% liked)

3DPrinting

15591 readers
122 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee