29
submitted 4 months ago by mayra@lemmy.world to c/linux@lemmy.ml

Using a new laptop with a confirmed healthy battery, do you typically need to do battery calibration after a fresh distro install? Or is that only used when replacing a battery on an existing system?

By battery calibration I mean the multiple cycles of letting battery drain to 0% and then recharging back up to 100%.

Thanks in advance!

you are viewing a single comment's thread
view the rest of the comments
[-] federalreverse@feddit.de 10 points 4 months ago* (last edited 4 months ago)

Not an expert but: tldr don't.

Battery calibration is supposed to help the battery's firmware figure out how low the battery can go. It also tends to hurt your battery, so you should avoid performing these calibrations and keep the charge between 20% and 80% as much as you can.

It seems what you're trying to do is improve battery estimation by the OS on a new machine. And in that case, ~~Is just trey trip love~~* I'd just try to live with possible insecurity of not knowing whether the machine has 15 or 25 minutes left.

  • Thanks, auto-correct!
[-] mayra@lemmy.world 4 points 4 months ago

Appreciated! Thanks!

this post was submitted on 24 Jun 2024
29 points (91.4% liked)

Linux

47919 readers
1379 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS