Is the Sovol SV08 worth it as a Voron 2.4 alternative? (www.sovol3d.com)

submitted 5 months ago* (last edited 5 months ago) by wfh@lemm.ee to c/3dprinting@lemmy.world

14 comments fedilink hide all child comments

The SV08 is marketed as a mass-produced Voron 2.4, with a much lower price and a very quick setup. They even say they donate a small amount to the Voron project for each sale.

Has anyone here bought/tested it? What are your thoughts about it?

Are there some limitations/downsides compared to a Voron?

Is it possible to upgrade it Voron-style (Stealthburner, enclosure etc)?

you are viewing a single comment's thread
view the rest of the comments

[-] wfh@lemm.ee 3 points 4 months ago

Than you so much for such a detailed analysis!

For reference, I've had a (heavily modded) Creality Ender 3 V2 for a few years, and I've hit a limit in terms of speed and quality.

The filament path between the extruder and hotend is poorly-constrained, making it a pain to load The auto-z calibration is often just a smidge off It uses a custom nozzle/heater

If it's possible to install a Stealthburner instead of the standard extruder/hotend combo, it might solve most of these issues. Maybe some people are working on a V6 or Mk8 style hotend (I have a metric fuckton of Mk8 nozzles laying around)...

The fans are absurdly loud. All of them.

OK Noctua upgrades then. Compared to an already absurdly loud Ender 3, is it worse?

The mainboard is effectively a BTT CB1 and Fystec Cheetah on a single board Their software customizations are of dubious quality

Would a Voron-style mainboard + RPi + standard Klipper solve these issues or are there fundamental incompatibilities?

Thanks!

[-] r6e@lemmy.world 2 points 4 months ago* (last edited 4 months ago)

All of those upgrades are absolutely doable. Given the price of those upgrades, all-in, a Voron will be a better value. Unless you have most of the parts already, anyway.

Although, I wouldn't bother changing out the board unless you have specific needs. Firmware and config tweaks will take care of most issues I've seen with it.

The fan is probably on par with stock ender 3. But always-on.

this post was submitted on 22 Jun 2024

35 points (100.0% liked)

3DPrinting

15606 readers

167 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

henry_rowengartner@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemm.ee