15
Amcrest IP4M-1041B + Home Assistant
(www.amazon.com)
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
I use a bunch of Amcrest PoE cameras. None with PTZ though. I run them to a dedicated box running frigatenvr. From there I allow access from Homeassistant with the frigate integration.
IP cameras allow you to access the device via web gui where you can view and configure the camera for your needs. Once I’ve set them up I only ever access them again through frigate.
More or less the same setup, only I used the frigate HA integration to access the feeds. Was very nice up until the machine running frigate cooked the nvme.
I have the same setup +1
Thanks for the answer. What kind of management do they provide on their WebUI? Can the camera be 100% operated using the WebUI, standalone without anything else? I'm just trying to understand how dependent on external software (be it their apps, cloud or HA) the cameras are.
You can probably find a visual walkthrough of the GUI by searching youtube.
There's a login page. After you authenticate, there's a live view page, a review/recordings page if you are recording to SD card in camera, and a few settings pages.
I'd say you could absolutely access the camera standalone, but at least the cameras I have don't do any detection or notifications. That's where the NVR comes in. I know reolink has cameras that do all of the above including AI detection.
Following your advice I found a video for another model and it seems complete, even motion detection was available on the WebUI. I’m assuming you’re on the exact model I was looking at and it doesn’t have that feature am I right?
Yep. The models I have don’t have motion detection.