16
Fixing Double Inputs and flickering LEDs?
(imgur.com)
Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!
Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).
Banner by Jay Zhang on Unsplash
It's hard to tell if it's a similar cause, but I had issues with double-inputs and occasionally keys would work intermittently on my Dactyl Manuform.
After getting frustrated enough having resoldered it several times, I hot-glued the PCBs to the case. The thinking that small movements during a key press was causing the contacts to be broken. Everything has been working great ever since!
If you want to be cautious and have a multimeter, you could also check the connections between the keys. That might help isolate where to focus your efforts.
Will do, thanks so much! And good tip about the Glue! I have noticed on the left half (which is the side with the intermittent LED issue), that if I flex the assembly a smidge I can get the LEDs to come on, so it probably is a bad solder joint somewhere or something