29
submitted 4 months ago* (last edited 4 months ago) by Usernameblankface@lemmy.world to c/techsupport@lemmy.world

My laptop charges with USB C, so when the standard charger broke, I just used the USB out port from an EcoFlow battery. The display on the battery said the laptop pulled 25-30 watts while charging. So, why can't I use just any USB brick that can output more than 30 watts?

Is there something that is bound to go wrong that I don't know about?

Are laptop chargers really that special?

(Edited for clarity)

you are viewing a single comment's thread
view the rest of the comments
[-] Bianca_0089@lemmy.today 4 points 4 months ago* (last edited 4 months ago)

As long as it supports the USB-C PowerDelivery standard and has the supported voltages and wattage needed to do so. Most laptops will need 20v.

For chargers as small as those little phone-bricks the main problems would probably be the wiregauge of the USBC cable and the heat. Being so small and without exhaust vents I imagine the poor little charger would be at risk of early heat death. But it's doable

I've been able to normal-charge a 15 inch IdeaPad 82R9 using a little 1x1 inch 35watt GaN charger. But this was with the CPU locked to not go over 25% load(this laptop is FAST even with this sacrifice) and it makes that little charger get pretty hot. Without that CPU limit in place it actually drains faster than the charger can charge.

[-] Badeendje@lemmy.world 1 points 4 months ago

Modern GAN chargers can handle 65w in a pretty small charger though.

this post was submitted on 20 Jul 2024
29 points (100.0% liked)

techsupport

2470 readers
1 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Reddit

Software gore

Recommendations

founded 1 year ago
MODERATORS