926
Chaos!
(lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 13 Sep 2024
926 points (98.1% liked)
People Twitter
5034 readers
937 users here now
People tweeting stuff. We allow tweets from anyone.
RULES:
- Mark NSFW content.
- No doxxing people.
- Must be a tweet or similar
- No bullying or international politcs
- Be excellent to each other.
founded 1 year ago
MODERATORS
Depends on the person. I had an ex I spent about 4 hours in a parking lot trying to teach and she never got the take off down. I think some people are incapable of driving a standard.
Not that I'm condoning this, but, take the keys to the other car away, and give them a headstart and I bet they'd figure it out precisely one commute's time away from their next shift at work.
I think part of the difficulty is people 'learning' to drive stick in a parking lot. That's good for 30 minutes, but you won't actually get a feel for it unless you properly drive around.
Honestly though, I think if someone is actually incapable of driving a manual transmission car, then they probably shouldn't have a license in the first place, it shows such a lack of fine motor control that it brings in to question their ability to manage other aspects of driving.
I just can't feel that point where the clutch engages/disengages so I keep stalling at take off or grinding the gears when shifting. Haven't tried again in a decade.
You're supposed to push the clutch fully to the floor when shifting. You should never grind gears unless you're about to money shift or something.
That could be the problem. I was told to shift when I felt the clutch take the power off the engine, and then give it a little gas when I feel the gears remesh. It was also on a 30 year old Peterbilt 5/10 speed hi/lo truck with everything worn out, so probably not the best thing to learn on
Yeah no, you're better off learning on a car. And just know that what you will do at the beginning is different from what experienced drivers do, as they'll have developed a "feeling" for the car that you don't have yet, so just do it by the book.
Learning on a transmission with >6 speeds is hard mode, they do take a little more thinking with the gear pattern than in a car. Synchro versions are not that hard if you're used to a regular manual but adding another thing to learn is not ideal when starting out. If it was a non-synchro variant then good luck getting someone to pick that up without a few solid hours of learning time.
If you were being taught by someone used to heavy trucks it makes sense why they didn't tell you to push the pedal right in - on many (all?) non synchro transmissions pushing the clutch all the way in brakes the input shaft and if you're moving you then have to resynchronise it with the gear speed in order to get into gear.
Note you don't actually have to push the clutch in all the way in a car either, all that really matters is getting it past the point where the clutch is fully disengaged. After all the clutch plate is either touching the flywheel to some degree or it's not touching, once it stops making contact pushing it further away doesn't make a difference. When first starting out though it's easier to just push the pedal all the way in - save thinking about finer details until you're comfortable with the basics.