[-] Mr_Mofu@lemmy.blahaj.zone 27 points 2 weeks ago

Already canceled my Subscription the first time that aI Subtitle Crap came out. Sailin the seas it is!

12

I'm Sooooo Incredibly Happy with how it turned out! The Artist Loni really just got Lyra as a Character and managed to put it into the Art hmgnhngmhngmgmnh So Happy with it! Became my Profile Picture the Second it was done haha:

Check Out Loni! https://bsky.app/profile/loni.bsky.social/post/3lzetytgxnk2y

1
submitted 1 month ago* (last edited 1 month ago) by Mr_Mofu@lemmy.blahaj.zone to c/3dprinting@lemmy.world

So I got the 0.2mm Nozzle for my P1S to do some Detail Heavy stuff, while with PLA everything works perfectly Fine, Once I try to use any Roll of PETG HF it just refuses to Stick to the Plate!

I've been Mostly Testing on my Coolplate Supertack, but same issue happens on the Textured PEI. Both of them have no issues when trying PLA the Print before.

I've now tried a Range from 230c° to 250c° for the Nozzle and 60c° to 85c° for the Headbed with only limited result, as Only the Combination of 250c° and 85c° for the Heatbed got me the Brim around the Print to stick, but not the print itself.

What am I overlooking here? Is there some settings I need to adjust when switching Nozzles? Dp I need to go even Higher with the Temps? Maybe its the Flow Ratio? I've tried both the reset one and the one that was set with the 0.4 Nozzle with no real change. Cant run a new calibration for it since nothing sticks. Both spools of Filament have been dried for 48 Hours, with a few hours of resting before use ofcourse.

To note, PETG HF works perfectly fine on the 0.4 Nozzle and both Plates have been cleaned multiple times now... as seen to work with PLA. What settings work for you folks? Anyone with simular issues?

1
submitted 1 month ago* (last edited 1 month ago) by Mr_Mofu@lemmy.blahaj.zone to c/3dprinting@lemmy.world

So I've been wanting to make those Clear Keychains for some of my Artist Friends that we saw at a Convention, with my first idea being Resin 3D Printing, a thing that I am very much unfamiliar with!

My Idea is to 3D Print out a Transparent shape, then Print the same shape but mirrored, then take both and Sandwich a Paper Print picture of one of my Friends Characters between the 2 and bind it all together!

There is a concern that I have Before I go out and get myself setup with a Resin 3D Printer... how Clear is Clear Resin anyway? All I can seem to find Online is Prints made by the Resin Sellers, which lets be real, cannot be trusted on its own. Given that the Paper Picture Sandwiched in the 2 Resin Shapes needs to be very Visible, the Resin Shape must be basically Near Perfectly Clear. What is your Folks experience with Clear Resin? Would you recommend using a Resin 3D Printer for this or should I go look for other Methods?

Edit: Thanks too all of you for shimming in with your Many Detailed Experiences, Ideas and Suggestions! After considering everything, I've decided that the best Route I should take is utilising a Laser Cutting Machine with Acrylic. A thing I've somehow not considered before! I want to choose the Lasercutting method in Particular as I think it'll also allow for many other Possibilities to Create things in the Future! Now I do have to do my Research on what machines are on the Market for Transparent Acrylic, as from what I've read only certain Laser Types can Handle those. But I think I'll find something that Suits me! Much thanks for everyone who Commented here!

24

I'm so Incredibly Happy how she Turned out! I poured everything I like about Fox Girls into her Design and I think you all can tell haha!

Go check out the Artist who helped me in every step of Designing her, Kazumiskill

Bsky: https://bsky.app/profile/kazumiskill.bsky.social/post/3lw2q55vdgk2b Twitter: https://x.com/kazumiskill/status/1954588806340038948

17

I'm so Incredibly Happy how she Turned out! I poured everything I like about Fox Girls into her Design and I think you all can tell haha!

Go check out the Artist who helped me in every step of Designing her, Kazumiskill

Bsky: https://bsky.app/profile/kazumiskill.bsky.social/post/3lw2q55vdgk2b Twitter: https://x.com/kazumiskill/status/1954588806340038948

17

While they are far less Common then thier PLA Counterparts, PETG does also have Filaments that Glow in the Dark. Has anyone here tried them and maybe wanna share what they think of them and if they would recommend them?

317
14
135
Rainy Day (i.imgur.com)
240
17
[Deleted Post] (lemmy.blahaj.zone)
submitted 6 months ago* (last edited 6 months ago) by Mr_Mofu@lemmy.blahaj.zone to c/oldtimers_youngtimers@lemmy.blahaj.zone

Shoutout to lemmy for not letting me Delete a Fucking post again. I swear this has been an issue since I joined Lemmy 2 Years ago. This damn Platform never Improves.

124
[-] Mr_Mofu@lemmy.blahaj.zone 30 points 9 months ago

As someone who is largely around the art community admiring and sharing thier work, the fact that I could confuse AI Generated Images and thusly falsely share or save them has been such a huge anxiety of mine every since 2022

[-] Mr_Mofu@lemmy.blahaj.zone 63 points 1 year ago

I was gonna go ahead and argue about this, but sadly I have been depicted as a soyjak. My lawyers told me that there is literally nothing I can do about this now

[-] Mr_Mofu@lemmy.blahaj.zone 38 points 1 year ago

What? Do you not switch your tires like this? /s

[-] Mr_Mofu@lemmy.blahaj.zone 25 points 2 years ago

Nope, nothing. There doesn't honestly seem to be anything I'd use it for, even then I wouldn't wanna support it as long as it uses Data its gotten by basically stealing. Maybe once that has gotten better I'll look more into it, but at the current moment I just don't have the heart to support it

[-] Mr_Mofu@lemmy.blahaj.zone 42 points 2 years ago

Me when the room is a meter bigger then what is physically possible

[-] Mr_Mofu@lemmy.blahaj.zone 18 points 2 years ago

Feel that, especially the Gallery app editing heh

[-] Mr_Mofu@lemmy.blahaj.zone 19 points 2 years ago
[-] Mr_Mofu@lemmy.blahaj.zone 20 points 2 years ago* (last edited 2 years ago)

Non of that excuses the toxicity. We as a community have to collectively fight against this type of thing. Toxicity should have no place here, or anywhere for that matter. Ofcourse thats a pretty utopian mindset of its own im aware, but we have to atleast try. Because the second we allow it to be normalized, everything will go even further to shit

[-] Mr_Mofu@lemmy.blahaj.zone 37 points 2 years ago

The absolute Toxicity in this thread is just so depressing the see. Lemmy, I thought you where better then this... I thought this was supposed to be reddit without the petty toxicity in every comment section...

[-] Mr_Mofu@lemmy.blahaj.zone 36 points 2 years ago

Imagine snuggling on the big soft tail of your significant other while they pat you lovingly

view more: next ›

Mr_Mofu

joined 2 years ago
MODERATOR OF