Ordered back in Feb and just got delivered!

As soon as I saw the PS1 version release a while back, I was eager to get a PS2 version to backup the single 8MB card I've owned since my first PS2. I got all my games pre-owned back then, so sadly none came with extra memory cards 😭

Initially I ran into some issues copying the save files from my old 8MB to this one (using wLE), ended up turning off the "Game ID" MCP setting so all saves get copied to the same VMC instead of dedicated ones for each game.

Apparently this card works on the PS3 too if you hold the front right button while connecting the USB, looking forward to that since I have some PS1 saves trapped in there...

I've been looking into this material due to the really nice surface finish and clean look (actually purchased some already 😅)

However I recently came across a video by CNC kitchen where he raised some potential health concerns relating to the fibers specifically inside the filament. One of the commenters mentioned they couldn't wash the fibers off their skin, and another likened it to the "3d printing equivalent of asbestos"

I don't plan to print with it just yet due to needing a hardened nozzle, and spare extruder parts. However when I do, i'm feeling a little worried about how safe it is - mainly whether the final printed part is fine for occasional skin contact, or whether this material should ideally be left to just cosmetic parts.

P.S. image not mine, taken from here

Palworld launched on January 19 in early access form on Steam as well as on Xbox and Windows PC, day-and-date with Game Pass. Palworld overtook CD Projekt’s Cyberpunk 2077 to set Steam’s fifth highest peak concurrent player count with 1,291,967 online at the same time on Valve’s platform. Palworld is currently the most-played game on Steam, ahead of behemoths Counter-Strike 2, Dota 2, and PUBG. It is just the sixth game ever to hit one million concurrents on Steam.

IMO, Pocketpair has really smashed it with this one - hope the new revenue allows them to spend some time improving the game. Seen quite a few requests for voice actors being added to the NPCs as one example.

Thought I'd also add some FYIs here too:

• Palworld is on Game Pass for PC and Xbox, so you may already have access
• Multiplayer has been having a few issues with the load, may be worth considering joining or hosting a dedicated server if you plan to play with others. Singleplayer is unaffected by the server issues

I was recently tasked with rewriting the base CSS for an inventory/project management system, creating a set of reusable components designed to match, using an open/close approach. These were based on a pretty strict specification provided by one of our designers, who unfortunately left.

The implementation went well, but I've run into a bit of a problem. Quite often the team members make changes directly to the base class in the new base CSS file, rather than extending it, creating a new one, or using each system area's dedicated stylesheet file.

One of the more recent changes involved removing a grid-gap property from a rule from the base CSS, affecting a lot more than the single UI element the team member was working on.

Should I approach the team about this?

I haven't mentioned anything yet, but have noticed our QA team putting in more bugs about UI elements looking odd

Sorry in advance for the wall of text! Some background...

Enter me, someone who usually gets around by bicycle or public transport. I'm about 200 miles away from anyone close (besides my partner) and the trains, while fast and convenient, are expensive and quite limited at some times of the day.

So, as a solution, I decided I'll pick up some driving lessons so I can drive to friends with a rental or my own vehicle, on much more flexible terms. Since I had some existing experience in various driving simulators (almost 200h combined), I decided why not?

Now, about the lesson.

The instructor was absolutely amazing, got me up to speed with all kinds of things I wasn't familiar with, like adjusting the mirrors, wheel and stuff.

The car is a stick shift/manual, as that's the norm here. To be honest, changing gears was the easiest part - it felt really familiar because of the simulators. However I really struggled with how much information you need to take in from around you during the actual driving, literally had to try so hard to not make my mind wander for even a second, because I'd lose track of the environment and stuff. It was dark too so that made things a little challenging.

I'd say a major stress point too is the fact that i'm operating a 2000kg SUV, not an agile 20kg bicycle.

On one hand I'm hoping things improve with time, on the other I really wish we had good, affordable public transport to begin with.

What are your thoughts?

I'll admit I'm a little lost/down, it came out of nowhere! Over the years he's produced an endless stream of genuinely interesting videos. I can't really think of any other video hosts that can make a wide range of topics sound so interesting.

Probably I'm just scared of change...

On the flip side though, I'm really happy that he's decided his personal happiness is more important, and has decided to focus on people close to him.

What are your thoughts?

This is a pretty neat tour of Prusa's printer factory on the Strange Parts channel

They have an absolutely massive 600 printer farm, with the same mk3 and mk4 machines that they sell to customers, which is really impressive.

They do almost everything in-house, including manufacturing the printer mainboards, for faster project planning and turnaround times.

Note - the video is pretty long at about 40 mins!

After watching I'm a little tempted to pick up some prusament filament to support the company, really like how they are supporting local talent.

I've wanted one of these for a while, decided to bite the bullet a couple days ago! Seeing as I was somewhat familiar with CAD software (from engineering classes several years ago) it seemed fairly straightforward.

As someone completely new to this, there have been a TON of things I've learned from binging 3d printing channels...

• First layer adhesion 😭
• Bed levelling
• Types of extruders (bowden/direct) and how they affect what materials you can print
• Tons of printing materials, personally will be using PETG and PLA
• Keeping filament dry in a vacuum bag

And soo much more - but there is still a lot that I have absolutely no idea about.

The printer is a second-hand Flsun Q5, the seller sent it fully assembled (very, very brave of them, but it arrived unharmed). I had a brief look around at other options, but for the price of an easythreed, this was a no brainer.

I think the seller had some issues with bed adhesion, as there was a ton of slimy stuff on the print bed when it arrived. Used some isopropyl alcohol and a dish sponge to scrub it off, seems all fine now!

I had some issues with the Z-offset but got it good enough to where there is some first layer adhesion.

Model finished printing while I was drafting this post, I sprayed some contact cleaner onto the glass bed to take it off (is that bad?). There's some stringing:

I bought a 3d printer off Ebay which got delivered not too long ago, and it came with 2 sd cards - one with a build video and some demo print files, but worryingly another card that has all the previous owner's personal files on there.

Not sure whether to format it, or to contact the seller offering to send the card back (free of charge)... how would you prefer to be approached in a similar situation?

Edit: No gcode files are on the card, just 30gb of pictures, music and videos. Sent the seller a message offering to upload it to cloud or to send the card back