For any camera to see IR, there must be IR light there to be seen. LIDAR and proximity sensors emit their own light, but TIL tesla doesn't have any... Great tech...my 300€ vacuum bot has LIDAR... Ofc it doesn't go 130KM/h in the dark, but I was 99.99% sure any self-driving car had the bare minimum of sensors, but I guess Tesla isn't one of them.

I think the LIDAR and other sensors are supposed to be IR and see in the dark.

Usb is a carrying digital signals for the most part while headphonea are analog. So you have 2 options:

1. Implement some janky non-standard analog audio in some usb alternate mode that will only work with some devices
2. Add a digital to analog converter in the plug itself, which is more complex and expensive

Both options prevent you from chanrging while using headphones unless you use a splitter or wireless charging which is not ideal

3.5 mm may not be the king, but it's extremly simple and fairly robust and has little to no disatvantages except for wireless headphones sales ofc. You don't have to charge these heqdphones, you don't have to worry about losing one of them.

Wireless headphonwa have their uses, I doubt they benefit the majority of people tho.

I thought they started from the idea of creating an affordable device mostly for people that need and can't afford a proper computer... I guess money gave them amnesia

On tiktok too, where else.

Not all bots are bad, the piped bot is nice and there are others too

Nuclear powered ships are not a new thing. They've been around for decades. They would benefit our emission a lot. Let's hope that they will be allowed in the ports around the world, this has been the greatest limitation so far. Convincing general population that nuclear can be safe is no easy feat.

Keeping internet of shit devices on separate vlan is a good practice, but the apps on your phone still gather your data.

For the robot vacuum, when it brakes, you can look into valetudo supported models. It's a firmware hack that kills the cloud component and exposes it through a local http server, works very well. As for the dishwasher you could probably use a localy controlled smart socket with power monitoring to send a notification via home assistant when the power draw goes below certain threshold. Either zigbee/z-wave socket if you have other smart devices on these protocols, or a wifi tasmota device can work.

This may be a bit too far for some, but I believe we should keep our data safe, and if this is what it takes, then I am doing it.

Firefox nightly on android supported desktop extensions for quite some time. It wasn't that easy to install them, but once I did they worked fine. Maybe a bit more slugish than on pc, but that's expected given the resources limitations on mobile.

Europe is not one homogenous continent. Here in Europe where I am they are not common, and I've been to at least 2 other countries here in Euorpe where these mixers were not common.

I got a thermostatic shower mixer from ikea and it's awsome. Just set your preffered temp and it will make sure it stays that way. It wasn't even that expensive. I wish more people knew about it.

You can get thin clients for much less than that... Better performance if needed, similar power efficiency for similar loads, they sometimes bring storage, power supply and ram and you don't generate more e-waste as these are already being thrown out by many big companies every few years.

The only reason to go for the PI is if you really need the GPIO, the tiny form-factor and even then there are cheaper alternatives with similar or better spevs.