I've had this car for the last 10 years, and I'm up to about 86,000 miles. I recently had to have the catalytic converter replaced, because it was completely blocked. The dealership wanted to charge me $4,300, but an independent mechanic got me up and running for less than $1,200 with non-OEM parts. Before the catalytic converter blockage, I had tried to clean out the engine with CRC intake cleaner as I've seen done online. I'm concerned that that cleaning may have led to the catalytic converter blockage, or at least exacerbated it.

Before that, I had to have my crank position sensor replaced.

I know I have the 2.0L 4 cylinder engine, which is generally considered better than the 1.6 that is more liable to failure, but everything I keep reading online keeps me constantly concerned that this vehicle is going to fail in a catastrophic way sometime soon. After the recent repairs, it's running pretty well, and my gas mileage is going back up to levels that I expect from this car. However, I'm wondering if I shouldn't get out of this vehicle while it still has some value, and maybe buy something that's widely considered more reliable.

I'm especially concerned because of carbon buildup potentially accruing in this notorious GDI engine.

Thoughts?

It's got 250,000 miles and is $5,500. It's a former taxi service car, apparently. Obviously, a pre-purchase inspection would be a must. I've heard these cars are very reliable, but the mileage, accident history (3, not sure how serious), and potential status of the high voltage battery give me pause. I'm leaning against traveling to look at it, but I'm wondering if the model is just so good it's worth a try at that price point.

It would be replacing a 2015 Kia Soul with about 80,000 miles--Kia's engine woes have me spooked, so I'm considering trying to get something more likely to go for several hundred thousand miles. Any thoughts?

I'm looking to replace the HDD on an HP Pavilion dv 6 6130-us. It has an i-3 2330M CPU. I know it's old as dirt, but I'd like to use it to run old games. It's also the only thing I own with a CD drive.

I've upgraded the RAM to the maximum it will support (16 GB). I'm thinking an SSD will help it run a great deal faster, but I'm stuck on what to get. So far, the Crucial MX500 seems like a good choice, but I'm wondering if any semi-reliable cheap SSD will do for something this old. I have to stick with something with a 2.5 inch form factor that uses SATA. Thoughts?

So my eight-year-old wants a desktop PC. He's kind of a budding gamer, but right now, he almost exclusively plays Roblox on his iPad and will definitely carry this over to the PC. As he gets older, he may want to graduate to more demanding titles. On the other hand, he may also get bored with it and stick with consoles and mobile gaming.

I don't want to spend a ton on a PC for a very young child who may not take to PC gaming seriously, but I also want to get something that might be upgradeable as he grows if he wants to join the PC master race.

In my research, I came across this.

The recommendation I saw in PCMag that led me to the PC above suggested that the integrated graphics with the Ryzen 5 5600G could serve as a starting point for low level gaming and allow me to spend on a GPU card later if it's justified. The price and functionality appear to offer exactly the path I want.

I've seen other, more expensive versions of this pre-built, and I've also looked at the possibility of building it myself. I like this particular chip because it's only a generation or so back and it still appears to be well-regarded by the community. If I went with one of the cheap old workstation conversions, I'd be limited by proprietary hardware and fewer options--a lot of the stuff out there, especially Intel stuff, is very old and won't be able to run Windows 11 when it becomes necessary. What I'm finding suggests this path could see us through quite a few years to come and allow us to upgrade as needed.

Am I barking up the wrong tree here, or does this seem like it could work the way I want?

UPDATE: I've decided to buy the pre built deal I found with the 6500G. I would like to go to a fancier build, but the price of the AM5 chips and motherboards takes them off of the table for me right now. I think what I'm getting will be good enough as some of you have said.

Thanks to everyone for your help! If y'all are interested, I'll post an update when I get it.

I'm getting a lot of parts in languages I can't read. Can I filter for just my native language?