Designed this storage solution for belts
https://www.printables.com/model/519768-belt-organizer-hanger-6-or-8-belts
Nifty! But I only have 2 belts...
Clearly you need to buy more belts to fill out your new belt organizer
And don't forget to buy them in pairs so that the organizer remains balanced.
What happens when you wear one?
Good point.
Gotta wear them in pairs, for the balance, obviously.
Tetsuya Nomura approves.
My wife bought me a 6-slot watch box last year when I only owned two watches...
Obviously, I had to fill it up.
What if you have only one belt
What if you have an uneven number of belts because you take one or put one away? It would be very instable and would tilt without the same weight front and back.
That's my thoughts too.
This is just a suggestion, not a knock or anything against the poster. But a solution I think could work is to rotate the hook 90 degrees and have 2 of them, one at each end. Then it would remain flat and balanced no matter where the belts are on the rack.
Not a perfect solution, you wont see or have access to the belts at the back and the mount takes up more space on the rail. But at least you aren't playing a balancing game each time you take a belt.
I think I'd hang the hook off the end, so that the belts are stored in a vertical tree (slightly sloped, so that they don't fall over each other.) But that's an entirely new redesign for something that only really matters if you care about it.
There's a little bit of movement but it's not too annoying. When loaded up with belts, taking one off doesn't make a big difference.
Just leave the empty gap in the middle? Come on Sam, we've got to work together on stuff like this!
Buy a decoy belt that only gets used when you're wearing one of the real belts. The decoy belt can get a wall mounted hook so it's out of the way when no belts are being warn.
What's the solution for plaque buckles?
My personal solution was to not own any. But I have thought about it. Maybe a slot on both ends of the body to slide the knob of the buckle into. That would allow for two belts pretty easily.
Had to google this. Are these common? I personally think they’re not very good looking.
Common? Not sure. They're available at standard shops. I have had one for 20 years that I picked up in highschool from American Eagle for $34.50. Why is that etched in my brain? I was specifically looking for one at the time.
I prefer the look (as long as it's simple) and function.
I bought a tie hanger with hooks. It lets me hang up my four belts and ~10 ties (that I’ve never worn again since the rona). I’m usually in sweat pants and hardly use my belts anymore now that I think about it. Anyway, I really like it. Think this would have more Utility and use less material with just hooks.
Mine looks like this one
I have one that I absolutely despise. It has only one job and it tosses my belts to the floor...on purpose.
I would go with slopes instead of fillets, but nice anyway
Another reason for me to buy a 3d printer. Any tips on building one folks?
Buy an ender 3 if you're cheap and have plenty of tinker time. Buy something by Bambu if you have cash and want ease of use.
I'm more broke but want to get one anyway and I am between the technical and ease of use mode.
Try to go with something popular so you can find help when things inevitably go wrong. Expect to learn a lot when building. If you like that, awesome, do it. Otherwise you may want to consider a prebuilt prusa or bambu.
What's popular?
Ender, prusa, bambu are names that have popularity, longevity, and reputation.
You can find a ton of recommendations and best printer lists with a quick search. You would probably be fine with most printers on those lists if you wanted to save some money, but the above three are solid and give you a good budget range already.
How much money do you want to put into a setup? With $1000, you an get any of the really good printers, a different size nozzle, a few little tools, and plenty of filament.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible