As someone who exclusively used ortholinear split keyboards with no keys larger than 1.25, I have no use for stabilizers.
Why have anything larger than 1?
It’s most likely for the thumbs, which are not quite as agile as other fingers and hit keys at a different angle. Even then, the 1.25 is probably more “nice” than “necessary.”
I like keyboards without stabs.
The problem is that stabilizers tend to be a huge commitment unless maybe you have a hot swap board.
The ones I have are terrible-- loose fit in the caps-- but I'd have to desolder 7 switches and risk PCB damage to change them.
Yup. I just got a “modern vintage” industrial board that has similarly iffy stabs and even nonstandard stab spacing for the spacebar, and while I could probably dremel out the plate, I’d have to disassemble the board again and desolder the switch, then put it all back together, and THAT’S for a single plate-mount. So, nope, it keeps its original caps and stabs until something is just too perfect.
I don’t care for how this article assumes I know nothing about stabilizers; something I know a great deal about. And there was only one brand it mentioned that I haven’t heard of, but it was worth reading the article just for that, since they look promising.
Mechanical Keyboards
Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!
Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).
Banner by Jay Zhang on Unsplash