8
Can’t get LM Studio to work on OpenSUSE Leap 16 (feddit.nl)
submitted 12 hours ago* (last edited 12 hours ago) by DonAntonioMagino@feddit.nl to c/linux@lemmy.ml
10 comments fedilink hide all child comments

I recently bought a new computer, and, after again trying Windows 11 for a bit, I decided I wanted to keep using OpenSUSE.

Probably unpopular here: I enjoy screwing around with local LLM models. I used LM Studio on my old computer (on which I had also installed OpenSUSE Leap). I also tested it on my new computer in Windows 11, and it worked very nicely. Now I’m trying on my new computer with OpenSUSE Leap 16, and it doesn’t work at all.

Specifically: no runtimes nor engines are present, and my hardware isn’t recognised at all - not my GPU nor my CPU, nothing.

I’m thinking it’s a driver issue. I’ve looked around quite a bit, and also looked up (what seems to me) the most important error messages I got when running the AppImage from the console:

spoiler[BackendManager] Surveying hardware with backends with options: {"type":"newAndSelected"} [BackendManager] Surveying new engine 'llama.cpp-linux-x86_64-avx2@2.12.0' [ProcessForkingProvider][NodeProcessForker] Spawned process 13407 [ProcessForkingProvider][NodeProcessForker] Exited process 13407 21:17:29.644 › Failed to survey hardware with engine 'llama.cpp-linux-x86_64-avx2@2.12.0': LMSCore load lib failed - child process with PID 13407 exited with code 127 [BackendManager] Survey for engine 'llama.cpp-linux-x86_64-avx2@2.12.0' took 9.47ms [BackendManager] Surveying new engine 'llama.cpp-linux-x86_64-nvidia-cuda-avx2@2.12.0' [ProcessForkingProvider][NodeProcessForker] Spawned process 13408 [ProcessForkingProvider][NodeProcessForker] Exited process 13408 21:17:29.648 › Failed to survey hardware with engine 'llama.cpp-linux-x86_64-nvidia-cuda-avx2@2.12.0': LMSCore load lib failed - child process with PID 13408 exited with code 127 [BackendManager] Survey for engine 'llama.cpp-linux-x86_64-nvidia-cuda-avx2@2.12.0' took 3.70ms [BackendManager] Surveying new engine 'llama.cpp-linux-x86_64-vulkan-avx2@2.12.0' [ProcessForkingProvider][NodeProcessForker] Spawned process 13409 [ProcessForkingProvider][NodeProcessForker] Exited process 13409 21:17:29.651 › Failed to survey hardware with engine 'llama.cpp-linux-x86_64-vulkan-avx2@2.12.0': LMSCore load lib failed - child process with PID 13409 exited with code 127 [BackendManager] Survey for engine 'llama.cpp-linux-x86_64-vulkan-avx2@2.12.0' took 3.57ms

This is my system with installed drivers:

I did get Ollama to work... Any thoughts?

top 10 comments
sorted by: hot top controversial new old
[-] moonpiedumplings@programming.dev 2 points 4 hours ago

I know this issue, I had a similer issue trying to get the client for krunker.io working with my nvidia gpu. I might have the solution saved somewhere, this comment is so I can remind myself to check.

[-] just_another_person@lemmy.world 3 points 11 hours ago

This looks like a sandboxing issue. Using the "no-sandbox" flag has never worked on AppImage from what I remember, except for very light runtimes. Running with sudo will throw that error because the root user has no display manager running.

Just try running the installer if you don't want to mess around with debugging the AppImage. Check the GitHub Issues for related keywords and see if others are running into the same issue, maybe it's just a specific release, or SELinux causing the problem.

[-] DonAntonioMagino@feddit.nl 1 points 10 hours ago* (last edited 9 hours ago)

You mean the Debian installer? Seems like a bad idea on OpenSUSE.

EDIT: looking in the bug reports on Github, I’ve found a very recent bug report identical to what I’ve described, so it doesn’t seem to be isolated at least.

[-] just_another_person@lemmy.world 4 points 8 hours ago* (last edited 8 hours ago)

They have a simple bash installer from what I see. You can also install everything via pip as well. Couple quick commands.

That bug report mentions a few versions, so maybe just go back to whatever version was working on your other machine.

[-] DonAntonioMagino@feddit.nl 1 points 20 minutes ago

I couldn’t get it to install... Something about ldconfig not being in the path.

I’ll try pip later, then...

[-] m33@lemmy.zip 3 points 12 hours ago

I use lmstudio too, from the official appimage.

Never managed to get the nvidia working, probably because the nvidia drivers are a pain to install properly (secure boot, drivers, kernel, display … everything must be perfect or it doesn’t work).

But the CPU is just enough for local models if you are a bit patient and have plenty RAM.

It is very unusual for lmstudio failing to detect your CPU and your system memory. I would start looking for excessive restriction affecting lmstudio itself (appimage ? Native ? Something with selinux or system hardening ?)

[-] DonAntonioMagino@feddit.nl 1 points 12 hours ago

Thanks for the tips. How do I go about doing this? What I’ve tried is run LM Studio from the console with --no-sandbox. No idea if that has something to do with what you’re referring to.

I’ve also tried running it with sudo, which gives this error message:

spoiler[15557:0409/215138.000614:ERROR:ui/ozone/platform/x11/ozone_platform_x11.cc:249] Missing X server or $DISPLAY [15557:0409/215138.000647:ERROR:ui/aura/env.cc:257] The platform failed to initialize. Exiting. Segmentatiefout

[-] m33@lemmy.zip 1 points 2 hours ago

That may be related to your desktops environment with Wayland instead of good old X11

[-] Shadowcrawler@discuss.tchncs.de 2 points 11 hours ago

Is LM Studio better than Jan? Just asking as a user wo never had a Problem with Jan on Arch Linux.

[-] DonAntonioMagino@feddit.nl 1 points 10 hours ago

It detects my hardware at least, but for whatever reason the Hub is empty and I can’t download the default Jan model... But it works when I import the models manually.

this post was submitted on 09 Apr 2026
8 points (100.0% liked)

Linux

63789 readers
388 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 6 years ago
MODERATORS
AgreeableLandscape@lemmy.ml
nooter692@lemmy.ml
MarcellusDrum@lemmy.ml
cypherpunks@lemmy.ml
cyclohexane@lemmy.ml
d3Xt3r@lemmy.nz