Use gluetun, look up how to configure for your provider. Run a 2nd container for your torrent client, using network_mode: “service:gluetun”
to run all your traffic though the vpn. Note that if you’re forwarding ports from your client to e.g. access the web UI, you’ll need to forward them from the gluetun container instead.
This is definitely the way to do it long term. I’ve used a hybrid download + VPN client but in the end I moved to a split gluetun + client since it offers the best flexibility.
If you want to use transmission as your torrent client I recommend checking out https://github.com/haugene/docker-transmission-openvpn . There are some additional configuration changes needed for mullvad but it should be straightforward.
This is what I use and love it. Took a bit to get it configured properly with airvpn, but now it's rock solid.
Just google "gluetun + qbittorrent". There are some examples, but in short you want network_mode: "service:gluetun"
and depends_on: -gluetun
under qbittorrent so it doesnt have connection if gluetun fails.
Gluetun supports a lot of providers, documentation is decent and simple.
But consider airvpn or any other with port forwarding if you want to torrent. Mullvad ditched PF recently 😔
Thanks for recommendation, didn't know Mullvad discontinued port forwarding. That was a reason I chose them a year ago.
Now will tale a look at ProtonVPN and AirVPN as alternatives.
Your answer is amazing, you covered it all and so concise, that should be on FAQ :)
Meaning no torrent downloads are possible? Or "just" no uploads?
Meaning both are possible, but its much better with port forwarding. You cant connect to everyone, but for well seeded torrents it shouldnt be an issue.
No one-stop-shop that I have seen or heard of, but check out Gluetun. https://github.com/qdm12/gluetun
My (almost finished) script creates a setup like this. It doesn't just do a client + VPN, but it can also set up radarr, sonarr, jellyfin, and a couple of other services
Trash guides say you shouldn’t run the *arr’s through a VPN because you’re likely to get blocked by metadata servers. I only run my download client through the VPN + also use gluetun’s HTTP proxy for Prowlarr’s indexers
I wish I could do that as well, but most of the big public trackers are blocked where I live. I need to run Sonarr and the like through the VPN because I can't search through the trackers otherwise
I haven't heard of prowlarr's HTTP proxy. Do you have a link to more info about it?
Sure, the docs are pretty minimal though: https://wiki.servarr.com/prowlarr/settings (just click on Proxy)
Basically you can configure a proxy (from your VPN provider for example) for each indexer (or font add a tag to apply it to all of them), and queries to indexers will run through there. This avoids Sonarr making calls to TVDB or whatever through the VPN and getting blocked.
This is a great work! Documentation is clear to a person not familiar with the topic (me). Will try that out and provide feedback, thank you!
I'm currently in the process of a complete rewrite. Once the v2 tag is out I can actually go into deeper feedback :)
I use portainer for stacks so idk how you do it manually... But a stack with Gluetun and any apps that you use the VPN. I have Firefox(kasm) in my stack with the homepage set to ipleak to double check the VPN
I figured you wanted a 4th person telling you to use Gluetun. The biggest advantage is that it can run anything through the VPN. Not just the torrent client, but also radarr, sonarr, slskd, etc
I recently went through setting this up. I can give you a base compose.yaml based on the one I have
For the wireguard config, you would throw your .conf file to /path/to/wireguard/config, like so: /path/to/wireguard/config/wg0.conf
This setup assumes you have ipv6 working and enabled. The wg0.conf would also have the VPNs ipv6 address. I use Mullvad too btw.
You can access Qbittorrent's web UI through http://localhost:8090.
I'd like to note that the image I use for Qbittorrent has support built in for VPN, but with the setup I have I basically have the wireguard container with its network, and multiple containers on that same network. In theory it should work with other bittorrent clients.
And the docker images for reference:
version: '3.7'
services:
wireguard:
image: lscr.io/linuxserver/wireguard:latest
container_name: wireguard
cap_add:
- NET_ADMIN
- SYS_MODULE #optional
networks:
- wireguard_network
environment:
- PUID=1000
- PGID=1000
- TZ=Etc/UTC
volumes:
- /path/to/wireguard/config:/config
- /lib/modules:/lib/modules #optional
ports:
- 51820:51820/udp # Wireguard
- 8090:8090 # QBittorrent
sysctls:
- net.ipv4.conf.all.src_valid_mark=1
- net.ipv6.conf.all.disable_ipv6=0
restart: unless-stopped
qbittorrentvpn:
privileged: true
container_name: qbtwg
network_mode: service:wireguard
depends_on:
- wireguard
volumes:
- '/path/to/qbtconfig/:/config'
- '/path/to/downloads/:/downloads'
environment:
- VPN_ENABLED=no
- VPN_TYPE=wireguard
- PUID=1000
- PGID=1000
- LAN_NETWORK=192.168.1.0/24
- 'NAME_SERVERS=1.1.1.1,1.0.0.1'
restart: unless-stopped
image: dyonr/qbittorrentvpn
networks:
wireguard_network:
driver: bridge
Don‘t run privileged images! Drop all CAPS, enable no-new-privileged, use non-privileged users only.
Hey there, thanks for the tips. It seems I can't get the wireguard container working without the NET_ADMIN CAP. I looked at the gluetun image and it has it too. Is it possible to run a docker wireguard client without that CAP?
Wireguard needs kernel access so needs to run privileged.
I don't do it all in one compose file out of preference, but as others have said Gluetun + your preferred torrent client with all networking going to Gluetun. I've been running this way with deluge for a while now and it's been solid as a rock.
Piracy: ꜱᴀɪʟ ᴛʜᴇ ʜɪɢʜ ꜱᴇᴀꜱ
⚓ Dedicated to the discussion of digital piracy, including ethical problems and legal advancements.
Rules • Full Version
1. Posts must be related to the discussion of digital piracy
2. Don't request invites, trade, sell, or self-promote
3. Don't request or link to specific pirated titles, including DMs
4. Don't submit low-quality posts, be entitled, or harass others
Loot, Pillage, & Plunder
📜 c/Piracy Wiki (Community Edition):
💰 Please help cover server costs.
Ko-fi | Liberapay |