30
[Bazzite] Fedora Kinoite Duplex Printing Issue (support.brother.com)
submitted 4 months ago* (last edited 4 months ago) by Eric_Pollock@lemmy.dbzer0.com to c/linux@lemmy.ml
7 comments fedilink hide all child comments

Hello! I use Bazzite Linux with KDE, and I'm having some issues with duplex printing on my system.

I have a Brother HL-L2300D, and I've already installed the drivers for it. Brother provides an install script for their driver on their website, but because my system is rpm-ostree based and immutable, I would get rpm-ostree errors and the installation would fail.

I found a Reddit post yesterday that suggested running sudo rpm-ostree install printer-driver-brlaser, which worked and I was able to connect to the printer and configure everything as needed.

However, when I try to print on both sides of the page, the back side of the page prints upside-down. I've tried changing the setting for which edge to flip when printing (portrait/landscape), and it doesn't seem to change anything. I printed the same document on a Windows machine on this printer, and it went through just fine, so I've isolated the problem down to the CUPS server that my machine is running.

If there's any more information I can provide, please let me know. I've tried the troubleshooting steps I know and have reached the limit of my knowledge.

top 7 comments
sorted by: hot top controversial new old
[-] thayer@lemmy.ca 4 points 4 months ago* (last edited 4 months ago)

I recently posted about setting up my new Brother HL-L5210DW printer under Fedora Atomic, which was also having issues with duplex printing when using the brlaser driver. Maybe this will help you too:

https://lemmy.ca/post/23695569

If yours is networked, I think you just need to select the IPP option mentioned in my post, and enter the path as ipp://<printer-ip-address>

[-] user@lemmy.one 2 points 4 months ago

Curious, how did u dnf install if it's immutable? Through distrobox and then export ?

[-] Eric_Pollock@lemmy.dbzer0.com 2 points 4 months ago

Sorry! I made a mistake in my post. I used rpm-ostree, not dnf

[-] user@lemmy.one 1 points 4 months ago

👍

[-] Eeyore_Syndrome@sh.itjust.works 2 points 4 months ago

Have you tried using the driverless cups driver tho?

[-] Eric_Pollock@lemmy.dbzer0.com 1 points 4 months ago* (last edited 4 months ago)

How would I do that? When trying to add my printer, it wouldn't let me continue unless I selected a printer model

Edit: I found the generic printer option under the model selection. However, when I select it, the paper goes through the printer but nothing is printed

[-] Eeyore_Syndrome@sh.itjust.works 2 points 4 months ago

I have a Brother HL-L2395DW

Tho when I went to add it as a printer, my system automatically selected the "reccomended" drivers on Plasma 6+.

I remember on older Plasma, that you still had to select Brother first, then search for model type. At that next screen or if I edit my current printer, I searched for L23:

By generic printer driver, I meant the cups/driverless one on this selection screen. Opposed to any official Brother or GutenPrint drivers/ppd files.

I did try searching for your exact model, but nothing showed for me...tho I can't tell if that's because mine is already wireless/UPnP and grabbing only it's settings.

I'm using the Brother HL-L2395DW series, driverless, 2.0.0

I Just have to also make sure duplex printing is set to on, both system and firefox/application whatever settings. On Firefox I use Flip on long edge.

this post was submitted on 05 Jul 2024
30 points (100.0% liked)

Linux

48152 readers
772 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
AgreeableLandscape@lemmy.ml
nooter692@lemmy.ml
MarcellusDrum@lemmy.ml
cypherpunks@lemmy.ml
cyclohexane@lemmy.ml
d3Xt3r@lemmy.nz