105
How to Maintain Wooden Cooking Tools for Generations to Come (www.eater.com)
submitted 3 months ago by Nyssa@slrpnk.net to c/buyitforlife@slrpnk.net
26 comments fedilink hide all child comments

Off to purchase some coconut oil!

top 26 comments
sorted by: hot top controversial new old
[-] DScratch@sh.itjust.works 75 points 3 months ago

I would 100% avoid coconut oil or any organic oil for wood. It can go rancid and ruin your tools.

You can buy food grade mineral oil from your local pharmacy. Just rub some on with a cloth, and keep applying as long as the wood will soak it.

Reapply when the wood lightens.

Source: I make cutting boards and such as a hobby.

[-] RvTV95XBeo@sh.itjust.works 1 points 10 hours ago

The risk of going rancid is pretty low in refined, or even better, MCT coconut oil. Most pro woodworkers I know use it (or products containing it, like ”Walrus Oil").

[-] teejay@lemmy.world 9 points 3 months ago

Same. This stuff is excellent and I've used it for years on cutting boards and butcher blocks I've made. It's all natural, obviously food safe, super easy to apply with a paper towel or cloth, and the bottle lasts forever.

[-] stabby_cicada@slrpnk.net 13 points 3 months ago

Mineral oil is a petroleum distillate, a byproduct of fossil fuel production. I'm not saying it's necessarily unsafe or unethical to use, but calling it "all natural" is a bit of a reach.

[-] teejay@lemmy.world 4 points 3 months ago

I see. Thanks, I didn't realize that.

[-] DScratch@sh.itjust.works 5 points 3 months ago

You can (if you like) buy food grade beeswax and use a double boiler to melt the wax and oil together.

For fun more than anything else.

[-] sunzu@kbin.run 2 points 3 months ago

The credited response!

[-] tal@lemmy.today 24 points 3 months ago* (last edited 3 months ago)

A little extra TLC can turn your wooden cutting board into a family heirloom

The reason I have a cutting board in the first place is because it is expendable and, unlike, say, a table or countertop, it doesn't matter if a knife cuts into it and damages it. Like, it's literally the expendable surface between the knife and the thing I don't want to suffer wear and tear.

[-] Nyssa@slrpnk.net 20 points 3 months ago

For sure. I think trying to preserve these tools is a bit of a waste of time. But extending their lifespan is always a win in my book

[-] sunzu@kbin.run 6 points 3 months ago

not oiling your woods and stainless kitchenware is abuse!

with that being said i would use food grade mineral oil, why are you suing coconut?

[-] Alexstarfire@lemmy.world 7 points 3 months ago

I think I'm out of the loop. Why would you oil stainless? It's not cast iron.

[-] TheBenCommandments@infosec.pub 8 points 3 months ago

I’m curious about the bacterial growth factor that can occur with wood. Saying these things can last a lifetime without even mentioning the bacteria they can absorb and harbor makes this read more like an ad at some points.

[-] RootBeerGuy@discuss.tchncs.de 23 points 3 months ago

I don't have a better source, so feel free to be critical to this but wood actually is antibacterial as it dries according to for example this https://www.hawkmade.com/the-science-behind-the-antibacterial-properties-of-wood

[-] Kalkaline@leminal.space 20 points 3 months ago

You probably don't want to use plastics if you're concerned about bacteria.

[-] TheBenCommandments@infosec.pub 5 points 3 months ago

Right I’m of the mind that silicone and metal are for me since those tools can be chucked into the dishwasher.

[-] delirious_owl@discuss.online 14 points 3 months ago

RIP your knifes

[-] zero_spelled_with_an_ecks@programming.dev 4 points 3 months ago

Yes. And they get sharpened until they die. They go in the dishwasher because my tools serve me, not the other way around, and they are adequate for what I do.

[-] zeekaran@sopuli.xyz 3 points 3 months ago

What is happening to the knives in this context?

[-] PM_Your_Nudes_Please@lemmy.world 2 points 1 month ago

Knives go dull much faster in the dishwasher. If you want to keep your knives sharp, you should be hand washing as soon as you’re done with them.

Also, get a damned knife block; Having your knives rattling around in a drawer is just asking for dull knives and accidents.

[-] RvTV95XBeo@sh.itjust.works 1 points 10 hours ago

Knives go dull much faster in the dishwasher

Much faster feels like a bit of a stretch to me. I've got a set of "good knives" that I hand wash, and a Victorinox chef's knife that I generally abuse and toss into the dishwasher.

The Vnox does dull sooner than the "good knives", but not dramatically so, and it probably gets ~50% more usage between sharpening (I sharpen them all together), largely because you can just toss it straight into the dishwasher.

Knives dulling in your dishwasher may be a sign that they are not so stainless and are rusting at some level. I find either really cheap or really expensive knives tend to be of a less stainless grade of steel. If you're anywhere in the middle of the quality spectrum you're probably fine using a dishwasher (unless you're also seeing stainless steel flatware corrode, in which case stop washing your dishes with acid).

[-] reddig33@lemmy.world 0 points 3 months ago

Plastics can be put in the dishwasher. But then you also have to deal with microplastics.

[-] Kalkaline@leminal.space 4 points 3 months ago

I'm talking more about the micro abrasions plastics get.

[-] southsamurai@sh.itjust.works 13 points 3 months ago

They don't really harbor bacteria well. Most of the woods uses are anti-bacterial, they actually kill off a whole host of pathogens.

But, if you're taking care of the cutting board, you can sanitize easily anyway. A mild vinegar or bleach solution, an inexpensive cloth towel, and you just wipe down between things. If you're really paranoid, you can wash a smaller board in a sink, but it isn't really necessary.

If you keep the board oiled and waxed, nothing is going to soak in at all.

Now, I'm not saying you can just chop up a bunch of dripping chicken and leave it sitting there for hours. But you can safely wipe down after meats, and have no fear of contamination, or cross-contamination. It just isn't a good place for bacteria to thrive at all, and good cleaning takes care of the rest. Hell, I'd trust that over a plastic board that's run through a dishwasher, which is pretty much as clean as things get.

No bullshit, there's been testing done on wood cutting boards. They don't absorb much of anything, and don't harbor bacteria. Even if you leave something wet on them, it won't soak in much at all, and will dry completely given time. That's not the kind of environment pathogens like.

[-] altima_neo@lemmy.zip 6 points 3 months ago

Wood tends to be antibacterial.

[-] sunzu@kbin.run 3 points 3 months ago

Where are you getting this information from?

[-] delirious_owl@discuss.online 2 points 3 months ago

Just pour boiling water on them when you clean the kitchen

this post was submitted on 04 Aug 2024
105 points (99.1% liked)

Buy it for Life

4530 readers
29 users here now

A place to share practical, durable and quality made products that are made to last, with an emphasis on upcycled and sustainable products!

Guidelines:

Things that are well-made and durable (even if they won't last a lifetime) are A-Okay!

Unlike that other BIFL place, Home-made and DIY items are encouraged here, as long as some form of instruction is included in the body of the post.

Videos links are not allowed as post titles, but you may use them in a text post.

A limited amount of self-promotion is accepted, IF the item you are selling aligns with this criteria:

  1. The item must be made with sustainable or recycled materials.
  2. If electronic in some way, the item must be open-source.
  3. The item must be user-serviceable (if applicable).
  4. You cannot be a large corporation.
  5. The post must be clearly marked with a [Self Promotion] tag in your title.

founded 1 year ago
MODERATORS
ProdigalFrog@slrpnk.net
SolarMonkey@slrpnk.net