12
Help - Layer delamination (imgur.com)
submitted 1 year ago* (last edited 1 year ago) by nath@lemm.ee to c/3dprinting@lemmy.world
11 comments fedilink hide all child comments

Hi there,

I’m wondering if I could get some advice on why my prints are always failing at 0.2mm layer height

Attached is a pic, the first layers are perfect but as it gets to layer 3-4 I the print does not stick to the previous layers!

Printing at 0.1mm is absolutely perfect, first layer is perfect etc (in my opinion)

Just wanted to have the option for a 0.2mm height so the prints don’t take as long.

Printer is Kingroon KP3S Pro V2 with Klipper Slicer is OrcaSlicer

I can share configs from either if needed, or more close up pics.

Cheers

top 11 comments
sorted by: hot top controversial new old
[-] empireOfLove@lemmy.one 5 points 1 year ago* (last edited 1 year ago)

You may be heavily underextruding on your 0.2mm setting, if it works at 0.1mm. Since the printer depends on extruding the right amount of material to build up to the nozzle tip, if you underextrude it won't build up high enough, and that 4th or 5th layer won't be close enough to the nozzle for the new plastic to be pressed down into it and stick.

Bump up those extrusion rates, slow down the movement feedrates, and make sure your nozzle and extruder motor are all clean and not slipping.

[-] nath@lemm.ee 3 points 1 year ago

That's a good point - I remember calibrating the extrusion multiplier for 0.1mm but not for 0.2mm, never thought that larger layer sizes would need independent calibrations!

[-] empireOfLove@lemmy.one 2 points 1 year ago

Yeah, extruder scaling is not perfectly linear, as you scale it faster the plastic slips more on the drive rolls, the heat input increase means the melt rate will not be perfect, and you have to fight the viscosity of liquid plastic.

[-] nath@lemm.ee 1 points 1 year ago

Brilliant, thanks for the insight! Hopefully orcaslicer has a multiplier for each layer height - not just per filament

[-] empireOfLove@lemmy.one 2 points 1 year ago* (last edited 1 year ago)

I'd assume it does. I've always just used PrusaSlicer so I can't speak to how Orca does it. If it doesn't allow per-height settings, only per filament, you can always duplicate your filaments and just rename them to each layer height they're calibrated for. So you'll have a PLA 0.2, PLA 0.1, PLA 0.07, etc.

[-] Rutty@sh.itjust.works 3 points 1 year ago

Would bumping up your printing temp do anything?

[-] nath@lemm.ee 2 points 1 year ago

It's already running 225 for PLA since it's a hardened steel nozzle, but I tried it on 230 with the same result

[-] Slurpey@lemmy.world 2 points 1 year ago

Is your filament dry? Less than 40% humidity? This happened to me with humid filament

[-] nath@lemm.ee 2 points 1 year ago

Ah really! It could be possible it's too moist - It's been out a month or so. I'll have to invest in a filament dryer. Appreciate the reply

[-] franzfurdinand@lemmy.world 6 points 1 year ago

No need to get a purpose built dryer actually. Your heated bed will actually do exactly what you need. Flip a plastic container upside down over the bed with your filament underneath, set the bed to ~50-60C for PLA, and let it go for a couple hours.

[-] nath@lemm.ee 2 points 1 year ago

Great idea thanks! 😀

this post was submitted on 19 Sep 2023
12 points (100.0% liked)

3DPrinting

15599 readers
94 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee