171
submitted 1 year ago by const_void@lemmy.ml to c/technology@lemmy.ml
top 45 comments
sorted by: hot top controversial new old
[-] agitatedpotato@lemmy.world 101 points 1 year ago

I like how they quickly glance over the fact that you need line of sight to connect and call that a good thing because people behind a wall cant steal your data.

[-] j4k3@lemmy.world 26 points 1 year ago* (last edited 1 year ago)

Within the same room, it is possible to use a frequency of light that will reflect off of almost anything. I just got a window AC unit with a remote that defies physics. Like I can have a desk, and closed plantation shutters (slats and doors) in front of the receiver on the front of the unit, point the remote anywhere in the wrong direction and still activate the thing. It's just an IR LED transmitter setup. I've never seen one that is quite this powerful. It is uber cheapo general electric bottom of the consumer grade junk category too.

This is the NSA's wet dream tech. Anyone with line of sight could intercept the data stream.

[-] agitatedpotato@lemmy.world 13 points 1 year ago

Imagine trying to communicate with your squad but the NSA has a mirror up inbetween the relays

[-] nothacking@discuss.tchncs.de 13 points 1 year ago

For low datarates sure, but at high speeds the dispersion caused by light taking multiple paths will be unacceptable. The reason single node fiber is so thin is to make sure light can only travel along one path. If you want multi gigabit speeds, you will need a direct line of sight.

[-] redcalcium@c.calciumlabs.com 4 points 1 year ago* (last edited 1 year ago)

I put my smart IR blaster behind my tv and it still works. It can even reaches the AC unit in my room if the door is open.

[-] Crackhappy@lemmy.world 0 points 1 year ago

I have a remote for a TV that does the same thing. Can point any direction and it works.

[-] Engywuck@lemmy.ml 5 points 1 year ago

Because it works through Blutooth.

[-] Crackhappy@lemmy.world 2 points 1 year ago

Nah. If I cover the IR emitter, it doesn't work.

[-] Engywuck@lemmy.ml 3 points 1 year ago

Ah, ok. I had misunderstood you at first. Now I get what you meant.

[-] elxeno@lemm.ee 6 points 1 year ago

That's a feature!

[-] Litany@kbin.social 3 points 1 year ago

It absolutely is a good thing when security is concerned. WiFi is easy to snoop even if you're not physically in the room, if you know what you're doing. Sure there are encryption standards that are very good to tamp down on this. However, what's even better with LiFi is you must be physically in the room to intercept any transmissions that are being sent.

This is by design one of the largest advantages to LiFi. There are other practical uses as well, but it's not like LiFi is designed to explicitly replace WiFi.

[-] Sanctus@lemmy.world 30 points 1 year ago

Ma! Theres dust on the Li-Fi sensor again! Ma! You gotta clean it every week for the TV to work!

Yeah this is gonna be great.

[-] harry315@feddit.de 11 points 1 year ago

Apple Cloth will sell like hot cake

[-] FaceDeer@kbin.social 1 points 1 year ago

It's going to be great if you don't imagine it as a one-for-one replacement for traditional wifi and use it in applications that are specific to its strengths and weaknesses.

Also, just how dusty is your house that one week's accumulation is enough to snuff out a signal?

[-] Sanctus@lemmy.world 2 points 1 year ago

I'm making a joke about the article headline. It paints a picture to that it will replace traditional wifi when that is definitely not the case.

[-] Zellith@lemmy.fmhy.ml 24 points 1 year ago

"Advantages of using light rather than radio frequencies"

Nobody tell em how the electromagnetic spectrum works!

Yup, as someone who worked with radar, I'm not really sure what they're trying to say.

[-] Lmaydev@programming.dev 1 points 1 year ago

the key technical difference being that Wi-Fi uses radio frequency to induce an electric tension in an antenna to transmit data, whereas Li-Fi uses the modulation of light intensity to transmit data.

[-] small44@lemmy.world 21 points 1 year ago

It's been like 5 years since the last time I heard about the technology

[-] Jongaros@lemmy.ml 10 points 1 year ago

It is 5 years away from being 5 years away

[-] kakes@sh.itjust.works 4 points 1 year ago

I'm pretty sure I heard about this in high school, over 10 years ago...

Looked it up, and it was first announced in 2011.

[-] massacre@lemmy.ml 4 points 1 year ago

time for a new round of funding - it's only 5 years away!

[-] BurningnnTree@lemmy.one 16 points 1 year ago

Is this expected to be a niche technology, or is it something that regular people will use? Seems like it would be a hassle to make sure that your li-fi receivers are within line of sight of your li-fi transmitters or whatever.

[-] TheRaven@lemmy.ca 9 points 1 year ago

I could imagine it being installed on ceilings within certain rooms. Devices could be connected to both lifi and wifi. If lifi isn’t working it could fall back to wifi. But in reality, I have a feeling this will just be in niche scenarios, yes. I can imagine wifi getting 100x faster before this catches on.

[-] redcalcium@c.calciumlabs.com 2 points 1 year ago* (last edited 1 year ago)

Also, need repeater to reach certain room in the corner? Just strategically place some mirrors and you're golden!

[-] FaceDeer@kbin.social 1 points 1 year ago

They don't even need to look like mirrors to the human eye since this uses infrared.

[-] Glisten6159@waveform.social 3 points 1 year ago

One in the ceiling of every room you want coverage in would be fine. Enterprise grade ones in stores.

More importantly, though, it is more secure and higher performing. Could see the government using this for wireless SIPR rooms. They won’t until the tech is tested and refined first though.

Let the hobby community do that part and the regular consumer will see something very usable in a few years.

[-] NameOfWhimsy@reddthat.com 15 points 1 year ago

This is cool and all, but Wi-Fi and Li-Fi are equally "light-based", it's just using different frequencies. A higher frequency means potentially faster data transmission, but at the cost of faster attenuation. We see this with 2.4GHz vs 5GHz wifi already, and this sounds to me like a more extreme version of that

[-] float@feddit.de 3 points 1 year ago* (last edited 1 year ago)

Yes and no. It's both electromagnetic waves but the frequencies are very very far apart. So far, the techniques we use to emit and receive them are fundamentally different. Their propagation and transmission characteristics are also very different. Also, the data transmission rate (in theory) only depends on the bandwidth of the transmission channel, not the absolute frequency. But there's more "room" for large bands at higher frequencies, of course.

[-] nothacking@discuss.tchncs.de 2 points 1 year ago

At these frequencies, even paper could effect transmission speeds.

[-] shortwavesurfer@monero.town 2 points 1 year ago

Idk. Lifi uses actual light waves which are quite high up the spectrum. For sure Wi-Fi and Li-Fi are both electromagnetic waves, but light itself is a very small section of the EM spectrum. Above that wavelength you get ionizing radiation that gives you cancer and below that is harmless non-ionizing light and radio waves.

[-] Celivalg@iusearchlinux.fyi 2 points 1 year ago

Regardless of if it's on the visual spectrum or not, it's all called light as long as it's electromagnetic radiations

Radio waves are light, gamma rays are light, gravitational waves are not, sound waves are not

[-] Crow@lemmy.world 11 points 1 year ago

So IR blasters were the future all along? Maybe not infrared exactly but it seems pretty similar.

[-] couragethebravedog@lemmy.world 6 points 1 year ago

Hackers gonna start carrying mirrors to cause an outage.

[-] shortwavesurfer@monero.town 6 points 1 year ago

I heard about this tech several years ago. Good to see progress being made

[-] Parsnip8904@beehaw.org 6 points 1 year ago

Radio waves are light too. The article says that they're planning to use near infrared range for Lo-Fi. It will basically be mostly limited to short distances and line of sight. I also wonder how natural light in those frequencies from cooking, exhaust etc. would affect the signal.

[-] nothacking@discuss.tchncs.de 4 points 1 year ago

This is slightly less practical than just connecting your devices with fiber, at least you can run a cable around corners, and your connection won't drop is a piece of paper block the line of sight to the access point.

[-] giacomo@lemmy.world 3 points 1 year ago

Sounds like a cool replacement for point to point WiFi bridges. I wonder what sort of distances start to impact data rates and quality just due to air density or weather.

[-] thisisnotgoingwell@programming.dev 1 points 1 year ago* (last edited 1 year ago)

As I understand, this is very low distance, basically for office settings. What ISPs will do to connect to/provide connectivity to a remote site is install point to point microwave radios. They are not impacted by weather too much, but they do lose signal strength if the radios are misaligned. There have been some funny situations where signals will be out of spec because protected birds like bald eagles are nesting on the radio and it is illegal to disturb their nests, or squirrels are storing acorns in them.

That is what service providers will do if they want to offer cellular connectivity to a small town where running fiber would cost millions of dollars. They will contract a service provider to provide CTBH (Cell Tower Backhaul) via point to point microwave radios. Multiple radios can be used for redundancy / to add bandwidth capabilities by bonding channels together, suddenly they can provide 4g/5g cellular connectivity without needing to spend millions of dollars in installing fiber.

[-] shortwavesurfer@monero.town 0 points 1 year ago* (last edited 1 year ago)

Really depends on the size of the receiver. Its possible to use it at interplanetary distances if we are willing to build a mirror 10s of square miles in size. For point to point my guess would be a few miles. The horizon is the cutoff point for sure so one beam could never be more then the line of sight horizon at the altitude of the receiver for sure.

[-] FaceDeer@kbin.social 1 points 1 year ago

You'd probably need a modified protocol for interplanetary distances, the lightspeed delay would probably cause timeouts and other problems with the usual approach.

A more realistic application might be if there's a way to get the signal up to a Starlink satellite or similar low-Earth-orbit relay. Cloud cover might be a problem for that though.

[-] techviator@kbin.social 3 points 1 year ago

Really makes you think about its "Security through obscurity" approach! 😆😆

[-] kingthrillgore@kbin.social 2 points 1 year ago

I can see LiFI being used in self driving systems as ideally you will always have LOS with other vehicles and it could be useful for signaling.

Otherwise the applications arent great due to LOS.

load more comments
view more: next ›
this post was submitted on 13 Jul 2023
171 points (95.2% liked)

Technology

34984 readers
197 users here now

This is the official technology community of Lemmy.ml for all news related to creation and use of technology, and to facilitate civil, meaningful discussion around it.


Ask in DM before posting product reviews or ads. All such posts otherwise are subject to removal.


Rules:

1: All Lemmy rules apply

2: Do not post low effort posts

3: NEVER post naziped*gore stuff

4: Always post article URLs or their archived version URLs as sources, NOT screenshots. Help the blind users.

5: personal rants of Big Tech CEOs like Elon Musk are unwelcome (does not include posts about their companies affecting wide range of people)

6: no advertisement posts unless verified as legitimate and non-exploitative/non-consumerist

7: crypto related posts, unless essential, are disallowed

founded 5 years ago
MODERATORS