[-] Fisch@lemmy.ml 53 points 6 months ago* (last edited 6 months ago)

I hope GTK and GNOME (or is GTK part of GNOME?) adopt this, I didn't even know just how bad the inefficiency with todays cursors is. Having a single svg for each cursor and rendering it server-side makes so much more sense.

Did someone already open an issue for this?

28
submitted 6 months ago by Fisch@lemmy.ml to c/3dprinting@lemmy.world

I want to buy a 3D printer for about 200-250€ but I'm unsure which one to get. There are printers that a lot of people recommend but others say they're a piece of garbage.

The ones I found so far are these:

  • Creality Ender 3 V3 SE - 182,94€
  • Anycubic Kobra 2 Neo - 199,00€
  • Sovol SV06 - 239,00€

There's also the open source firmware Klipper, which a lot people recommend but from what I understand, you need a Raspberry Pi for that. I do have a Pi 4 that I was planning to sell that I could use for that instead.

Would be great if some of you who know more than me could help me decide what to get.

[-] Fisch@lemmy.ml 64 points 6 months ago

It started getting popular years ago and that's when me an my friends switched to it too (back when I didn't know shit about privacy). You gotta keep in mind the alternatives back then were Skype, which was meant for 1 to 1 calls, had shit audio quality and issues all the time and TeamSpeak, which was complicated because you needed a server (we were kids, we only knew what a server was from Minecraft) and had a text chat that was only a small part of the bottom of the window that was full of connected and disconnected messages, so I actually didn't even know you could write in that. TeamSpeak's interface also isn't exactly good-looking or very intuitive. Then came Discord, you could create a server for you and your friends for free, you saw who of your friends was online and playing what, you could see when someone was in a voice channel and could just join, you had multiple text chats where you could easily send a link or memes while playing and you could easily share your screen with the others. It was a major improvement over the other two. I know that it sucks from a privacy standpoint but there's good reasons why people started using it.

[-] Fisch@lemmy.ml 43 points 6 months ago

AV1 is a good example of a non-proprietary protocol replacing proprietary protocols (h.264, h.265, ...)

40
submitted 6 months ago* (last edited 6 months ago) by Fisch@lemmy.ml to c/selfhosted@lemmy.world

My current setup consists of a Raspberry Pi 4 with 4gb RAM and a 1tb external SSD. I'm thinking of getting a used mini PC for around 100€ to replace that tho because it would give me a lot more power and especially RAM (I currently need to use an 8gb swap file). My plan so far is to get a used mini PC that's quiet, has a built-in SSD and at least 8gb of RAM (16 would be better). Because of the built-in SSD, I could also sell the external SSD and buy an 8-12tb HDD instead.

Does anyone have recommendations for what mini PC to get or things that I should look out for?

Edit: Thanks for all the help! I decided on the Firebat T8 Pro Plus with 16gb RAM and 512gb internal storage because that really seems to be perfect for my use case.

11
submitted 6 months ago by Fisch@lemmy.ml to c/selfhosted@lemmy.world

The major thing keeping me from self-hosting my music is that I mostly discover music by using the radio function in ViMusic (Uses the YT Music API to stream music) or by finding a song through friends, social media, etc. and then listening to it in ViMusic to see whether it's good and I want to add it to my playlist.

Not having the radio function wouldn't be that big a deal but having to wait for a song to download before being able to listen to it could be very annoying, depending on the situation.

So my question is: Is there some way to have a Subsonic server where I'm able to search for any song from a client and have the server stream it from something like YT Music when it's not downloaded?

[-] Fisch@lemmy.ml 46 points 6 months ago* (last edited 6 months ago)

A VPN is enough for torrenting, as long as the VPN provider isn't logging. I personally use AirVPN because they have port-forwarding but I've used Mullvad before. I also live in Germany and I've never gotten in trouble.

The guide you linked seems a little outdated, Jackett has been replaced by Prowlarr, which is there to have a central location to manage your trackers. If you plan to use Jellyfin, you should also use Jellyseer instead if Overseer. The *arr services are the ones that actually search for the files to download by using the trackers you set up in Prowlarr. You don't need all the *arr services, I only have Sonarr and Radarr, which are for shows and movies respectively. I also have Bazarr for subtitles. AdguardHome is only for ad-blocking, might be useful to you but isn't needed. Idk why that's even in the guide. Flaresolverr is something I've never heard about and I don't use it, so I can't tell you anything about that. Heimdall is something I don't need because I use YunoHost, which has a dashboard already but it might be useful to you.

[-] Fisch@lemmy.ml 38 points 7 months ago

I was thinking of Augmented Reality and was very confused

[-] Fisch@lemmy.ml 55 points 7 months ago* (last edited 7 months ago)

Or just force all subscriptions to allow you to cancel with one click

1
submitted 9 months ago by Fisch@lemmy.ml to c/ublockorigin@lemmy.ml

I'm already blocking it but manually unblocking stuff every time I visit a new webpage is getting kinda annoying. Does it make that much of a difference? Do you think it's worth the hassle?

29
submitted 9 months ago* (last edited 9 months ago) by Fisch@lemmy.ml to c/piracy@lemmy.dbzer0.com

I want to run only qBittorrent through my VPN but with my current setup, I have a namespace for OpenVPN and qBittorrent runs entirely through it. The issue with that is that Sonarr and Radarr can't access it. Because of that, I would like to switch my setup to use a network interface instead. What would be the best way to do that?

Edit: I used this guide, with some changes to make it work on my setup, to set it up. I can also post my docker-compose file here if anyone's interested.

1
submitted 9 months ago by Fisch@lemmy.ml to c/postmarketos@lemmy.ml

I want to install PostmarketOS on my Xiaomi Mi 9t but, as it say on the wiki page, it's not in the repositories, so I can't just select it in pmbootstrap. How do I install it then?

[-] Fisch@lemmy.ml 32 points 10 months ago

Where they really need to improve performance is on mobile. On my old phone, I never really noticed how bad it was aside from the high energy usage reported by Android for Firefox. I recently got a new phone tho, which has a 120hz screen and yesterday I tried Cromite, a Chromium fork for Android, which improves privacy and adds adblock. I tested it against Firefox (Mull to be precise), which is what I use as my default browser, and I noticed that scrolling pages was way smoother on Cromite. First I thought that maybe Firefox is just running on 60hz but scrolling through settings and the like was perfectly smooth, just webpages felt laggy. This means that Firefox is simply very slow at rendering pages on mobile, to the point that it can't keep up with my screens refresh rate at all.

Firefox on desktop is great and I really wanna use it on mobile too but I'm honestly contemplating just switching to Cromite. The only feature I'm missing in Cromite, that I can get for Firefox with the extension Libredirect, is redirecting to privacy respecting and lightweight frontends / proxies, like Reddit to Libreddit but it might be possible to add a userscript to Cromite with that functionality.

[-] Fisch@lemmy.ml 100 points 10 months ago

I think it's important to mention that this isn't an issue EVs have but an issue Teslas in particular have. They seem to have a really bad build quality from what I hear.

1
TorrentLeech open for signup (www.torrentleech.org)
submitted 10 months ago by Fisch@lemmy.ml to c/opensignups@lemmy.ml

Invitation Code: FLREFUGEE

[-] Fisch@lemmy.ml 39 points 10 months ago

I've heard OpenStreetMap isn't that good in the US because there's just not enough volunteers there. In germany, however, it's more up to date than Google Maps from my experience, aside from stores and the like. Routes on Organic Maps are the same as on Google Maps here.

352
submitted 11 months ago by Fisch@lemmy.ml to c/lemmyshitpost@lemmy.world
107
submitted 11 months ago by Fisch@lemmy.ml to c/privacy@lemmy.ml

For open source messengers, you can check whether they actually encrypt your messages and whether the server has access to your encryption keys but what about WhatsApp? Since it's not open source, you can't be sure that the encryption keys aren't sent to the server, right? Has there been a case where a government was able to access WhatsApp chats without reading them from the phone itself?

1
submitted 11 months ago* (last edited 11 months ago) by Fisch@lemmy.ml to c/opensignups@lemmy.ml

General tracker

11
submitted 11 months ago* (last edited 11 months ago) by Fisch@lemmy.ml to c/usenet@lemmy.world
[-] Fisch@lemmy.ml 45 points 11 months ago

I'm not even willing to use it for free 💀

8
submitted 1 year ago by Fisch@lemmy.ml to c/selfhost@lemmy.ml

cross-posted from: https://lemmy.ml/post/4448974

I've recently started using a self hosted SearXNG instance but I'm still using the search engines enabled by default (google, duckduckgo and qwant). What search engines do you have enabled or which ones do you feel you've gotten the best results with?

[-] Fisch@lemmy.ml 42 points 1 year ago

So they literally have to pay people to use bing?

[-] Fisch@lemmy.ml 57 points 1 year ago

Yes, it's called Funkwhale

view more: next ›

Fisch

joined 3 years ago