I find spending a bit more on batteries goes along way. Although the nominal voltage and size may be the same, better batteries have lower internal resistance, ie provide the same current with less voltage sag. This prevent the low bat detection from tripping prematurely.

People who have to use the best tools, use the best tools. In other news: water confirmed to be wet

There are plenty of tradesmen working on weekends without reporting it to tax authorities. Common in cities, practically the norm in rural areas. Time spend working doesn't leave a paper trail and whoever hired them can buy all the materials for "personal use". Farmers do need to buy supplies, but unless they have John Deer equipment, the harvest amount will not be automatically counted, and it's trivial to sell some part of it on non-official markets.

I think it all hinges on how fast people get used to using monero "for real" and not only to buy some merch or for other meme purposes. When regulations come down, the people who will be hit the hardest are those bridging between fiat and xmr, because their banking activity can be moderately easy controlled.

nonkyc.io requires javascript to run, which is suspicious considering the purpose of the site

I have used them back when they cost 3.5€/mo instead of the 5€/mo you pay for mullvad or ivpn. Gave them a try specifically because the support XMR, and it worked flawlessly for each of the 5 (?) payments I made. Service is fine, no complaints, but the desktop app is shit. Can't easily configure local bypass which is supported by mullvad/ivpn. At the new pricing their offer doesn't really make sense anymore.

A slight heating is perfectly normal and nothing to worry about. A microwave is fine tuned to heat food, or more precisely the water within. Other materials such as the glass on the back of the phone also absorb some energy, but only a tiny fraction.

I am aware of the basic arguments behind inflation/deflation, and neither is good in excess.

Typically central banks targets inflation of 2% these days, but we all know the real inflation for necessities is far higher (>4%). Inflation disproportionately affects the poorer - rich people have the fast majority of their wealth "stored" in stocks or real estate, which rise in valuation as people rush into these markets to protect the little they have. I'd argue that inflation rates are artificially pushed far higher then is sustainable, simply because those who decide are the same people who benefit the most.

I consider a low but predictable inflation rate about 1% ideal (0-2% is acceptable short term variation) for the following reasons:

• No one has to worry about debasing/devaluing your currency by injecting more supply.
• Nobody "passively" gains wealth by sitting on it.
• If you want to keep your wealth, you have to take some risk and use it.
• Inflation rate is not so high, that you need super high risk investments to keep up, making it more accessible to small players.
• Large player can not as easily game the market by skimming of value from the lower to upper middle class.

Yes, this idea is not without risks. But the way I see it the forced "we have to improve value by 2% every year" exponential grow can only go on so long before we (humanity) hit the finite limits of this planet.

At least with the government you can vote the bastards out.

In theory. In reality all parties serve the same lobbyists.

Which breakthrough do you mean? Can you rephrase your question?

very useful, much appreciated

A lot of people here commented "I do X and it works for me", but I do not think that is good advice. While it might work fine for that person, there are too many variables that are ignored. Ambient humidity, filament type, printer model, slicer settings, model geometry/details - all of this has an impact on the final print quality.

A more controlled environment removes variables and therefor makes the print result more predictable. Drying filament and storing it properly takes a bit of effort, but it is easy step towards better results.

You don't even need a dedicated dryer, just use your printers headbed, put 1-3 spools on it and a cardboard box with a few vent holes on top. Set the temperature according to the filament and let it run for 8 hours. Afterwards put the spools into a sealed container (4L cereal box works great), add some silica gel and your done. When it cools back down the relative humidity drops below 10% RH, which is so low that most hygrometers wont even measure it.

I'm casually printing PETG at 260°C, over 20mm³/s (about 300mm/s) and archive reproducible near perfect results with next to no stringing. With bare PLA drying may not matter, I've too little experience to give a definitive answer. If you have any composite filament (wood, carbon, sparkle, etc) you definitely should dry it anyway, because you do not know how much the filler changes the properties.

Oh and finally: I place new spools in containers with dry air (a tiny bit of silica gel in them) and measure the equalized humidity after a few days. Most spools were delivered with a humidity of 15-20% RH

Greetings from our instance monero.town :)

First things first, you do need a wallet to receive, store and send monero. Good options are:

• official GUI wallet from getmonero.org (PC)
• cake wallet (android, IOS)
• monerujo (android)

Second if you do any open source work, consider putting up a donation address. Donating with Monero is easy, cheap and quick, which makes it a nobrainer. Depending on what you do, you might want a separate wallet for that (maximum anonymity), otherwise a sub-account or sub-address give sufficient private for most users.

Finally if you need larger amounts to spend, you need some exchange. The most popular P2P one is localmonero.co, trocador.app is great if you have other crypto already and kraken.com is the best KYC exchange.

Have fun, and feel free to ask any of us if you have any other questions.