In order:

Finished building a wood “skirt” for under my daughter’s bed frame (to prevent her cat from using Underbedland as her jungle gym in the middle of the night). Used 1x5 pine. Cut some decorative edge work on the pieces. I attached the skirt that goes on the long edge of the bed with hinges (recessed into the skirt), so that she can lift up the skirt and store stuff under the bed. I put on magnetic latches so cat can’t do the same. Stained it and finished with polyurethane. It was gold practice on finishing work.

Took apart the passenger door of girlfriend’s truck and fixed a bunch of stuff. I disassembled and cleaned the window switch (yay, the window rolls up again!). Cleaned and lubed the window mechanism. Spliced two cut wires on the door lock. Replaced some missing bolts. Rewrapped wire bundles. Wrapped loose wires. Rerouted wires so they wouldn’t get cut again, made and installed a vapor barrier (the original was MIA). After seeing how bad things were in that door, I need to do the other doors too.

Started some serious setup work on an acoustic guitar (Gibson hummingbird). Fret height was pretty variable. I leveled the frets. Started recrowning all the frets - got through half of them. Once I finish recrowning, Next will be setting neck relief, cutting nut slots deeper (first fret action is currently atrocious), adjusting the bridge down, and maybe some intonation work.

Fully disassembled a Walter Creed 9mm pistol that somehow had sand inside it. Thoroughly cleaned everything, oiled, and reassembled. I seem to have fixed it, but haven’t tested everything yet.

Designed a folding adjustable arm rest to mount on top of the center console of my truck. (Designed, not built. Yet)