317
original post: https://mk.moth.zone/notes/a8zer7ypj6uv02ka
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 14 Jun 2025
317 points (96.2% liked)
Linux
7921 readers
924 users here now
A community for everything relating to the GNU/Linux operating system
Also check out:
Original icon base courtesy of lewing@isc.tamu.edu and The GIMP
founded 2 years ago
MODERATORS
That does not make sense. Batteries cannot be charged and discharged at the same time - they are either charging or discharging or neither. When a device is in use while it is plugged in the device is being run directly from wall power - and anything left if sent to charge the battery. The only devices that don't do that is ones that power off while the charger is plugged in - which does not include any laptop that I have ever seen, generally just smaller devices.
Modern laptops have smarter controllers that can turn off charging before the battery is full or when other conditions are met. But none are able to draw power from the battery while the battery is being charged - that just does not make any sense.
Laptops run on "burst" computing profiles in a lot of engineering situations, occasionally this applies to both the thermal design (runaway heatsoak if used at full tilt) but also battery design. I've seen several machines that will dip into their battery in addition to the charger to boost performance and dump wattage into the chips beyond what would be available from the adapter alone. I don't necessarily think it's good design, but modern battery chems don't really give a shit about up/down momentary charge cycles. Also the Chem they're using is not LiPo based as that chemistry while allowing for significant amperage to be drawn, is not stable enough for a laptop that is generally expected not to ignite.