Hardware to run 30 Cameras ? (lemmy.world)

submitted 2 years ago by Lobotomie@lemmy.world to c/homeassistant@lemmy.world

18 comments fedilink hide all child comments

So I have about 30 Cameras I want to run on my instance. Step by step all of them will record their videos on a local sd card and I will only watch the stream over HA (no hardware nvr). How can I set this up so my phone/laptop will not struggle at all loading these streams?

Right now I am playing them using onvif and or fmpeg and all of my hardware starts to lag heavily when I open the camera sites.

The streams are split up over 3 pages so it's 13/10/7 Streams each.

you are viewing a single comment's thread
view the rest of the comments

[-] Lobotomie@lemmy.world 2 points 2 years ago

I am recording the footage its just saved locally on each camera sd card. Right now I am running most of them via webrtc and the dashboard basically break both my laptop and phone (both just basically freezet up)

this post was submitted on 16 Oct 2023

18 points (95.0% liked)

homeassistant

15419 readers

7 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world