149
These cheap scissors are held together with a screw (instead of a rivet), which means they can be tightened when they get loose and sharpened when they get dull. (www.scotchbrand.com)
submitted 11 months ago by plenipotentprotogod@lemmy.world to c/buyitforlife@slrpnk.net
34 comments fedilink hide all child comments

I'm aware that the plastic handles probably disqualify these from being true "buy it for life", but the exciting thing for me is that they are relatively cheap and can be found on the shelf in most stores with an office supply section. It's an unfortunate reality that the vast majority of BIFL items are special order and cost several times more than their mainstream equivalent, so I wanted to shout out Scotch brand for maintaining such good serviceability on an item you can literally pick up at Walmart.

I just pulled apart a pair of these which was cutting horribly, gave each blade a couple passes on an oil stone, then reassembled and tightened them up with a drop of oil in the joint. They cut as well as the day they were bought, and the handles are still in good shape so I could see doing this several more times before I even have to consider replacing them.

you are viewing a single comment's thread
view the rest of the comments
[-] ghost_towels@sh.itjust.works 21 points 10 months ago

I am an industrial seamstress and have been using the same pair of scissors for 20 years. Not everyday as I’ve had some other jobs here and there, but they are still my go to for anything sewing. They are Wiss 10”. Under $100 bucks and very much worth it.

That being said, if you can take these apart and sharpen them then that’s a good deal!

[-] Peppycito@sh.itjust.works 9 points 10 months ago* (last edited 10 months ago)

I have Wiss and like them. I have Mundial and like them. I bought some Kai and freakin' love them. Way, way lighter (to abate that repetitive stress) and super sharp. A little harder to sharpen because the steel is so hard and when they chip they chip bad, but they are amazing. Highly recommended.

Also an industrial seamster

[-] PsychedSy@sh.itjust.works 5 points 10 months ago

I used Kai for the sew shop, but they also use them to cut carbon fibre pre-preg.

[-] ghost_towels@sh.itjust.works 4 points 10 months ago* (last edited 10 months ago)

Yes! I have a smaller pair of the Kai and you are not wrong about them. So damn sharp. I use those for small precise cuts. I’d like to get a bigger pair but then I’d feel like I’m cheating on the Wiss. Which is ridiculous lol.

Also, what kind of seamster? I’m a sailmaker, but I’ve “retired” from that and just sew for myself now.

[-] Peppycito@sh.itjust.works 4 points 10 months ago

Another boat industry professional! I make marine canvas and upholstery!

[-] ghost_towels@sh.itjust.works 4 points 10 months ago

Nice!! I never got too much into canvas, just the stuff that goes with sails. Sailcovers and stack packs, winch covers, that kind of thing. Nothing with frames. That’s some 3D wizard magic right there! Always so impressed with beautiful canvas. Really cool the 3D modeling stuff some of the guys near me are using for patterning, so precise. I do need to make a new dodger, bimini and enclosure for my boat so I’m going to be doing it whether I like it or not soon! Also cushions.. lol

[-] Peppycito@sh.itjust.works 2 points 10 months ago

There's certainly a mystique around canvas. Some of it is deserved, there is a lot to learn. Patterning is definitely the hard part. I use paper, I make a big paper bag and draw seam and zipper lines on it. There's a thousand ways to skin a cat as they say. I'm not sold on the 3D modeling. $100k to get started and in the end you still throw it a sewer, all your precision can get lost at the last step. It's only really worth it if your doing production, manual patterns are way faster for one offs. I'd suggest spending money on scissors and materials and learn from your screwups. You'll be way further ahead than the learning curve involved in the modeling.

[-] ghost_towels@sh.itjust.works 2 points 10 months ago* (last edited 10 months ago)

Oh wow! That is sharp! Beautiful work! Patterning definitely seems to be the secret ingredient. And yes, from my looking into it everyone has a different way. Way back in the 90s the shop I worked in had the sail service and canvas in the same area so I would help the guy that did all the patterns and frames sometimes. He used heavy poly for the patterns. Very cool to watch and learn from. Unfortunately I never did more after that to cement it in my brain. I’ll be patterning for mine, not worth all the fuss with the 3D stuff for just my own job. Also I want to make a hard Bimini so everything is going to get changed up anyways.

The guys I know do know how to pattern but they’re young uns and very tech savvy so they have modified to suit their needs. Use a camera they already have and take a bunch of pictures, run that through the modeling software and then flatten it and send it to their plotter. I don’t think they spent more than 15k for plotter and software? Also one of them is the sewer so already informed of the project. Works for them but I feel that you should know how to pattern first as well. They are trying to get set up for people to send their files to them and then they can cut and send back.

Sorry for the late response, whole family got hit with Covid, just surfacing now.

this post was submitted on 25 Dec 2023
149 points (95.2% liked)

Buy it for Life

4502 readers
1 users here now

A place to share practical, durable and quality made products that are made to last, with an emphasis on upcycled and sustainable products!

Guidelines:

Things that are well-made and durable (even if they won't last a lifetime) are A-Okay!

Unlike that other BIFL place, Home-made and DIY items are encouraged here, as long as some form of instruction is included in the body of the post.

Videos links are not allowed as post titles, but you may use them in a text post.

A limited amount of self-promotion is accepted, IF the item you are selling aligns with this criteria:

  1. The item must be made with sustainable or recycled materials.
  2. If electronic in some way, the item must be open-source.
  3. The item must be user-serviceable (if applicable).
  4. You cannot be a large corporation.
  5. The post must be clearly marked with a [Self Promotion] tag in your title.

founded 1 year ago
MODERATORS
ProdigalFrog@slrpnk.net
SolarMonkey@slrpnk.net