19
Next DIY NAS (lemmy.ml)
submitted 9 months ago by monty33@lemmy.ml to c/selfhosted@lemmy.world
22 comments fedilink hide all child comments

Hi all,

I am looking at building my next NAS. My current will move to offsite, and the new will be primary. I previously used this motherboard, and was planning to go with that again. Then I saw this one, which seems like a better option. It has a slightly better CPU and a PCIe slot, but can only have 32GB memory max compared with 64GB max on my current.

Am I missing anything or is this a no-brainer to switch to the N100 board?

you are viewing a single comment's thread
view the rest of the comments
[-] qaz@lemmy.world 2 points 9 months ago* (last edited 9 months ago)

The N100 only has 9 gen 3 PCI lanes. The board has 4 USB ports (2 x 3.0), 4 2.5G ethernet ports, 2 m.2 slots and 6 SATA connections. They might be using a PCI splitter chip to connect all components, which depending on the type and how it's used could have a big effect on I/O performance.

EDIT: The N5015 from your previous board only has 8 lanes. What was your max read/write speed on it and did you see anything strange in lspci?

[-] monty33@lemmy.ml 1 points 9 months ago

What is the best way to check max read/write speed? Here is the output from lspci. Do you see anything strange?

00:00.0 Host bridge: Intel Corporation Device 4e24 00:02.0 VGA compatible controller: Intel Corporation JasperLake [UHD Graphics] (rev 01) 00:04.0 Signal processing controller: Intel Corporation Dynamic Tuning service 00:14.0 USB controller: Intel Corporation Device 4ded (rev 01) 00:14.2 RAM memory: Intel Corporation Device 4def (rev 01) 00:15.0 Serial bus controller: Intel Corporation Serial IO I2C Host Controller (rev 01) 00:15.2 Serial bus controller: Intel Corporation Device 4dea (rev 01) 00:16.0 Communication controller: Intel Corporation Management Engine Interface (rev 01) 00:17.0 SATA controller: Intel Corporation Device 4dd3 (rev 01) 00:19.0 Serial bus controller: Intel Corporation Device 4dc5 (rev 01) 00:19.1 Serial bus controller: Intel Corporation Device 4dc6 (rev 01) 00:1c.0 PCI bridge: Intel Corporation Device 4db8 (rev 01) 00:1c.1 PCI bridge: Intel Corporation Device 4db9 (rev 01) 00:1c.2 PCI bridge: Intel Corporation Device 4dba (rev 01) 00:1c.4 PCI bridge: Intel Corporation Device 4dbc (rev 01) 00:1c.5 PCI bridge: Intel Corporation Device 4dbd (rev 01) 00:1c.6 PCI bridge: Intel Corporation Device 4dbe (rev 01) 00:1c.7 PCI bridge: Intel Corporation Device 4dbf (rev 01) 00:1e.0 Communication controller: Intel Corporation Device 4da8 (rev 01) 00:1e.3 Serial bus controller: Intel Corporation Device 4dab (rev 01) 00:1f.0 ISA bridge: Intel Corporation Device 4d87 (rev 01) 00:1f.3 Audio device: Intel Corporation Jasper Lake HD Audio (rev 01) 00:1f.4 SMBus: Intel Corporation Jasper Lake SMBus (rev 01) 00:1f.5 Serial bus controller: Intel Corporation Jasper Lake SPI Controller (rev 01) 01:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03) 02:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller 03:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03) 04:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 06:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 07:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)

[-] qaz@lemmy.world 1 points 9 months ago

lspci looks fine, I don't see anything strange.

I usually just use dd to check write speeds.

this post was submitted on 09 Feb 2024
19 points (91.3% liked)

Selfhosted

40153 readers
269 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz