226

Mine was our CRT TV. I would rapidly push the power button on and off because I thought the picture coming and going looked cool but eventually it fell inside of the TV. I think I later stuck a magnet on the TV.


Not looking for Reddit answers like "My parent's marriage"

you are viewing a single comment's thread
view the rest of the comments
[-] Bartsbigbugbag@lemmy.ml 90 points 8 months ago

A brand new multi thousand dollar video camera that my pops had saved up for. I disassembled it entirely, just trying to figure out how it worked. He wasn’t even mad at me. I grew up and now can fix just about any electronic down to the component level. I like to think he saw the curiosity in me and was more proud than anything.

[-] weeeeum@lemmy.world 56 points 8 months ago

Huge respect for pops for not disassembling you.

[-] Bartsbigbugbag@lemmy.ml 7 points 8 months ago

For real. He could have very reasonably been very angry at me, and it might have defeated my curiosity before it really got a chance to get going, but by doing what he did, he associated it with good feelings that continued through until now.

[-] UnRelatedBurner@sh.itjust.works 15 points 8 months ago

I love this lil' story, thanks for sharing

[-] flubba86@lemmy.world 15 points 8 months ago* (last edited 8 months ago)

When I was around 14, my parents got my sister and I a 2nd hand Xbox (the OG big square Xbox), but we were too poor to buy any games for it. I used to rent the games from blockbuster for three days at a time.

I was fascinated with electronics, I'd build little radio kits and LED chasers, I was okay with a soldering iron. I was researching mod chips online, to play burned games. The guides on installation emphasised how small all the solder points are, and how fine the wires are, that it's not a job for a beginner. But I thought it would be fine.

I tried to order a modchip online, but the site didn't deliver to Australia. I remember seeing people advertising in the news paper classifieds section modchipping services, so they must be available somehow. I called one of the guys, but he said he only sold them as part of installation, couldn't sell me just the modchip. I called a couple others, but none wanted to talk to a 14yo kid.

My parents caught wind of what I was trying to do, and they offered to pay to send it to the guy to get it done. So we just went with that. I was disappointed I didn't get to do the installation myself.

The next week, we got our Xbox back, turned it on, and played a couple of burned games, it worked great. But I was curious. Did the guy do a good installation job? What gauge wires did he use? Which brand and model modchip did he use? I was full of questions. So while my parents were out I opened the Xbox up, disassembled it right down to the motherboard. I found the modchip, I was fascinated by how small it was, how fine the wires were, and how tiny the solder points were. It all looked so fragile. It looked like the guy had done a pretty good job.

I put the Xbox back together, went to play it, but it wouldn't read any discs, not even genuine discs. Weird, did I forget to plug something back in on reassembly? I opened it up and found the disc drive cable was slightly unplugged. Plugged it in, reassembled, and tried it again. This time it read genuine discs, but it wouldn't play any burned discs. I tried for a while, and it was like the modchip wasn't working. That was when my parents got home. I was so angry and frustrated with myself, my mum asked what the matter was, and I started sobbing and crying furiously, I said "why can't I leave things alone?" and "Why do I always have to take things apart?" and "Why didn't I just enjoy the games?".

A couple days later I had calmed down enough, I opened the Xbox up again, and had another look. I saw the problem immediately. One of the tiny hair-like wires on the modchip had popped off. Maybe because of my previous poking around in there, or maybe it just came off by itself, idk. Luckily it was on the modchip side, not on the motherboard side, so there was a relatively large pad to solder it back onto. Still smaller than anything I'd soldered before, but I gave it a go. It took about an hour, with my oversized non-temperature-controlled soldering iron, but I got it soldered back in place. While was there I resoldered a couple wires alongside it, so they were more secure too. I was shaking with anticipation when I put it all back together yet again, and fired it up. It worked! Played burned games again! I was so happy I was crying. The awful low from days before transformed into an amazing high of achievement, and gratification.

My parents told me the lesson was to never take things apart, leave well enough alone. But they were wrong.the lesson was far greater. It gave me the self confidence to know I can fix things. Yes I can and will break things, but I can fix them. I somehow absorbed that into my identity. From then on I was always trying to fix things. Phone line died, I repaired it. Computer got a virus, I formatted and reinstalled the OS. Lawn mower wouldn't start, I cleaned and rebuilt the carburettor, didn't know what I was doing, but I just did it, because I had the confidence. Then at age 24 I got a job as an electronics repair technician, so it worked out for me.

[-] Bartsbigbugbag@lemmy.ml 5 points 8 months ago* (last edited 8 months ago)

That’s a great story! An Xbox mod chip was my first soldering job! It was a Team Xecutor chip, and I too used an old, terrible iron. I’m honestly not even sure how I did it, when I got more into soldering later, and looked up that chips installation process, I was amazed I was able to do it. My dad got me the mod chip even though he hated gaming because he thought correctly that it would be a great learning opportunity for me. He always supported my curiosities and hobbies. I’ve got to go thank him now. Thanks for sharing the story with me.

[-] tetris11@lemmy.ml 10 points 8 months ago

or he's doing the long con, and waiting till you buy something expensive so that he can disassemble it "out of curiosity" to test your reaction

[-] flubba86@lemmy.world 2 points 8 months ago

Was it long enough ago that he could simply take it back to the store and have them reassemble it for him? Or did he reassemble it himself? Or did you try to reassemble it? You've left me hanging on the edge of my seat!

[-] Bartsbigbugbag@lemmy.ml 3 points 8 months ago

It was done for, he got another one but it wasn’t nearly as expensive. It wouldn’t be for quite a few more years before I learned how to non-destructively disassemble things, and I didn’t have access to many tools. I can barely remember now but I’m pretty sure I used a butter knife to get out screws and pry stuff open. I just didn’t understand how a little box could record videos and I had to try to figure it out. I was probably 7 or 8, based on where I lived when it happened.

this post was submitted on 25 Apr 2024
226 points (95.9% liked)

Asklemmy

44151 readers
1860 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS