2189
Never again
(lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 20 Aug 2024
2189 points (99.3% liked)
Microblog Memes
5846 readers
869 users here now
A place to share screenshots of Microblog posts, whether from Mastodon, tumblr, ~~Twitter~~ X, KBin, Threads or elsewhere.
Created as an evolution of White People Twitter and other tweet-capture subreddits.
Rules:
- Please put at least one word relevant to the post in the post title.
- Be nice.
- No advertising, brand promotion or guerilla marketing.
- Posters are encouraged to link to the toot or tweet etc in the description of posts.
Related communities:
founded 1 year ago
MODERATORS
Trim it down to one of each cable. You don't need a half-dozen patch cables. That weird wall-wart with the proprietary DIN plug for the laptop you no longer have, or the voltage- and milliamp-specific application you'll never need. The 4 SATA cables...etc.
Pare it down in order of likely need. You might need a couple USB cables and maybe a couple SATA cables, but you don't need 3 34-pin floppy drive ribbon cables.
I threw out about a dozen DC adapters last month (2 replaced in use adapters, another ~10 in "the box") after finding these USB C PD to various voltage and amp DC barrel plugs on Amazon:
https://amzn.eu/d/h7UBsKI
There's tons of kinds, and they're probably a fire hazard, but I can buy a USB-C PD power strip and some short 6, 8, and 12 inch USB-C cables to power my dsl router, wifi AP, raspberry pi, and NUC, all with one wall outlet and none of the cable mess.
If these are USB-C driven, how can you shift the volts or amps? Won’t you need a separate USB-C PD charger to drive these adapters?
Yeah. A 7 port USB wall charger.
https://amzn.eu/d/iFddaVv