This sounds eerily like the motto of conspiracy theorists when you start to ask too many questions.
I was in my early 20s when I started. Wanted the calming effects of nicotine, was into other similar interests, and was dating someone who also got into it. He was actually the second vaper I'd dated, so you could say it took me a while to be interested.
I'd had a couple cigs before but I never considered myself a smoker and didn't take to it. Vaping became a huuuge hobby for me. Learning about different mods, building your own coils, DIY e-juice, etc. I was vaping all day, all the time, pretty much as soon as I woke up (at the lowest amount possible though). It was a nice flavor and chemical pick me up when I was on edge. Sort of like a physical distraction. I vaped for 5 or so years. The lasting effects I've noticed are that sometimes I miss it. That's it. It was pretty hard to quit, mostly because I didn't want to. I had a lot of resistance, because it became a passion for me. But nicotine regulations started to suck, and that same partner quit as well. I got really sick with a flu and didn't vape during it. Then, I didn't start again after I got better. I had dreams about it, and it took a bit for me to want to move on.
The thing is, though, I don't feel any different now than when I was vaping constantly. It doesn't improve your life that much. It'd be great if it could be an occasional thing, like alcohol or dessert is, but it's hard to not do it all the time if you're doing it at all. And you get to an equilibrium where it just doesn't feel that strong. Hence the constant clouds.
The most annoying part about it is that it becomes like a security blanket. You have to take it everywhere. Forget it for work? Guess you'll just be late today. Have to sit for a movie? Man it sucks not to vape inside. Flying for hours? What a nightmare, can't wait to land and go outside.
It was annoying to not feel myself if I ever decided to leave my vape behind. And blowing clouds out of my car was great, but it sucked having to wipe down my car windshield all the time due to the glycerin condensation. Same with inside -- no smoke on the walls, but the glycerine would hang around and I'd have to run an air purifier. I'd often worry about the vapor leaving slight residue all over my apartment, belongings, monitors, PC internals and such.
Overall, it was great for a while as it was something I got really into, but it was also a lot of money and stress over something that didn't really benefit my life the way other hobbies still continue to do. Much better to be a free person unattached from adult security blankets. 😎
I was just thinking about this the other day. It's weird how Google has become so unusable due to its own practices that it seems to be giving up on being a search engine. I've been getting spam pop-ups lately on mobile search asking me to use AI. Of course people will wanna use it, they can't find their answers normally anymore. You search for something and it'll show you something completely unrelated because it's trying to be "helpful" and corral you towards buying shit, and it doesn't even do a good job at that. Heaven forbid you start to look past the first 3 pages.. I don't have a clue how these websites in the search results are maintained when they're filled solely with spam and nonsensical gibberish. I'm totally with you. We used to actually see communities around and now it seems like they've fallen into the dark web, unfindable except by means of knowing someone who knows someone or, frustratingly, reddit. Paradoxically, it's like the random AI-generated hash from the dark web is now here clogging up the tubes. I feel like everyone else came along and started dumping trash everywhere because we didn't put up any signs or make any rules not to litter.
This is just one perspective, but people-pleasing is when you go overboard with being considerate of others -- to the point that you lose yourself. So like the one friend who will say they like all the same things as you, say yes to everything, never disagree, etc. just because they desperately need you to like them. They don't have boundaries, so even when someone hurts them, they're like "it's okay, I don't mind!" They're missing a bit of self-respect.
There's nothing wrong with being kind or considerate of others! It's really important to have to form deeper relationships. The problem is when seeming 'nice' takes the place of your personality or being honest about your real self, because you value other's validation more. People can sense that and it can put them off because they want to get to know the real person. People-pleasers can play the character that they think others want them to be, instead of putting in the work to like and value themselves and communicate their own needs and boundaries.
Technically correct is the best kind of correct.
Speaking as someone that started with little experience, I love Adam Ragusea and Pro Home Cooks. Both explain things you never thought to ask about cooking and concepts that you can apply across lots of different dishes. I've learned things that I still continue to think about long after watching whenever I'm making up some food :)
No, it shouldn't have the same the drive letter. It's sort of similar to how your computer assigns a new drive letter to each USB drive you plug in. Drive letters aren't permanent and are based on the order they're plugged in (except C, which is usually your operating system).
Cloning is extremely easy to do on your own by the way. You can use something like Macrium Reflect Free Edition. Then you just open the program, click on the drive you want to copy, then click on the drive where you want the data to go. Just like if you were uploading files to google drive or something. Cloning just copies all of the files, drivers, operating system, other data, etc. It doesn't literally "clone" the drive (like the drive letter). Let me know if you have any questions, I'd be happy to help :)
Talklittle themself has said that it's actually because they were already working on a tildes app before the reddit API changed. Tildes was different enough from reddit that they felt comfortable investing the time. Then 3rd party apps got booted and everyone started moving over, and at that point it was easier to keep working on the same tildes app than to start anything new.
I had something similar happen a few years back. I had matched on tinder with someone from a different state that I actually met years ago in high school. I hadn't really been interested in him that way back then, but we reconnected and it was intense. We talked everyday and our birthdays both fell on the same weekend, so I went down there to visit him and celebrate together. Only a couple days in, he told me one night that he was falling in love with me. We built a pillow fort, partied, and went hiking together. I was absolutely smitten and so excited to start something new.
I ended up putting off the rest of my road trip to stay longer with him. However, when I finally did leave, I was driving through miles of desert when he texted me and said that he actually didn't see anything happening between us. He said that he wanted someone who knew when to "leave him the f alone" and wasn't looking for someone who wanted something super deep, but more so just companionship. It felt like such a rejection of who I was and I was gutted. I felt like it was somehow my fault. Since I didn't have signal, it was a rough drive alone with my thoughts.
Towards the end of the night, I ended up texting with a friend about it while I camped out (still on my road trip). It sucked at the time but looking back, he was kind of a prick. He had no shame about leading me on and he picked on me for little things while I was visiting him.
It's usually a bad sign when things feel so intense right off the bat. It's only easy for this guy to leave because he really doesn't know you well enough to know what he's missing out on. It might feel like you missed some chance, but it isn't your fault that this happened and there wasn't more you could do. Be gentle with yourself. ❤️ This guy wasn't honest with himself or with you about his feelings, and he ended up hurting you for it. It's clear to me that he likely isn't mature enough for you. Remind yourself that you were willing to go the distance, right? You did everything you could have. You want someone who will go the distance with you and follow you to the ends of the earth, and tbh, it's much more likely something to do with him, not you. Meaning that even if the distance wasn't an issue, you don't know if it would work either.
And you don't have to get over it right away. It's okay to just kind of drag through the days for a bit. But keep socializing, because other nice (and even attractive!) people will remind you that you still have something left and you're worth kindness from others. And do things for yourself. When I get lost after heartbreak, what has helped a lot is going for walks or hikes, sometimes on trails where the signal is iffy (so I don't expect a surprise text), with an audiobook or some music. I really wish you the most kindness. Feel free to shoot me a message if you need any extra support, I've been there.
Damn, talk about being on a roll!
The 2 is a purge line, meant to clear any pressure in the nozzle and wipe it off before a print. It can be edited in your Start G-code on the printer settings tab > custom g-code on prusaslicer.
The 1 is a skirt, meant to get rid of any last few hanging bits of filament and start a clean print (sometimes the purge line doesn't get everything off the nozzle). It can also be used to gauge any last minute adjustments to your z offset. If the nozzle is too close or too far, you'll know before the print actually starts. I find that the skirt can be disabled if you're using a brim, since it's redundant at that point. Some who have fine tuned printers may opt not to use one at all without much issue. It isn't meant as any kind of draft shield as another person said - that's a separate setting. It's just a failsafe for the cleanest prints possible, avoiding hanging bits of filament, blobs from built up pressure, and incorrect z height. The first layer is the most important so everything that helps the first layer helps the rest.