This comic is part of an ongoing story that might make more sense with full context.
First comic in this story
Previous comic in this story
Next comic in this story
I give my apologies for how "grainy" this one looks, it's just one.
Often when I post-process my scans, I have a lot of debris to clean up out of my scanner. This comes with the territory of pencil work - I'm putting colour pencil drawings face down on the scanner glass, so bits of loose colour and dust and junk get in there, and then show up in later images. It takes quite a bit of work to fix the image and brush out those specks - as well as fixing any other glaring issues. I tend to save a lot as I go, so I don't lose progress.
Unfortunately, for about 3 weeks around the time I made this comic, I'd screwed up the settings in my image processing program, rather than saving at highest quality, I was saving images at lowest quality, and I didn't notice. The program doesn't show the crunched image inside it, it just saves it, and windows thumbnails are small... so I just didn't see that it looked funky until weeks later when I came to upload it to my website. I could fix it by re-scanning the original and doing all the work again, but that'd take forever (and I'd have to find the original drawing in my archive.) - so we're stuck with this. It's just one of these story comics though, I'd fixed it by the next one.
Sorry again. I'm an idiot.
I see you subscribe to the concept of 'Archives are not meant to be delved into'
My archiving system is "put it all in a box then tape it up"
Dangers beyond the understanding of mere mortals lurk there
I really enjoy your artwork!
I don’t doubt that your process makes sense for your use-case. And I’m certain that you‘d have thought about alternatives, if they were viable. But your comment left me curious: Why do you prefer to use a regular document scanner for this instead of a good camera or a book scanner?
Also… as an aside, wouldn’t actually cleaning the scanner regularly be faster in the long run than digitally removing the junk afterwards?
Honestly, the debris isn't that oppressive to deal with. A lot of it isn't on the scanner glass, it's on the paper itself (smudges from my hands, lines that didn't erase fully, chunks of pencil wax that I didn't find and brush off the paper before scanning it) - so they'd appear on other capture systems. I clean the scanner regularly, it's just surprisingly hard to clean it 100%.
Given I normally need to touch up a bunch of stuff anyway (clean up text, make the white parts pure white, tweak some wonky lines, make pupils pure black) the debris isn't much of an issue, I just clean it out as I go, it's just always something I need to check for in the scan, so I'm always doing some editing when I convert my analogue media to digital for web. I think the results can look really good though.
I'm not hugely familiar with document scanners (and they've come along a long way in recent years) but in my previous experience with camera-based systems, you don't tend to get great colour accuracy from them unless you have a very expensive system. They'd also mean setting up an extra device in my cramped living space. I do have a cheap "document scanning camera" that livestreams video, and it's really nice, but the colours are always a little washed out.
Cameras have all sorts of other issues, alignment is the big one, getting your camera to be not-tilted is pretty rough, and a high quality camera for capture can be pretty expensive. The colour replication in my (modern flagship most expensive) mobile phone is surprisingly bad, and it's not possible to turn off image processing without jailbreaking the device.
On the other hand, a cheap flatbed scanner can be part of a printer combo, and it can scan with really good colour replication, It also lets me scan at 1600 DPI - which makes a HUGE high quality image. This is great for editing, you shrink it as the final step.
Thanks for the detailed response! I never worked with „fresh“ art that tends to leaves junk so this got me curious. Good book scanners do exist and I use them for reproducing historical prints from time to time, but I must admit that the one I‘m using (owned by the university) is most-likely from the upper end of the price scale.
I prefer the book scanner because it doesn’t shine through the paper that is often printed on both sides in my use-cases.
Ah yes. That's not a problem for me, because I draw on bristol board (it's 250gsm) - and I only use one side. This is a little costly (bristol board is NOT cheap, and I use a lot of it) - but the drawing surface is so superior, and it's what gives my pencil the "texture" it has.
You apologize about as much as Konsi.
It's fine, we love you.
I clean the scanner regularly, it’s just surprisingly hard to clean it 100%
The trick I think is finding a good solvent for your media.
Coloured pencil would be mostly waxes and oils.
My go-to is usually a high % isopropyl alcohol, it cleans up pretty well, dries fast (you don't want leftover solvent touching your next scan).
Next up, if it's really persistent would be odorless mineral spirits. (Odorful?) mineral spirits work too I guess, but given the choice I much pretty prefer the odorless stuff.
I very much prefer kimwipes over paper towels which usually are a bit too scratchy and can leave some fluff behind. Microfiber cloths are reusable, but once you load the fibers with waxes, it doesn't really work as well.
Do check that your scanner top is glass and not cheap plastic before using mineral spirits.
As with anything, try it out in an inconspicuous spot first to be sure.
Otherwise, isn't Scan without trace is a third level spell available to trickery domain clerics?
Isopropyl alcohol would be a pretty good move I think.
Honestly, the crunch on the colouring gives it an interesting stylization
While a higher quality would be nice, in this case I didn't notice until you mentioned it.
Really appreciate your art, it's nice to look at and so wholesome, it's a joy to think about.
I don’t know if this would work, but have you tried laminating your stuff before scanning? Or would it work if you placed your paper between laminating sheets?
That might be a little extreme. I do have some fixative spray that prevents anything dislodging from art, but... it's like £15 a can and a can doesn't cover that much (so it'd be like £1 per A4 sheet) - I use that for commission pieces, because it keeps them from fading or smudging.
What are first viewed as mistakes come to be viewed as style.
That's the feeling I get every time I hear an immigrant talk crap about immigrants.
Or white Americans about immigrants... They're there because of fairly recent immigrants, don't they know that?
It's the same mindset with a lot of these people when they go to a different country. I have seriously heard tourists complaining about "all these foreigners" in the country they are visiting. They think, "immigrant" and "foreigner" denotes the others, and not them.
There's a monster at the end of this book.
There's a mirror glued into the back page.
Okay that's cruel... It didn't have to be that hideous
You would think a half-orc would 'get it' more readily... Apparently not.
Maybe she grew up in an abbey or something else like that and never encountered it.
Razira just like... doesn't really think about people in terms of labels or identity - she's very straightforward. Either someone is doing something bad and needs beating up, or someone is a friend and needs protecting or helping. While she would be aware that "goblins tend to get beaten up by adventurers" the moment Konsi becomes a friend, Razira would just completely forget that, because why would you beat up Konsi? Konsi is a friend.
This is one of the most adorable DnD comics I have ever seen I love it.
Great work on this series so far! Thanks for making these :)
Humor, jokes, memes about TTRPGs