2

The plug side that goes into the PSU is not standard.

The PSU is an EVGA 1600 G2 supernova.

How do I plug this in? I can't find a compatible cable or plug adapter.

top 21 comments
sorted by: hot top controversial new old
[-] cablepick@lemmy.cablepick.net 5 points 1 year ago

From google images it looks like this PSU has an IEC C20 male connector on it meaning you would need an IEC C19 end on your cable. C19/20 is a higher amperage version of C13/14 which is what could be considered standard on a normal consumer PSU. Google C19 to whatever plug your 220v outlet needs and you should find the appropriate cable.

[-] average650@lemmy.world 1 points 1 year ago

Okay! Thank you. I think that should be what I need.

[-] average650@lemmy.world 1 points 1 year ago

But the way, do you have a resource for the names of different plugs/connectors?

[-] notfromhere@lemmy.one 2 points 1 year ago

There should be a switch that flips the input between 110/220 and you will need a different cable for the PSU

[-] ptz@dubvee.org 2 points 1 year ago

Will that work for US split-phase "220" where the voltage is 110v on each leg? I was always worried that would fry the PSU since it's not true 220V.

[-] Max_P@lemmy.max-p.me 4 points 1 year ago* (last edited 1 year ago)

It's functionally the same, it's not fake in any way.

It's just a transformer that has 240V across it with a tap in the middle, and we take the two halves of it to make the two 120V lines. Combining the two 120V is really just using the whole transformer.

You'd see exactly the same curve on an oscilloscope.

It's not? I guess it's more like 230-240 but it should be fine,

[-] colebrodine@midwest.social 1 points 1 year ago

"220 V" is the "nominal" voltage. All voltages fluctuate depending on all sorts of factors, but should stay within a certain range of nominal. In the USA most utilities follow the ANSI C84 Voltage standard. 220 V is what electricians refer to it as. Your utility probably calls it "240 V".

[-] average650@lemmy.world 1 points 1 year ago

Right, where do I find the cable? I can't find it on evgas website or anywhere else.

[-] notfromhere@lemmy.one 2 points 1 year ago

Can you upload a picture of the plug because it should be easy to find standard cables?

[-] average650@lemmy.world 2 points 1 year ago

Someone else has given me what I need I think ,but it looks like the one here:. https://www.evga.com/products/product.aspx?pn=220-T2-1600-X1#images-4

That's the titanium model, while I have the cheaper gold on, but I think the plug is the same.

[-] notfromhere@lemmy.one 1 points 1 year ago

Sorry I meant your power outlet. The outlet on the PSU is standard for 220v from what I know

[-] average650@lemmy.world 1 points 1 year ago
[-] average650@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

It looks like I need a 6-15P to IEC C19 cable. I guess 14 gauge should be sufficient.

Edit: Wait...It might be 6-30... That's way harder to find.

[-] notfromhere@lemmy.one 1 points 1 year ago

Yea I can’t help you there. That NEMA 6-30P is going to be tough to utilize for this and could be dangerous. Good luck on your hunt. My only suggestion is maybe fine a PDU that could go between. I do not recommend making your own cable.

[-] average650@lemmy.world 1 points 1 year ago

Could I not use a 6-30P to 6-15R adapter? My computer will blow up before that amperage becomes and issue.

[-] notfromhere@lemmy.one 2 points 1 year ago

I’m not an electrician. I would assume one adapter in the line would probably be fine if it’s a good quality adapter and no chance of coming loose. I would be worried about shorting / fires and would want an adequate breaker behind it, maybe arcflash.

[-] colebrodine@midwest.social 1 points 1 year ago

You can get someone knowledgeable like an electrician to just change the outlet itself to whatever is best.

load more comments
view more: next ›
this post was submitted on 20 Jul 2023
2 points (58.3% liked)

Selfhosted

39677 readers
373 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS