-4

Fan drivers for a Windows laptop (programming.dev)

submitted 1 year ago* (last edited 1 year ago) by kreateer@programming.dev to c/linux@lemmy.ml

8 comments fedilink hide all child comments

Tldr: Are there fan drivers I should look into for my Gigabyte Aorus XC laptop (Intel i7; RTX 3070; 32GB RAM), so my fans do not get stuck at 100% when running Linux? I installed Mint 2 yrs ago when this happened. Im aware I cant tell for sure without doing another live boot, but I'd like to prepared just in case.

EDIT: I tried solving this before with acpi fan module also to no avail. I checked lm-sensors scripts for my device before posting this today and there were none still. I also googled for solutions beforehand and did not find anything relevant for my device. Furthermore, when I did a live boot before, the fans were working normally, but on installing either Mint or Ubuntu the fans were maxed out. If I have to install to test things out, then there's not much point to a live boot for this in the first place.

top 6 comments

sorted by: hot top controversial new old

[-] Eideen@lemmy.world 4 points 1 year ago

Your previous post did register, be patient.

[-] dark_stang@beehaw.org 4 points 1 year ago

Have you used the fancontrol script from lm-sensors yet?

[-] kreateer@programming.dev 1 points 1 year ago

I tried that before and it did not work, however I guess its worth a shot again. Can I install it in live boot?

[-] dark_stang@beehaw.org 2 points 1 year ago

I've never tried to do that but probably. It might require you to have a recent kernel and Nvidia drivers installed.

[-] nyan@lemmy.cafe 3 points 1 year ago* (last edited 1 year ago)

A bit of fishing around turns this up: https://gist.github.com/bakman2/e801f342aaa7cade62d7bd54fd3eabd8 If the sensor/fan controller chip in your laptop is indeed one of the it87 models, you will need either the out-of-tree kernel module recommended on that page, or maybe just a quite recent kernel—the it87 chip on my mobo (completely different model from a completely different manufacturer, though) is supported in-tree as of kernel 6.1. I was using the out-of-tree module during 2018-2022, and it was touchy and required a boot param to allow it to load despite an ACPI conflict (that might have been fixed, though.)

[-] Rustmilian@lemmy.world 2 points 1 year ago

Maybe this.

load more comments

this post was submitted on 09 Aug 2023

-4 points (35.7% liked)

Linux

48236 readers

1182 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

AgreeableLandscape@lemmy.ml

nooter692@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz