You might try ZeroTier. You'll each need a tiny client app, but its super easy to install and setup, and extremely secure. Free to use with up to 25 devices.
Can confirm, very easy to setup clients. And since its not a VPN but a VLAN, you wont run into problems connecting between different clients.
This is pretty much open-source Hamachi.
For non tech savy people, is ZeroTier easier to config than Tailscale? I tried Tailscale and everyone needs a account before start playing, which can be a fraction.
Im not sure how difficult it is to setup a Tailscale client, honestly.
The Zerotier setup is just installing and joining a network by an id. The Windows version has a bit of a GUI, where you have to right-click on a status bar icon, click Join network, paste in the id and join. The Linux version of the client has a cli, which is imho even better, as you can just send them a whole command to copy into the terminal.
I admin a Zerotier network for a bunch of kids that wanna play Minecraft, and they havent had many problems setting up.
There is a bunch of information on self-hosting the whole system, but Ive honestly never tried any of that. It was just nice that this was "just the open-source LogMeIn Hamachi with a superior implementation of everything".
Proprietary solution, no thanks
Most VPNs use UDP. So set up a wireguard, tailscale or openvpn.
But you still need to "open up the firewall". UDP still works on ports the same way as TCP. I do agree however, that exposing a VPN port is more secure than exposing a port for a game server, as you don't know about the security of that server software.
Does that require my friends install & configure Tailscale/WG/OpenVPN? I tried that route like 2~3 yrs ago with OpenVPN and it doesn't works well.
I would like to keep it as simple and easy as it can be. Aka no need extra software and config. Just fireup the game, connect, and play, as if the server is hosted on some VPS.
At some point, you have to compromise.
Tailscale [...] install the client, have the users sign in, and then add them to your tailnet
You can just have them pass you the device enrollment links and add their devices to your tailnet. That way nobody else has to make an account.
Just fireup the game, connect, and play, as if the server is hosted on some VPS.
The best you can do without clients for the users is to set up a VPS and have your server VPN into it so the VPS can expose the game port through the VPN.
Other than that there's no escaping either clients for everyone, or open ports on your router. Something somewhere has to be accepting incoming connections.
I don't think you need to open any ports for a mesh network to transmit UDP packets. It's a full virtual network.
If you want any system to connect to you, you need to open a port. You don't need to do that for outgoing connections (the OS and your router will automatically open ports for the return connection). So if everybody connects to one central system, nobody needs to (explicitly) open any ports (except for the central connection point)
Thats one of the neat features of tailscale and zerotier, they can set it up so both ends are “outgoing” to the NAT so no port forwarding is needed
Wireguard/Tailscale? (I'm not sure how well they do with latency).
Isn't tailscale serve only do tcp?
You shouldn't need serve or Funnel if your friends run the client and join your network.
Best part, they can choose to only run the client when they want to game.
That said, I notice a little lag when using RDP over it on the local net (while testing). Though that may be a round-Robin issue.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
| Fewer Letters | More Letters |
|---|---|
| CGNAT | Carrier-Grade NAT |
| IP | Internet Protocol |
| NAT | Network Address Translation |
| SSH | Secure Shell for remote terminal access |
| TCP | Transmission Control Protocol, most often over IP |
| UDP | User Datagram Protocol, for real-time communications |
| VPN | Virtual Private Network |
| VPS | Virtual Private Server (opposed to shared hosting) |
8 acronyms in this thread; the most compressed thread commented on today has 5 acronyms.
[Thread #669 for this sub, first seen 9th Apr 2024, 16:35] [FAQ] [Full list] [Contact] [Source code]
Tailscale/headscale are always recommended and they are good options but I want to recommend netbird as an alternative. This is what I have currently setup and it's fantastic.
Can’t recommend tailscale enough, it is much easier to set up than ZeroTier and has much more intuitive access control (so you could make it so your friends can only see the server and not each other for example)
Tailscale and Netbird are what you are looking for. I highly recommend Netbird as it is much more user friendly. Just keep in mind it forwards all ports by default. You can change that in the access policies
i2p also can do it if you need privacy
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
Any issues on the community? Report it using the report flag.
Questions? DM the mods!