34

Dear lemmings,

I am fairly new to the server-game and want to set up my first NAS. I will not only be doing a lot of reading but also quite a lot of writing as well so I guess RAID10 (even though hardware/money intensive) would be a good choice? Or should I rather go for RAID 0 with 3 2 1 backup strategy? Currently I am hosting some websites others use as well so uptime is an issue.

Now I am not sure what brand/model to buy, when reading up on it they all sound decent. I have an old PC that I can use to run the drives so I only really need to buy the drives for now. Currently I am looking at drives with a capacity of around 14TB if that is of any importance.

Many thanks in advance :D

all 19 comments
sorted by: hot top controversial new old
[-] AbidanYre@lemmy.world 20 points 5 months ago
[-] scrubbles@poptalk.scrubbles.tech 11 points 5 months ago

WD Red has always been my go-to, and in the last 8 years of homelabbing I haven't had a single one fail. Blues and Greens are not build for NAS operations, and you'll see them fail. Toshibas I haven't had a single one make it past a year, except for their gaming drives.

If you want the shortcut, the WD Elements usually go on sale at Best Buy regularly, and they're always a WD Red or White, which will also work. All of my drives have been one of those. You just shuck the internal drive out of the enclosure

[-] JustEnoughDucks@feddit.nl 7 points 5 months ago

Definitely Red plus. They are quiet as hell and 12TB+ are helium filled.

Just got a 12TB a while ago and it is as quiet as my 4TB drives.

But for OP, just use software raid instead of hardware raid. There is very little point for homelabbers using hardware raid at this point without an existing setup.

[-] blackstrat@lemmy.fwgx.uk 1 points 5 months ago

Don't use Red drives for a NAS!! You need the Red Plus (or is it red pro) disks as they're CMR.

I'd go for Ultrastar drives personally. There's a few really good videos online analyzing the backblaze stats for different drives that are well worth watching.

[-] scrubbles@poptalk.scrubbles.tech 3 points 5 months ago

Red 8TB+ are CMR, OP said they're using 14TB drives, they're fine

[-] MalReynolds@slrpnk.net 9 points 5 months ago

To a large degree, the point of RAID is to not care about drive reliability, trust the process. Also, you seem to conflate RAID with backup ("RAID is not a backup"), you want both. In a NAS, you're probably better off with RAID5 + backup.

In a system that can take a drive failure, the current datahoarder zeitgeist is Manufacturer Recertified (Enterprise) Drives, see ServerPartDeals.com if you're a yank, other countries have their own options.

[-] blackstrat@lemmy.fwgx.uk 7 points 5 months ago

RAID IS NOT BACKUP RAID IS NOT BACKUP RAID IS NOT BACKUP

[-] Fiivemacs@lemmy.ca 5 points 5 months ago

You just want some models, or do you have a price point that you shouldn't exceed? I always stick with Western digital for the most part, but again how much money you got will depend on the tier of drive.

[-] smokinliver@sopuli.xyz 5 points 5 months ago

I can afford enterprise-grade drives. It is rather that I have little to no clue about the reliability and failure-rates of different manufacturers/models.

And how different are these from consumer-grade ones? Is it cheaper to buy expensive drives once instead of multiple cheap ones one after another or do the quality differences not matter that much at all?

[-] catloaf@lemm.ee 3 points 5 months ago

If you can get cheap ones for cheap, then get a bunch of cheap ones and just replace them when they fail. As long as you're not abusing them, they'll last plenty long.

Also, keep regular backups in case something catastrophic happens. RAID won't save you if something corrupts the whole array.

[-] BCsven@lemmy.ca 5 points 5 months ago

This is a very good article about server setup mainly for power consumption, but shows quirks like power level draw based on what pcie slots are used, etc. This guy servers. https://mattgadient.com/7-watts-idle-on-intel-12th-13th-gen-the-foundation-for-building-a-low-power-server-nas/

[-] carzian@lemmy.ml 5 points 5 months ago* (last edited 5 months ago)

I've always liked the ultrastar line. Used to be made by HGST and then WD bought them. I'm using specifically the HC530 14tb. The line has a long history of being very reliable enterprise drives.

I've bought mine from both goharddrive and serverpartsdeals. Both are reliable resellers of used storage. They'll warranty the drives for 2 or 5 years depending on which you to with. Prices are ~$130-$150.

Be aware you might need to do the electrical tape over some of the power pins hacks depending on your setup.

Ps. One of the listings for the HC530 on goharddrive or serverpartdeals is incorrectly labels as HC520. Just pay close attention.


As far as raid goes, Raid 10 is currently very popular for its speed and drive failure tolerance. Remember, raid is not a replacement for the 3-2-1 backup rule. Raid has some fault tolerances for bad hard drives, but doesn't protect against a failed raid card, fire, flood, robber, acts of god, etc.

You can also look into zfs and truenas if you feel inclined. Be aware that if you go with this setup, ecc ram is basically a requirement

[-] MonkderDritte@feddit.de 0 points 5 months ago

What, a HDD that doesn't work in some computers?

[-] carzian@lemmy.ml 4 points 5 months ago

"The cause is a new SATA specification which includes the ability to disable power to the hard disk. When you look at the SATA power connection on the back of your hard drive, there are 15 pins that make contact with your power supply. It's the third pin that delivers a 3.3V signal that disables the drive. What we need to do is prevent that third pin from making contact with the power cable."

Some hotswap harddrive bays use this feature, definitely more common in enterprise scenarios or in USB HDD enclosures.

[-] TwiddleTwaddle@lemmy.blahaj.zone 4 points 5 months ago

I'm planning on getting some recertified Seagate Ironwolfs from SeverPartDeals very soon

[-] possiblylinux127@lemmy.zip 2 points 5 months ago* (last edited 5 months ago)

If uptime is an issue do not go for raid 0.

How much data are we talking? At what speed do you want it to run? Raid 10 is probably a bad idea regardless.

https://calomel.org/zfs_raid_speed_capacity.html

[-] Decronym@lemmy.decronym.xyz 1 points 5 months ago

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters More Letters
NAS Network-Attached Storage
RAID Redundant Array of Independent Disks for mass storage
SATA Serial AT Attachment interface for mass storage

[Thread #820 for this sub, first seen 20th Jun 2024, 21:45] [FAQ] [Full list] [Contact] [Source code]

[-] deFrisselle@lemmy.sdf.org -4 points 5 months ago

There is no such thing as a Backup, only Redundant copies

this post was submitted on 19 Jun 2024
34 points (92.5% liked)

Selfhosted

40359 readers
349 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS