16
submitted 2 years ago by adonis@kbin.social to c/linux@lemmy.ml

I have had a Logitech G903 for almost 3 years now, and it worked great under Linux. It had smooth scroll properly working with solaar and I could remap/deactivate buttons with piper.

Now that the G903 seems like it's going to die (random slowdowns), I'm in the market for a new mouse.

I got a Razer Balistik v3 pro, only to find out that Razer support on Linux is terrible.

So I got the G502 X Plus, hoping it would work like the G903 did, but has a bunch of issues.

For exampe: It's not recognized by piper, so I cannot remap/disable buttons. While I can change the dpi with solaar, it only stays until I press the thumb-dpi-button, then it switches to a higher dpi and stays there. (had to enable in-memory profile on a windows vm with ghub, to make solaar work) ... and many more.

Are there any good wireless mice out there, that have good Linux support?

top 36 comments
sorted by: hot top controversial new old
[-] bloopernova@programming.dev 14 points 2 years ago

Ploopy.

Open source QMK firmware, 3D printed with STL files available. Loads of buttons. It's by far the best mouse I've ever used.

https://ploopy.co/mouse/

[-] adonis@kbin.social 4 points 2 years ago

cool... didn't know about this one... but considering my 3d skills, the scroll wheel would get stuck and the buttons would fall apart 😅

[-] Kata1yst@kbin.social 5 points 2 years ago

You can buy the kit with everything printed and self assemble, or you can buy it fully assembled.

[-] Nuuskis9@feddit.nl 4 points 2 years ago

Darn how cool it is and I almost ordered it. Too bad it isn't wireless using 1850 cells.

[-] drdiddlybadger@pawb.social 1 points 2 years ago

Well I just found my next purchase.

[-] spclagntdanazoe@possumpat.io 1 points 2 years ago

This is awesome!

[-] s_s@lemmy.one 12 points 2 years ago* (last edited 2 years ago)

Zowie (BenQ) gaming mice all have hardware toggles for report rate and dpi on the bottom of the mice, if that suits you.

[-] Fryboyter@discuss.tchncs.de 6 points 2 years ago

That would be my recommendation as well. I've been using a Zowie mouse on Linux for years now.

However, the switches with which you can make the changes are at the bottom of the mouse. Changing the DPI, for example, with one click is therefore not possible. For some users, this is apparently a problem, for whatever reason.

[-] bellsDoSing@lemm.ee 2 points 2 years ago

Have been using a Zowie FK2 for a couple years now and it's really nice. No drivers needed due to being USB class complient. Hardware toggle for DPI. Good build quality. If it would break tomorrow, I'd buy it again if available.

[-] maniac@lemmy.world 7 points 2 years ago

Every mouse should be fine. It's just the ones with software might not be configurable.

[-] Molecular0079@lemmy.world 3 points 2 years ago

Could be configurable if you pass through the device to a Windows VM. Far from an ideal experience but its doable.

[-] Kerb@discuss.tchncs.de 2 points 2 years ago

afaik that should work,

running the software in wine/lutris could be an simpler solution

[-] Molecular0079@lemmy.world 5 points 2 years ago

I've never had much success with wine when it comes to hardware access or anything driver related, but I could be wrong in OP's case.

[-] maniac@lemmy.world 1 points 2 years ago

Yeah it's possible but the solution seems less ideal. Luckily I don't thing changing settings on a mouse is a common thing.

[-] plebeian_@lemmy.ml 5 points 2 years ago

I have an older g502 and while the software is windows specific (maybe there is a mac version too?), the actual settings are saved on the firmware. So connecting it once to windows and configuring it should suffice. Just an idea since you already spent the money…

[-] LiveLM@lemmy.zip 2 points 2 years ago

I have a G502 and the Logitech Software isn't even necessary, it works perfectly with Piper.

[-] adonis@kbin.social 1 points 2 years ago

but I got the g502 x plus, which came out last year. my current g903 works with piper too.

[-] Fubarberry@lemmy.fmhy.ml 1 points 2 years ago

This is the what I did. My wife still uses windows so I configured the mouse on her computer, saved the configuration, and have it working smoothly on my PC.

While it was easy to set it up this way, I really don't like the idea of needing windows to configure my mouse though. I really wish logitech would start offering official Linux support.

[-] usernotfound@lemmy.ml 0 points 2 years ago

I still have a ~10 year old Logitech G500 that has finally started to go bad. I've been looking around, and it seems that Logitech's quality has been going down the drain - apparently sometimes clicks get registered as double clicks on recent models?

Can you (or anyone else who has one) comment on their experience with that?

[-] ExtraMedicated@lemmy.world 0 points 2 years ago

I had a G500 for several years as well as a G5 before that. They worked great for years, but the G5 started to randomly slow down or disconnect/reconnect, and the G500 had that double-click issue you mentioned. I didn't get another logitech after reading some reviews that mentioned the same issues.

[-] usernotfound@lemmy.ml 0 points 2 years ago

That's promising :/ I really like the shape of that mouse, and the custom weights. What did you end up buying instead?

[-] ExtraMedicated@lemmy.world 1 points 2 years ago

I went with a Zelotes C-12. I don't like it quite as much as I did the others, but it's okay and has a lot of buttons. The scroll wheel did break once, but I was able to fix it.

[-] priapus@sh.itjust.works 4 points 2 years ago

Buy any that don't require software to configure. Zowie and VAXes are good options. I like Ninjutso too.

[-] pelotron@midwest.social 2 points 2 years ago

It's not exactly a gaming mouse, but I recently got a Glorious Model O and it works just fine on Linux, wired or wireless. OpenRGB works with it too. The mouse itself is lightweight, comfortable, and accurate, which is all I need. I thought I would miss having a bunch of thumb buttons (this one has two) but I don't.

[-] adonis@kbin.social 1 points 2 years ago

actually, this one looks pretty cool. I too don't use more than two thumb buttons, which is enough.

How's the scroll wheel?

[-] pelotron@midwest.social 1 points 2 years ago

The scroll wheel is fine, but honestly the one feature I do miss from my old Logitech was a button I could click that put the scroll wheel into free wheel mode where it would spin instead of ratcheting. If Glorious made a mouse with that I would probably buy it tomorrow

[-] adonis@kbin.social 1 points 2 years ago

oh no, that's a bummer. I really need that free spin

[-] Synthead@lemmy.world 1 points 2 years ago

I have the same mouse and the scroll wheel is the best I've used on a mouse. The wheel is nice and jaggy, and the movement has no slop whatsoever.

[-] aport@programming.dev 1 points 2 years ago

Wireless Glorious Model D checking in. Awesome mouse.

[-] lemminer@lemmy.ml 2 points 2 years ago

I got a five year old g502. I have no issues on linux or piper. I more willing to use piper than LGS to configure the mouse.

[-] deong@lemmy.world 1 points 2 years ago

If you’re on Wayland, you’re probably on your own, but Xorg almost certainly can support anything except stuff like RGB lighting and DPI switching and that sort of thing. "Normal" mouse buttons should just be generating events that you can see with xev, and then remap them with xkbcomp or xmodmap.

I use a Razer Naga Trinity with the MMO buttons on the side, and I configure it exactly how I want with a script that calls xkbcomp when my window manager starts.

[-] poVoq@slrpnk.net 0 points 2 years ago

My impression was that with this: https://github.com/openrazer/openrazer Razer support on Linux is quite good?

[-] Eeyore_Syndrome@sh.itjust.works 1 points 2 years ago* (last edited 2 years ago)

Not for Mice.....but if looking at controllers or joysticks:

Checkout this nifty list of udev rules:

Supported Devices

ReadME/Installation:

When one installs their package manager version of steam, steam-devices usually takes care of controllers for the system.

But if say, you are on immutable like Silverblue or Kinoite and use the Steam Flatpak, then udev rules are not included by steam.

[-] danileonis@lemmy.ml 0 points 2 years ago

I think every brand not hardly using proprietary config software should be preferable, Logitech seems good.

[-] str82L@kbin.social 0 points 2 years ago

Also, Logitech makes the only Linux compatible bluetooth mouse (that I'm aware of) that supports dual booting with Windows - the
Logitech M720 Triathlon. My other Logitech Bluetooth mouse works fine in each OS individually but has to be re-paired after each OS switch :/

[-] HeinousTugboat@kbin.social 1 points 2 years ago

The MX Ergo has two bluetooth profiles stored on it, so you can switch seamlessly between any two devices. I use one of mine with both a Windows desktop and an MBP.

this post was submitted on 11 Jul 2023
16 points (90.0% liked)

Linux

56044 readers
1724 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 6 years ago
MODERATORS