1020
submitted 1 year ago* (last edited 1 year ago) by RanchOnPancakes@lemmy.world to c/asklemmy@lemmy.world

I bought a piece of 1.5 inch stiff foam to try to fix a sag in a bed. It didn't work but having that thick piece of solid foam around has been a life saver.

Need something flat to put a laptop on? Throw it on the foam. Going to be doing something that requires you to be on your knees for a while? Get the foam!

It went from stupid purchase to something I'd gladly replace if it broke.

you are viewing a single comment's thread
view the rest of the comments
[-] Piers@lemmy.world 2 points 1 year ago

I've actually been considering this recently. Are you able to give me any suggestions or tips for what to look for?

[-] ICKSharpshot68@lemmy.world 3 points 1 year ago

What sizes are your monitors? Personally I think gas springs are the best, as any good one will allow you to adjust height and position with relative ease. Biggest thing you really have to watch for is the weight of your monitor vs the capacity of the stand, but if you're not dealing with huge monitors you likely won't run into this.

[-] Piers@lemmy.world 2 points 1 year ago

They're like two random bedroom style (ie, intergrated DVD players that don't work) flatscreen TVs so I think I would need relatively strong mounts. The smaller one is a 19 inch. I guess the other is a 22 but I'm not sure or able to check right at this moment. I guess monitors get so much bigger than that now that maybe these sets aren't actually that heavy in comparison?

[-] ICKSharpshot68@lemmy.world 1 points 1 year ago

Honestly, I don't think you'd have any concerns with finding some that are suitable, those are the sizes of monitor that the overwhelming majority of the stands are made for. Monitors get absurdly large now.

[-] Sharkwellington@lemmy.one 1 points 1 year ago

Check if your monitor is VESA compatible and buy a monitor with that brack if it is. Don't cheap out, you'll want to spend at least $100 for quality arms IMO.

Also, make sure your table is strong enough that it won't warp - you're going to be putting a lot of weight in a small area. It ended up warping my IKEA desk but I didn't mind since I got it second-hand. You can put a block of wood between the clamp and the table to distribute the stress and keep the clamp from leaving a mark as well.

this post was submitted on 12 Jul 2023
1020 points (99.0% liked)

Ask Lemmy

26969 readers
486 users here now

A Fediverse community for open-ended, thought provoking questions

Please don't post about US Politics. If you need to do this, try !politicaldiscussion@lemmy.world


Rules: (interactive)


1) Be nice and; have funDoxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them


2) All posts must end with a '?'This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?


3) No spamPlease do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.


4) NSFW is okay, within reasonJust remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com. NSFW comments should be restricted to posts tagged [NSFW].


5) This is not a support community.
It is not a place for 'how do I?', type questions. If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.


Reminder: The terms of service apply here too.

Partnered Communities:

Tech Support

No Stupid Questions

You Should Know

Reddit

Jokes

Ask Ouija


Logo design credit goes to: tubbadu


founded 1 year ago
MODERATORS