51

what width/depth should a good moat have?

you are viewing a single comment's thread
view the rest of the comments
[-] EmmaGoldman@hexbear.net 2 points 9 months ago

That depends, are we talking about a dry moat or a water castle moat?

For any moat, the total height from the top of the wall to the bottom of the most should be enough that the enemy cannot use a ladder to climb over the wall. This was easier to achieve before you could walk into a hardware store and come back with a 40' ladder.

The most itself must be deep enough that your attackers cannot simply walk across it if it is a water moat, and any moat should have difficult terrain at the bottom, concrete tetrapods are great. Just make sure the highest point of the terrain is still deeper than a person could stand in.

The width of the moat should be at least 1:1 with the height of the walls above the waterline, and the wall should extend smoothly from the top to the bottom of the moat, with nothing that could be used as a hand or foot hold.

this post was submitted on 15 Dec 2023
51 points (100.0% liked)

chapotraphouse

13446 readers
747 users here now

Banned? DM Wmill to appeal.

No anti-nautilism posts. See: Eco-fascism Primer

Vaush posts go in the_dunk_tank

Dunk posts in general go in the_dunk_tank, not here

Don't post low-hanging fruit here after it gets removed from the_dunk_tank

founded 3 years ago
MODERATORS