67
submitted 1 year ago* (last edited 1 year ago) by Braintrain@lemmy.ml to c/asklemmy@lemmy.ml

Hi, I got a used laptop from an family member. It did have this this annoying sticker on it (see picture). Apparently for years already.

So, how can I remove it without scratching the metal body or leaving residue behind?

Edit: Having some problems with picture upload, but here's a similar photo for reference: https://i.ytimg.com/vi/jDV7-ehqF38/maxresdefault.jpg

top 38 comments
sorted by: hot top controversial new old
[-] fireweed@lemmy.world 37 points 1 year ago

You don't need a specialized product (like Goo Gone several comments mention) to remove sticky residue. Any kind of cooking oil will do. I usually use a small dab of whatever is on hand (which in my house is olive oil, but avocado, canola, corn, etc would also be fine). Start with a very small amount, like one drop: a little can go a long way and it can be a huge mess if you overestimate how much you need. Rub it in with your finger and the gunk should come right up. Paper towel the rest off. Repeat if necessary. Extra bad spots might require a touch of gentle fingernail action.

[-] ColeSloth@discuss.tchncs.de 21 points 1 year ago* (last edited 1 year ago)

Hand sanitizer works better, actually.

Also: OP; How dare you remove those stickers!

[-] intensely_human@lemm.ee 1 points 1 year ago
[-] ColeSloth@discuss.tchncs.de 1 points 1 year ago

It does, but because it evaporates so quickly, hand sanitizer normally works better.

[-] IsoKiero@sopuli.xyz 4 points 1 year ago

Almost any kind of grease will work. Moisturising cream, oil, butter, engine oil and so on. It'll soften the glue and whatever residue your chemical leaves behind can be wiped off with hand sanitizer or a drop of soap. The trick, as you mention, is to use way less than what you think you'll need to avoid mess.

[-] fireweed@lemmy.world 3 points 1 year ago

Yup any oil works in my experience but I've found cooking oil to be the least messy, hence that specific suggestion. But in a pinch any kind of greasy substance will do.

[-] ArcaneSlime@lemmy.dbzer0.com 2 points 1 year ago

Baby oil works wonders too, but if it's safe to do so I usually just crack into a bottle of 91%+ isopropyl.

[-] EuroNutellaMan@lemmy.world 25 points 1 year ago

15 sticks of dynamite should do the trick

[-] scrubbles@poptalk.scrubbles.tech 17 points 1 year ago

I think you forgot to add the picture :(

But, I assume it's one of those super annoying ones. I'd say carefully peel all you can, then Goo Gone is your friend :)

[-] tryitout@infosec.pub 9 points 1 year ago

The only thing I would add to this is carefully use a hair dryer to loosen the adhesive on the sticker first. Should leave less mess for the goo gone to deal with.

[-] redeyejedi@lemmy.world 6 points 1 year ago

Test a small area of the laptop that you can't see to make sure the Goo Gone doesn't haze or discolor the plastic.

[-] Lettuceeatlettuce@lemmy.ml 4 points 1 year ago

I've heard the same, Goo Gone is magic.

[-] Pantherina@feddit.de 2 points 1 year ago

Sounds like overpriced alcohol to me ;D

[-] intensely_human@lemm.ee 2 points 1 year ago

Just a Goo Gone and coke please.

That’ll be $23

[-] Pantherina@feddit.de 1 points 1 year ago

Dont tell that the Tiktok kids!

Does goo gone expire or something? I've had a bottle for years and it's useless.

[-] steersman2484@sh.itjust.works 11 points 1 year ago

I always use 99% Isopropyl alcohol for stuff like this

[-] Sir_Kevin@lemmy.dbzer0.com 2 points 1 year ago

Same. Maybe hit it with a heat gun first to help the sticker peel off.

[-] pr06lefs@lemmy.ml 10 points 1 year ago

I'd just peel it off and maybe rub it with my finger to get rid of leftover adhesive.

[-] HejMedDig@feddit.dk 9 points 1 year ago

I just use my nails to get it off, and most of the time, I manage to get most of the glue off by reapplying the sticker and peel it off again a few times

[-] foggy@lemmy.world 9 points 1 year ago

Heat. Not a lot. But heat. Line a blow dryer.

Then an exacto knife to separate the adhesive from the plastic/metal.

Then googone to clean.

Then alcohol wipes to finish.

[-] NarrativeBear@lemmy.world 3 points 1 year ago

I find wd40 also works well for removing grease or sticker residue

[-] ThoGot@lemm.ee 2 points 1 year ago

I find wd40 also works well for removing grease

That's what it's made for after all

[-] Zikeji@programming.dev 3 points 1 year ago

A heat gun is also inexpensive and very useful. 3M mount you need to remove (and/or reuse)? Heat gun. Sticker? Heat gun. Frazzled threads on clothes? Heat gun. No time to properly blow dry? Heat gun! (the last one is a joke, don't do that).

[-] intensely_human@lemm.ee 2 points 1 year ago

Also the most satisfying thing is putting plastic over windows to winterize and erasing all the wrinkles with the heat gun.

[-] TurboHarbinger@feddit.cl 3 points 1 year ago

Careful tho, I've seen melted keyboards thanks to a blow dryer.

[-] backhdlp@lemmy.blahaj.zone 5 points 1 year ago

I just rub the residue with my thumb until it's gone, worked perfectly for me

[-] sanguinepar@lemmy.world 6 points 1 year ago

Sure, but now you're down a thumb, so...

[-] TheGalacticVoid@lemm.ee 5 points 1 year ago

Removing those is a war crime.

[-] neumast@lemmy.world 5 points 1 year ago

They get eliminated at first sight!

[-] Extrasvhx9he@lemmy.today 4 points 1 year ago

Goo gone and a plastic scraper might work

[-] olosta@lemmy.world 3 points 1 year ago

Remove the sticker, and remove the leftover glue with an eraser.

[-] Teknikal@lemm.ee 3 points 1 year ago* (last edited 1 year ago)

I'd use ipa to break down the glue or at a pinch some hand sanitiser and a cloth to get rid of stickers.

[-] peto@lemm.ee 2 points 1 year ago* (last edited 1 year ago)

A plastic ice scraper will help get the bulk off, then you can get a variety of solvents for removing any residue. If it is metal then it should be fine with most solvents but check the instructions and do a test patch somewhere discreet to be sure.

[-] Fondots@lemmy.world 2 points 1 year ago* (last edited 1 year ago)

If you're careful and can't just get it off with your fingernails, a razor blade is young best friend for scraping off stickers, if you're less careful they sell plastic razor blades for scraping stuff that also work pretty well.

For residue, goo gone, cooking oil, isopropyl alcohol, lighter fluid, or just some soap and water if you're careful. Or just let the residue wear off on its own if you're lazy.

[-] Maddie@sh.itjust.works 1 points 1 year ago

A little bit of lighter fluid on a paper towel works great for getting sticker residue off easily!

[-] WorkIsSlow@lemmy.world 3 points 1 year ago

A lot of lighter fluid and a lighter works great too!

Goodbye stickers!... and house...

[-] Maddie@sh.itjust.works 2 points 1 year ago

Haha yeah that's one way of doing it for sure!

this post was submitted on 13 Nov 2023
67 points (97.2% liked)

Asklemmy

43859 readers
1675 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS