1304
submitted 1 year ago by Zastyion345@lemmy.ml to c/memes@lemmy.ml

spoilerFor people that don't know this is not how you use Calipers

top 50 comments
sorted by: hot top controversial new old
[-] PeutMieuxFaire@kbin.social 113 points 1 year ago

Wow! That's a creative way to use a caliper.
That's why teaching children about metrology basics is so important.

[-] CADmonkey@lemmy.world 91 points 1 year ago

I remember when I first applied for a job in a fabrication/machine shop. One of the questions in the interview was "Do you know how to read a tape measure‽" followed by "demonstrate that you can use a tape measure" along with some other fun ones like "what is the difference between these two pieces of material" (one was aluminum, the other stainless) and other such things. I remember being surprised/disappointed that there were grown people who couldn't read a tape measure.

I've worked in machine shops and drafting offices for years now, and I'm no longer surprised by people who can't use basic measuring tools. Still disappointed though.

[-] Noughmad@programming.dev 33 points 1 year ago

There's a great test for programmers called FizzBuzz. It's an extremely easy task - print some numbers (maybe 1 to 100), but replace them with Fizz if they're divisible by 3, by Buzz if they're divisible by 5, or by FizzBuzz if they're both.

Many reasonable people consider it way too easy - if you can write this, it doesn't mean that you can write complex programs, or that you know the applicable languages, or that you know anything about the business domain.

But interviewers know that it's a great test because a lot of so-called programmers still fail it.

[-] foo@programming.dev 32 points 1 year ago

We did a fizzbuzz interview with a candidate. He passed but I had a weird feeling about it so we asked him to do another one with 7 and 21 and he couldn't do it even with his old code right there

[-] ICastFist@programming.dev 13 points 1 year ago

Damn, dude managed to literally memorize code without having any idea of what was going on. Meanwhile, I'd spend most of my time trying to figure whether it's div or mod that i'm supposed to use to check for the remainder of a division, I always forget which is which

[-] themeatbridge@lemmy.world 6 points 1 year ago

It's slightly different because all numbers divisible by 21 are also divisible by 7, so you would get all Fizz and FizzBuzz but no Buzz. So the question is, should you even be checking for Buzz, or should you make your code more efficient by eliminating those lines?

load more comments (1 replies)
load more comments (1 replies)
load more comments (5 replies)
[-] bitsplease@lemmy.ml 21 points 1 year ago

OK - now I'm curious, what were the most common mistakes people made reading a tape measurer? Because I'm having trouble working out how someone could screw that up lol

[-] CADmonkey@lemmy.world 34 points 1 year ago

We had a guy we called "10/16" (ten sixteenths) because he was told to grab some 5/8" (0.625" or 16mm) steel plate, but he couldn't find any he could only find 10/16" and 12/16".

People will count the little lines on the tape and not remember if they are 1/32, 1/16, or 1/8.

I think metric would help this.

[-] bitsplease@lemmy.ml 22 points 1 year ago

Oh OK - that does make a bit more sense. Still not exactly Nobel prize material, but fucking up the fractions at least makes more sense than not knowing how to read numbers and count lines lol

Metric would help with everything lol. I dream of the day we finally make the switch

load more comments (2 replies)
[-] instamat@lemmy.world 12 points 1 year ago

Yeah, fractions are dumb. Or I’m dumb and fractions are easy, but why don’t we split the difference and switch to metric?

load more comments (1 replies)
load more comments (5 replies)
[-] SouthEndSunset@lemm.ee 12 points 1 year ago

Some people dont know why the metal bit riveted to the end moves...

[-] scarabic@lemmy.world 12 points 1 year ago

Or they even say this is a sign of wear and means you should throw it out.

And because I enjoy sharing knowledge more than boasting I know more than others: the reason it moves is to account for the thickness of the metal hook itself.

It makes a difference if you are hooking it onto the back of something and measuring from there, OR butting it up onto something and measuring from there.

If you want accurate and consistent readings in both of these situations, the hook has to move. It basically pivots around the true point you’re measuring from.

load more comments (1 replies)
[-] optissima@possumpat.io 8 points 1 year ago

Measure twice cut once is a saying for a reason.

[-] scarabic@lemmy.world 12 points 1 year ago

If you already knew this expression, here is chapter two:

Account for the width of the blade.

[-] limelight79@lemm.ee 7 points 1 year ago

Ahh our good friend, kerf!

load more comments (5 replies)
[-] bitsplease@lemmy.ml 7 points 1 year ago

At least for me, that has more to do with misremembering what I measured than mismeasuring it

Can't count how many times I the workshop I measured something, made a mental note of it, walked back to the workbench, only to have to walk back and remeasure it because now I've forgotten what I just measured lol

load more comments (2 replies)
[-] grue@lemmy.ml 8 points 1 year ago

“what is the difference between these two pieces of material” (one was aluminum, the other stainless)

Did they expect you to identify which metals they were, or just that they were different metals?

[-] CADmonkey@lemmy.world 14 points 1 year ago

I was expected to know that one was stainless steel and the other was aluminum, but not the specific grades of stainless or aluminum. Stainless and aluminum can look very similar when they're dirty, and 300 series stainless won't stick to a magnet just like aluminum won't stick to a magnet. But if you pick them up or even rap on them with your knuckles you can tell the difference.

[-] sp00nix@lemmy.ml 7 points 1 year ago

After having a customer chew us out for something that wasn't our fault he had us follow him to another room to discuss some more work. He borrows my tape measure and tries to measure something on the wall and the tape keeps falling over and flexing. It finally hits him in the face and hands it back to me and says "I'm not familiar with this type of tool". I think he saw our faces turn red and eyes water up as we were trying SOOO hard not to laugh.

[-] Mothra@mander.xyz 70 points 1 year ago

I want to wholeheartedly believe the caliper has the size the customer wants and the pipe is bigger, therefore inappropriate. I've never met anyone who would use a caliper this way, I've seen people trying to eyeball it or use it as a ruler but not like this

load more comments (2 replies)
[-] Machinist@lemmy.world 61 points 1 year ago

Oh jeebus fucking christ. Sometimes the dumb hurts and then you get the existential dread knowing you're about to have to call this moron. And, even better, they usually make more money than you.

load more comments (1 replies)
[-] lazyforaname@lemmy.world 52 points 1 year ago

So these guys are smart enough to read Vernier calipers, but dumb enough to measure like this?

load more comments (2 replies)
[-] Zehzin@lemmy.world 51 points 1 year ago

Anyone who works with clients can appreciate this one

[-] knorke3@lemm.ee 50 points 1 year ago

please close and reverse the tool, then grip it tightly and drive it into the skull of the complaining customer

load more comments (1 replies)
[-] Dubious_Fart@lemmy.ml 47 points 1 year ago

I am a certified blithering idiot and even I feel like a high society intellectual compared to this picture.

[-] Treczoks@lemm.ee 45 points 1 year ago

Next time, chose a smarter client.

[-] ryathal@sh.itjust.works 33 points 1 year ago
[-] Holzkohlen@feddit.de 9 points 1 year ago

Bold claim, also very true

[-] SouthEndSunset@lemm.ee 33 points 1 year ago
[-] CrowAirbrush@lemm.ee 18 points 1 year ago

Just for the fun of it: i'm making it 3 in my head. 1 extra to take the photo.

[-] SouthEndSunset@lemm.ee 10 points 1 year ago

Probably. And not one said "hey, thats not the full dimension of the hole".

[-] AnUnusualRelic@lemmy.world 26 points 1 year ago

Judging by this, even if it's the right size, they'll probably install it wrong anyway, so why bother?

load more comments (1 replies)
[-] Nurloc@feddit.nu 25 points 1 year ago

Showed this pic to my co workers (steelworkers/blacksmiths) and only the old guys knew what was funny about the pic... Gen z think that calipers are toy guns.....

[-] pancakes@sh.itjust.works 19 points 1 year ago

I use calipers frequently and didn't realize it was upsidedown until reading this.

I thought it was a joke about clients always sending shitty low resolution pictures where you can't actually verify their claim.

[-] ChickenLadyLovesLife@lemmy.world 14 points 1 year ago

Oh, I thought the joke was that the hole the customer was complaining about was the hole this pipe was supposed to fit into, and that they were measuring the inner diameter rather than the outer.

load more comments (1 replies)
[-] lutillian@sh.itjust.works 10 points 1 year ago

I dunno, a lot of gen z and millennials probably use them when fabricating parts for things that you can't get them for. I know I do for my printer.

load more comments (1 replies)
load more comments (5 replies)
[-] FleetingTit@feddit.de 24 points 1 year ago

A normal set of calipers has 3 basic modes of measuring things: inside, outside, and depth. It is amazing to me how many people in this thread don't know at least one of those or use them wrong.

[-] Silentrizz@lemmy.world 21 points 1 year ago

Til the calipers I use, almost daily, can measure depth. Now I'm less annoyed about the stick protruding from the end lmao

load more comments (1 replies)
[-] Black616Angel@feddit.de 9 points 1 year ago

Tbf I use mine daily and had to pause a second thinking what would be the third mode. (never use it to measure depth)

load more comments (6 replies)
[-] pigup@lemmy.world 22 points 1 year ago

They were trying to design a caliper holder that fits the jaws in that orientation, obviously. They need to fix this, send it back.

load more comments
view more: next ›
this post was submitted on 22 Aug 2023
1304 points (99.5% liked)

Memes

45755 readers
1214 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS