1020
submitted 1 year ago* (last edited 1 year ago) by RanchOnPancakes@lemmy.world to c/asklemmy@lemmy.world

I bought a piece of 1.5 inch stiff foam to try to fix a sag in a bed. It didn't work but having that thick piece of solid foam around has been a life saver.

Need something flat to put a laptop on? Throw it on the foam. Going to be doing something that requires you to be on your knees for a while? Get the foam!

It went from stupid purchase to something I'd gladly replace if it broke.

you are viewing a single comment's thread
view the rest of the comments
[-] Dathknight@feddit.de 110 points 1 year ago

A 3D-Printer, I thought I just play around with it and get bored, but you discover so many things that you can do!

The handle on the fridge broke? Print new ones. Need a Flowerpot? Just print one. The router needs a wallmount? I have one ready in a few Hours.

Also I can watch it print for hours, very fascinating and calming.

[-] JudahBenHur@lemm.ee 20 points 1 year ago

ventilate my dude. read up on breathing around your 3D printer while its printing. no bueno

[-] Vupperware@lemmy.world 10 points 1 year ago* (last edited 1 year ago)

Micro plastics making me feel spastic!

E: if you know the song I will give you a Lemon

[-] TwanHE@lemmy.world 16 points 1 year ago

Wait until you start printing more printers

[-] frumpyfries@lemmy.world 3 points 1 year ago

Dammit! I feel so attacked. But I can quit any time I want.

I just don't want to.

[-] ShooBoo@lemmy.world 7 points 1 year ago

I got one to print parts for my drones thinking it would be no big deal and it turned in to a hobby in itself.

[-] momentary@lemmy.ml 1 points 1 year ago

I've really been resisting getting into drones via my 3d printer. I just love the idea that I could print out parts and make my drone better and better!

[-] ShooBoo@lemmy.world 1 points 1 year ago

I only use it for things like guards, wire/cap/cameral holders... gopro case... things like that. but the frames are all carbon fiber. There are templates to print the entire drone out off the printer but I have not done that.

You can get the electronics pretty cheap. It might be a fun project for you :)

[-] rikudou@lemmings.world 5 points 1 year ago

I remember literally watching it for an hour when it was new, it was fascinating.

[-] GladiusB@lemmy.world 2 points 1 year ago

Now I'm thinking of getting one. But hear me out, I have a lot of tools already. And it will suck me in to stuff that I didn't know existed.

Get a Sovol SV06, it's going to be cheap, easy to use, and minimal maintenance. You won't regret it. Even if you just use it for jigs and custom clamp points, or something simple like replacing a missing end cap or something, every shop/garage/home can benefit from a 3D printer. It can be just another tool, or a hobby that consumes you, you can dive as deep as you want lol. Feel free to PM me if you have any questions!

[-] Urbanfox@lemmy.world 2 points 1 year ago

I found one in a bin, and after a dumpster dive and £10 worth of parts, it's now the most used appliances in my house.

[-] wipeitonthedog@lemmy.world 2 points 1 year ago
[-] Dathknight@feddit.de 1 points 1 year ago
[-] darreninthenet@sh.itjust.works 1 points 1 year ago* (last edited 1 year ago)

So noob question - I got a 3D printer relatively recently and have printed a few things with it by downloading files from various websites.

How do you go about making or getting files for your specific custom jobs like these please?

[-] Dathknight@feddit.de 1 points 1 year ago

I used FreeCAD to create my objects. It has quite a steep learning curve but it works for me.

I heard good things about TinkerCAD which should be easier to use for some quick ideas.

[-] H4Lambda@feddit.it 1 points 1 year ago

Yeah except you're never really saving a lot of money and even when you do some duct tape would have worked just fine

That's simply not true. Paying $250 for a printer of decent quality, and a few functional repairs will pay for itself..

[-] Dathknight@feddit.de 3 points 1 year ago

well, the handle was fixed with duct tape until I got a printer ...

nothing will ever truly replace duct tape!

this post was submitted on 12 Jul 2023
1020 points (99.0% liked)

Ask Lemmy

27240 readers
1175 users here now

A Fediverse community for open-ended, thought provoking questions


Rules: (interactive)


1) Be nice and; have funDoxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them


2) All posts must end with a '?'This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?


3) No spamPlease do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.


4) NSFW is okay, within reasonJust remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com. NSFW comments should be restricted to posts tagged [NSFW].


5) This is not a support community.
It is not a place for 'how do I?', type questions. If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.


6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online


Reminder: The terms of service apply here too.

Partnered Communities:

Tech Support

No Stupid Questions

You Should Know

Reddit

Jokes

Ask Ouija


Logo design credit goes to: tubbadu


founded 2 years ago
MODERATORS