My buddy has a cold plunge and this filter started cracking. After looking at it you can tell it's definitely 3d printed (and well)

On the left you can see my first attempt. I just cut rectangular holes in CAD and it's pretty close but not pretty. Printed in PETG on a K1 Max

Is there a way to do this in the slicer instead? I played around with 0 walls and different infill types but that didn't work out

Decided to do multicolor accents on a fosscad print and made a little cow from the purge material for my friend's kid

If you are using purge objects with you MMU you should start! Cuts the waste down to just mere grams.

This was made on a 3D chameleon hooked up to my K1 Max.

I've been playing some gyroscope based racing games on my phone and thought it would be cool to have a physical steering wheel to hold.

Since I already have a magsafe ring stuck to the back of my OnePlus Open I designed it to use magnets.

Functionally it makes the games way easier to play since you can really precisely tilt the phone. You can even steer one-handed pretty easily too

The magnets I used are a little weak so I'll be replacing that with another stronger magnet ring I have

Designed in fusion 360, printed in pla+ on K1max

I was experimenting with bottom patterns in Orca and octagon spiral looked cool. I tried it with RGB filament and it came out amazing!

There is a depth to it and it changes with the angle

I haven't seen this before online so figured I'd share!

I've been growing this same phenotype of sugar cane for a year and a half now. I just can't give it up!

It's a complete frost monster and a pretty good producer. The last plant was over a half pound! Just about 1g per watt!

Grown in 5 gallon DWC hydro

Might be moving to a Prohibition State soon :(
I'm hoping one of my neighbors will keep this pheno alive!

I am finally back to having a rooted phone after a decade! Feels nice to have control over my phone again.

The only thing left to get working again for me is the Samsung Wear connection to my Watch6.
I can get pretty far in the setup, but it eventually says it can't connect.

I tried the Magisk module GoogleSpoofForWear and even edited my .prop file, no luck! Safetynet passes and playintegrity is intact.

Followed every guide I could find, so reaching out to you guys for help! anyone get their watch working on a rooted phone? (android 14)

Edit "Solution": I was able to get it to work after fully resetting my watch. I kept the app magisk hidden but not sure if it was necessary... I didn't want to have to do that but at least it works now!

I made a magsafe mount in black for my Kia and I didn't like the layer lines on the curved parts, but it gave me the idea to try using wood

I have a 3D Chameleon MMU so I added color changes randomly throughout between two shades of brown. One is wood, one is PLA.

It honestly came out way better than I even expected!

If anyone wants the STL I can provide it!

cross-posted from: https://lemmy.world/post/12330194

cross-posted from: https://lemmy.world/post/12330141

cross-posted from: https://lemmy.world/post/12330066

I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone.

I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device!

Speakers, USB and pen are all accessible still.

I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks. Also selling printed cases for those without a printer!
(Frogcase)

cross-posted from: https://lemmy.world/post/12330141

cross-posted from: https://lemmy.world/post/12330066

I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone.

I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device!

Speakers, USB and pen are all accessible still.

I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks. Also selling printed cases for those without a printer!
(Frogcase)

I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone.

I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device!

Speakers, USB and pen are all accessible still.

I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks (Frogcase)

I finally got multi-color working on my Creality K1 Max using the 3D Chameleon.

Decided to make a 2 color benchy and scaled it down to 75% to save time, along with 0.25mm layer height.

So far the Chameleon has been pretty picky with filament, but when it works it works well! This print is with silk gold and matte black. I have even gotten 95A TPU to print with it surprisingly!

I modified the color-change code so it takes 1 minute less, which makes a big difference when you have hundreds of color changes.

Next up, 4 color benchy. Probably will be 10 hrs lol

I know this is very specific to my devices, but thought I'd share anyways. Really happy with how this came out and how convenient it is.

I have been playing with this idea for a while and finally designed it. This charges my ZFold3, Galaxy Watch6 and XROS vape all at the same time on my nightstand.
Phone and watch chargers are wireless, vape charger is a cable inserted to make a 'dock'.

I designed slots in the bottom so the cables all route out the back.

I added a little area at the front for miscellaneous items, like lip balm and coins.

I'm kicking myself now for not including a place to put my glasses, but I might design something to attach to this existing dock for them to go.

without phone/watch/vape

underside