While its likely true that the wing panel was both non-critical and secure, I'd be much more worried that if they missed something like that, that they could have missed any number of other things as well. Isn't there supposed to be some sort of check-list run?
Pilots perform an inspection of the aircraft before every flight. Missing fasteners on the top of the wing would not be visible during a walkaround from the ground.
Planes are allowed to fly with many parts missing. A few missing fasteners on a non structural part is fine, but missing fasteners that the pilots are unaware of is a big issue.
Shouldn't that inspection include looking at the top of the wing out the windows?
There isn’t much on top of the wing that is highly critical. Some planes you can’t even see the top from anywhere in the plane too. An actual issue like leaking fluids or damaged flight control surfaces are visible from the bottom. Something like a few missing fasteners really isn’t t that alarming. I’ve flown plenty of times with some missing, sometimes speed taped and sometimes both the first few times I asked the crew chief but eventually I became familiar with where and how many missing weren’t an issue.
I’ve flown plenty of times with some kissing
How about heavy petting?
We're going to have to start walking around the plane with the pilot before takeoff like a rental car dent check.
I knew software companies were offloading QA testing onto their paying users, but who would have guessed that passengers would start playing that role too?
Some big wig had to go to target one day and saw the self checkout line and was like "I have an idea!"
In return, he had a conversation with a big wig from Target where he taught them how many checkout stations you could actually cram into a tiny space.
Early Access Airplane
Given how completely the airline industry disregards customer service and treats its customers like cattle, I don’t know why anyone would expect them to do a proper job of maintaining equipment. Furthermore, given how eager we are to gut regulation and dismantle the administrative state, all of this is going to just keep getting worse and worse.
British traveler Phil Hardy, 41, was onboard Flight VS127 at Manchester Airport in the UK on Jan. 15 when he noticed the four missing fasteners during a safety briefing for passengers and decided to alert the cabin crew.
“I thought it was best to mention it to a flight attendant to be on the safe side.”
Neil Firth, the Airbus local chief wing engineer for A330, added that the affected panel was a secondary structure used to improve the aerodynamics of the plane.
Hardy said airline staff repeatedly reassured him there was no safety issue with the wing, but his fear was heightened given the recent ordeal in which an Alaska Airlines plane lost its door plug and a chunk of its fuselage flew off mid-flight.
“Each of these panels has 119 fasteners, so there was no impact to the structural integrity or load capability of the wing, and the aircraft was safe to operate,” he said.
“As a precautionary measure, the aircraft underwent an additional maintenance check, and the fasteners were replaced.”
Noteable comments:
The fasteners were not "replaced"....they were now properly included, as per the design. The public is not reassured if you cannot use precise or non-ambiguous language. It's better to state that it was an oversight or be specific: i.e. the design calls for a maximum of 119 fasteners, but allows for a minimum number (x), and thus it was allowed to fly. - tyrionsBeard
Great! So not only do you have to pay extra for a seat, checked bags but you have to check the wings before take off. That man should be credited for their flaw. - Mabel
New York Post is a right wing shitrag like The Daily Mail.
What do you think the implications of that are for this article reporting a completely non-political incident?
Probably that they generally don't care about getting a story right or corroborating sources. I agree that in this case that doesn't matter for getting the high level facts across.
They get traffic and unless someone comments otherwise, a slight boost in perceived respectability
Everything is political, at least with them.
The pilot should’ve walked out onto the wing, slapped a couple lengths of duct tape on that section, then carefully and loudly exclaimed; “ YUP! That baby ain’t goin’ anywhere.” while patting the area firmly.
It's called speed tape, and genuinely is a thing used in the industry.
I imagine a lot of the passengers were pissed off when the flight was cancelled because one of their fellow passengers reported some non-critical bolts were missing.
I'd have been grateful.
I think it's entirely reasonable to see something obviously missing on the wing of a plane, even something small, and wonder what else isn't properly secured. I'm sure a plane with four missing allen head screws on that panel is fine. I wouldn't fly on it without an assurance that it wasn't a sign of other poor practices.
It's not like the passenger knew they were non-critical. I certainly wouldn't have wanted him to stay silent only for it to turn out they were critical. They also wouldn't unboard and inspect a plane just on the insistence of one passenger, they'd deplane that one passenger if anything. The fact that they did do an additional inspection implies that safe or not, those missing bolts were not noticed in the initial inspection, which leads one to wondering if they missed anything else.
I would have been fine with not dying in the event it ended up being a real problem. An inconvenience is better to deal with than a plane crash.
Planes have so much redundency that theres a lot that's uncritical, until suddenly it is critical.
Ideas for a better world #233
Rename your phone hotspot to "I saw a loose bolt on the outside of the plane" and turn it on in the gate waiting area bar.
you can't just screwdriver those things in there man you have to torque them in to the proper spec holy balls
I think they were checking how loose the others were rather than tightening them.
Well they are Phillips has so I can't imagine you can even torque them that much.
Interestingly enough they are not Phillips it is a very similar looking standard called Torq-set. The lines of the cross are off set a little which make it much easier to put a higher torque into them.
https://en.m.wikipedia.org/wiki/List_of_screw_drives#/media/File%3AScrew_Head_-_Torq-set.svg
At some point, that part was taken off the plane and it was replaced, or maintenance was done on it, or maintenance was done on something underneath it. It was then replaced. There is a documentation trail that says all of this was fully completed. The documentation was signed off on by someone who was qualified in this task, and/ or by a supervisor who checked it off.
If there is no documentation, or if the documentation indicates something was done that was in fact not done, the CAA/ FAA is going to have a big problem with this. They are sort of interested in how maintenance is done and documented. If they didn't do this right, what else are they/ have they been "pencil whipping?"
I can see a pretty thorough inspection of their maintenance practices and documentation in the near future. If they find a pattern of this, the maintenance gets decertified and the airline can't fly until they are cleared.
There's a massive failure in maintenance and Operations' culture here. This isn't the exact sort of situation where you'd use LOTO, but you need something similar. Lock the engine in the off position until the removed part is properly reinstalled.
I want to call maintenance errors like this rookie... But they really aren't. There's plenty of plant incidents where people either don't have a proper procedure or don't follow it, and a welder tries to work on a live gas line. Or someone opens a valve without realizing it needs to be closed.
I still say we fine the companies and hold the CEOs personally responsible, because the buck stops there, and these mistakes are more likely to happen in an organization that doesn't have a robust safety culture.
So lucky they spotted it. Really makes you think, wouldn't it be good to implement a system of regular professional inspections to deal with stuff like that? /s
Regular Inspections fix small issues before greater problems arise from them --> some economist with no technical knowledge or common sense goes: hurp de durp our inspections never fix any relevant defects. Better cut back on them to be more economic. --> surprisedPikachu.jpeg
Well no. Those are the accountants. Economists have studied survivorship bias. It's the MBAs and accountants looking to cut costs that do that stupid shit.
Speed holes
NY Post? Be serious, don't post that drama rag here.
Don't worry! There were 119 fasteners being used. Ignore the fact that 4 were missing. The plane was designed to use whatever number of fasteners we want. The amount is just a suggestion
/s
For what it's worth, just about every panel like this is certified to have a specific number of fasteners missing. A lot of the time there will be some other qualifiers such as not missing the leading fastener or not missing adjacent fasteners. Having a bunch in a row like this incident would probably not be ok, but I couldn't say without the maintenence manual.
Planes are designed to have very high tolerances so yeah, they have more fasteners than necessary for exactly this reason. Of course you still want to fix it, but they are absolutely designed to not need them all.
~~Stealing catalitic converters for money~~
Stealing bigass phillips screws from planes
--petty theift criminals
If Benny Hill wasn't playing in the background an opportunity was missed.
Seeing how disorganized and chaotic airports are, I'm not surprised.
Welcome to the News community!
Rules:
1. Be civil
Attack the argument, not the person. No racism/sexism/bigotry. Good faith argumentation only. This includes accusing another user of being a bot or paid actor. Trolling is uncivil and is grounds for removal and/or a community ban. Do not respond to rule-breaking content; report it and move on.
2. All posts should contain a source (url) that is as reliable and unbiased as possible and must only contain one link.
Obvious right or left wing sources will be removed at the mods discretion. We have an actively updated blocklist, which you can see here: https://lemmy.world/post/2246130 if you feel like any website is missing, contact the mods. Supporting links can be added in comments or posted seperately but not to the post body.
3. No bots, spam or self-promotion.
Only approved bots, which follow the guidelines for bots set by the instance, are allowed.
4. Post titles should be the same as the article used as source.
Posts which titles don’t match the source won’t be removed, but the autoMod will notify you, and if your title misrepresents the original article, the post will be deleted. If the site changed their headline, the bot might still contact you, just ignore it, we won’t delete your post.
5. Only recent news is allowed.
Posts must be news from the most recent 30 days.
6. All posts must be news articles.
No opinion pieces, Listicles, editorials or celebrity gossip is allowed. All posts will be judged on a case-by-case basis.
7. No duplicate posts.
If a source you used was already posted by someone else, the autoMod will leave a message. Please remove your post if the autoMod is correct. If the post that matches your post is very old, we refer you to rule 5.
8. Misinformation is prohibited.
Misinformation / propaganda is strictly prohibited. Any comment or post containing or linking to misinformation will be removed. If you feel that your post has been removed in error, credible sources must be provided.
9. No link shorteners.
The auto mod will contact you if a link shortener is detected, please delete your post if they are right.
10. Don't copy entire article in your post body
For copyright reasons, you are not allowed to copy an entire article into your post body. This is an instance wide rule, that is strictly enforced in this community.
