We were so preoccupied with whether or not we could that we didn't stop to think if we should.
Diabeetus
Yeah but tell me more about this stuffed waffle maker. I have never heard of these and as I type I realize I sound like the shill part two.. still curious though, does it make like a waffle sandwich?
It basically makes a thick waffle, thick enough where it has room to encapsulate fillings too. The maker is like your standard waffle maker but there's a removable spacer with a handle between the sides. For these waffles, you put in about half a cup of batter, add your fillings, then add another half cup on top of it. Then you close the maker and flip it over.
After it cooks, you use the removable spacer to remove the waffle and release it onto a plate. I attached a picture I snagged off the Internet so you can see what I'm talking about.
We've had ours for a couple of years. I got it as a drunken impulse buy, so drunk me surprised sober me when it showed up. It has been pretty awesome. One of my favorites is plain waffle batter filled with fruit pie filling, topped with maple syrup and whipped cream.
I’m just having trouble picturing how the spacer works without ripping the waffle apart when removed. Is it like a rod? Cause I’m picturing a ping pong paddle type spacer but that wouldn’t pull out, or are the waffle top and bottom not cooked together?
I’m pretty sure that middle bit is like a springform pan. The handle is not solid - you squeeze it to make it sit in the waffle maker but when you remove it, it opens a bit to release. I have no room for this in my kitchen but am intensely intrigued. I might buy a new house so I can get a bigger kitchen and have a place for this.
It's like overzeetop said, it's a ring with a split on one end and a springed handle on the other. It slides into grooves on the top and bottom sides of the griddle.
When the waffle is done, you gently squeeze it to get it out of the groove, in the progress gripping onto the waffle, then the ring portion will separate slightly when you let go. It's non-stick so the waffle typically just falls out.
I took a picture of mine. Don't judge, we haven't run the dishwasher yet.
Based on the picture it looks like the spacer is just a ring around the middle, and the top and bottom seal the whole thing up when you close it. As long as you’ve sprayed non-stick spay on all the parts you should be able to pop the top and then lift the ring out and extract the entire giant waffle in one go. Then, I’m guessing, the ring can expand near the handles to release the waffle, and then you lift it away.
i am intrigued as well. definitely gonna look this up. i'm already coming up with ideas, like using pizza dough for 'batter' and toppings, cheese and sauce for 'filling'.......
We've tried dough but it can be a little tricky. You need enough dough that it'll press together when you close the unit, but not so much that it squeezes the fillings out. It's a pretty narrow volume window. We've made pizza waffles using standard waffle batter with added fresh basil and Parmesan and mozzarella cheese plus pizza toppings in the middle and that worked great.
Dang man! What other good ideas have you got??
It does make a waffle sandwich. They aren't bad.
But, it takes about 10 minutes to cook, then 5 minutes to get hot enough to make another. So if you're just making it for yourself, it's fine. But if you're wanting to make them for like more than 2 people, it's a problem.
That waffle thicc af. Damn.
If it's 5/7, is it really perfect...? 🤔
Also, I'm sure it's delicious, but I couldn't stop thinking about the calories. This must be half a day's calories in one delicious meal!
If it’s 5/7, is it really perfect…? 🤔
No matter how long you've been on the Internet, there's always more to learn.
You're one of today's lucky 10,000
You're spot on. I only eat one meal a day and this was Sunday brunch. It's about 800 calories per waffle, nearly 1000 if you add sausage.
Well, if you're going to do OMAD, seems like a tasty way to do it!
This is the second time I’ve seen cheddar bay waffles recommended. Fuck it! I have a box of this in the cupboard and a pizzelle maker. I’ll report back next weekend.
Is there a recipe so I don't have to buy the mix and can just use basic ingedients?
When I make them I do bisquick biscuits with a handful of shredded cheddar. A little melted butter and italian seasoning tops it off.
And garlic or at least garlic powder
Great choice!
Wow... this isn't even the first time I've seen this recommended. That's really funny.
Literally already the second this THIS WEEK.
I'm just gonna leave some copycat Cheddar Bay biscuit recipes here in case it IS Red Lobster shilling after all...
https://www.allrecipes.com/recipe/7146/cheddar-bay-biscuits/
https://damndelicious.net/2014/02/03/red-lobster-cheddar-bay-biscuits/
https://therecipecritic.com/red-lobster-cheddar-bay-biscuits/
https://www.onceuponachef.com/recipes/cheddar-bay-biscuits.html
https://www.spendwithpennies.com/red-lobster-cheddar-bay-biscuits/
I've made these copycats with bisquick ( allrecipes) and its pretty good. I bet it'd work in my waffle maker.
this time it's to sell a waffle iron
For guys without universal healthcare yous sure like to have the inside of your arteries looking like fuckin shagpile carpets 😂
yeah, but when the sun's coronal mass ejection causes civilization to collapse, americans will be able to eat americans for a long time...
You Should Know
YSK - for all the things that can make your life easier!
The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:
Rules (interactive)
Rule 1- All posts must begin with YSK.
All posts must begin with YSK. If you're a Mastodon user, then include YSK after @youshouldknow. This is a community to share tips and tricks that will help you improve your life.
Rule 2- Your post body text must include the reason "Why" YSK:
**In your post's text body, you must include the reason "Why" YSK: It’s helpful for readability, and informs readers about the importance of the content. **
Rule 3- Do not seek mental, medical and professional help here.
Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.
Rule 4- No self promotion or upvote-farming of any kind.
That's it.
Rule 5- No baiting or sealioning or promoting an agenda.
Posts and comments which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.
Rule 6- Regarding non-YSK posts.
Provided it is about the community itself, you may post non-YSK posts using the [META] tag on your post title.
Rule 7- You can't harass or disturb other members.
If you harass or discriminate against any individual member, you will be removed.
If you are a member, sympathizer or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people and you were provably vocal about your hate, then you will be banned on sight.
For further explanation, clarification and feedback about this rule, you may follow this link.
Rule 8- All comments should try to stay relevant to their parent content.
Rule 9- Reposts from other platforms are not allowed.
Let everyone have their own content.
Rule 10- The majority of bots aren't allowed to participate here.
Unless included in our Whitelist for Bots, your bot will not be allowed to participate in this community. To have your bot whitelisted, please contact the moderators for a short review.
Partnered Communities:
You can view our partnered communities list by following this link. To partner with our community and be included, you are free to message the moderators or comment on a pinned post.
Community Moderation
For inquiry on becoming a moderator of this community, you may comment on the pinned post of the time, or simply shoot a message to the current moderators.
Credits
Our icon(masterpiece) was made by @clen15!