159
top 50 comments
sorted by: hot top controversial new old
[-] veeesix@lemmy.ca 78 points 8 months ago

At launch, Google's VP of Real Estate & Workplace Services, David Radcliffe, said the site "marks the first time we developed one of our own major campuses, and the process gave us the chance to rethink the very idea of an office." The result is a wild tent-like structure with a striking roofline made up of swooping square sections.

In other words, they erected themselves a circus tent. Ironic.

[-] Midnitte@beehaw.org 16 points 8 months ago

Hilarious in a way...

Of course Google would have problems with the very foundation of a technology needed for business when choosing to design the building themselves.

Like, they couldn't consult with a professional.

Seems very... on brand for Google now.

[-] God_Is_Love@reddthat.com 15 points 8 months ago

I kept reading it as Daniel Radcliffe and I was like why the HECK is he working there?

[-] Bishma@discuss.tchncs.de 78 points 8 months ago* (last edited 8 months ago)

Is this going to be the first building on KilledByGoogle.com?

[-] Rentlar@beehaw.org 78 points 8 months ago

"Why hasn't anyone designed a building like this before?"

"Oh."

[-] anachronist@midwest.social 69 points 8 months ago

"You know what would be totally sick? What if we made our building's roof into a matrix of inverted metal parabolas?"

[-] wise_pancake@lemmy.ca 37 points 8 months ago

Sometimes it becomes clear a company is trying to do too much when these problems manifest.

[-] memfree@beehaw.org 34 points 8 months ago

I appreciate that the "Gradient Canopy" roof is covered in solar cells and collects rainwater while also letting in natural light, so maybe the problem is they didn't do enough by not adding in some shielding, too.

[-] wise_pancake@lemmy.ca 12 points 8 months ago

That is really really cool

[-] coffeejoe@lemmy.dbzer0.com 33 points 8 months ago

Sounds like bad WiFi design not building design.

[-] Ephera@lemmy.ml 52 points 8 months ago

I could imagine that those concave metal roof sheets reflect the electromagnetic waves all over the place, causing tons of interference...

[-] CanadaPlus@lemmy.sdf.org 8 points 8 months ago

Are they not equipped to deal with that? You'd think large metal surfaces are pretty common, so it'd be a bigger issue if so.

[-] Ephera@lemmy.ml 9 points 8 months ago

Well, straight metal surfaces are a whole different story from concave metal surfaces.
The former causes interference in a line in one specific direction, with roughly the width and height of said metal surface.
Concave metal surfaces on the other hand, can easily blast a whole room, depending on how concave they are.

And I'm a bit out of my water here, but I believe, modern WiFi does try to

  1. direct its EM-waves towards the recipient, rather than send in all directions.
  2. adjust the strength of its signal, so that it reaches the specific recipient and not that much more beyond that.
  3. resolve multipath issues, so where a recipient can be reached in two or more ways, e.g. directly and through a reflecting metal surface. It can attempt to do so with 1) and 2).

But yeah, ultimately this can't be an exact science. Recipients move around. Interferences move around. You still need additional EM-waves to advertise yourself as WiFi to disconnected devices. A reflecting interference may be situated behind a recipient, where you do need to send signals to.

And of course, no one expects ~~the Spanish Inquisition~~ Google's house of mirrors, where any misdirected EM-wave will interfere with everything else in the room. That just ramps up any imperfections in WiFi by a lot...

load more comments (1 replies)
[-] LostXOR@fedia.io 7 points 8 months ago

Yeah I'm thinking that's most likely the problem.

[-] cmnybo@discuss.tchncs.de 20 points 8 months ago

Bad building layout could cause multipath issues though.

[-] Gormadt@lemmy.blahaj.zone 16 points 8 months ago* (last edited 8 months ago)

Shit where I work the cell service is terrible inside the building but the moment you walk outside the building it's perfect

Our building has a wavy metal roof and wavy metal siding

Edit: Spleling

[-] Atelopus-zeteki@kbin.run 12 points 8 months ago

LoL mroe spleling.

[-] coffeejoe@lemmy.dbzer0.com 2 points 8 months ago

This is what mimo uses to speed things up.

[-] teawrecks@sopuli.xyz 4 points 8 months ago

Yeah, whoever designed radio waves wasn't thinking about the potential for creative architecture!

[-] theneverfox@pawb.social 2 points 8 months ago

To put it more descriptively, when you do industrial scale WiFi, you're supposed to design out the network during the blueprint stage, then go through with a signal analyzer to map out the radio properties when it's time to install the telecom

You can put an access point in every room or every 30 feet, and tune them to work seamlessly without interference. You can do the same with cell signals too. They even make cables that are also the antenna - they're cut with gaps in the shielding, so you can get perfect coverage inside an iron maze if you wanted to

It's all just a matter of cost... It's not cheap, but a few million dollars is just a line item at that scale

[-] kinttach@lemm.ee 30 points 8 months ago

This doesn’t sound like a serious problem for a company like Google. They can afford to solve it by brute force — just put a Wi-Fi hotspot in every single room.

[-] Zworf@beehaw.org 19 points 8 months ago* (last edited 8 months ago)

Which is also what you want really, if you have everything on WiFi. High density setups with really small cells so you can reuse channels. A building with high signal attenuation helps with that.

Having said that I'd never want to work for a company like Google.

PS:

Bad radio propagation means Googlers are making do with Ethernet cables, phone hotspots.

"Making do with Ethernet cables"? For me that's still the most reliable and secure way of doing networking on computers. You're at a desk, why not have a cable there. For mobile devices, sure. At my work every docking station has a cabled connection luckily.

[-] Kit@lemmy.blahaj.zone 7 points 8 months ago

That would be problematic on many levels.

[-] cooljacob204@kbin.social 14 points 8 months ago

Not really. Radios can be tuned if you're talking about interference.

[-] Helix@feddit.de 10 points 8 months ago
[-] Kit@lemmy.blahaj.zone 2 points 8 months ago

Radio interference and roaming are the primary concerns. There's only so many channels that Wi-Fi can run on, and they will clash if there's too many APs near the same band. You also have to ensure that each device is configured to disconnect from a weak signal and connect to a stronger one when moving from room to room, which realistically doesn't work flawlessly. You want to instead have a few powerful access points in each wing or whatever needs dictate.

load more comments (1 replies)
[-] DdCno1@beehaw.org 2 points 8 months ago

This is a very common approach, as a meshnet, of course.

[-] Moonrise2473@feddit.it 3 points 8 months ago

But if they spend millions on WiFi hotspots then how they can pay the dividends to the shareholders? If you listen to them the company is barely profitable and more cuts are needed

[-] CanadaPlus@lemmy.sdf.org 2 points 8 months ago

I'm not even sure that would be a bad solution for us. Can something like a Raspberry Pi work as a hotspot?

I wonder what exactly it is that's messing with the signal.

[-] watson387@sopuli.xyz 13 points 8 months ago

My house was built in 1967. It's a solid house. The walls are plaster and they have chicken wire in them. WiFi is a nightmare. I ended up running a few hard lines and using a mesh system.

[-] DdCno1@beehaw.org 3 points 8 months ago

Same here, but the house is a few decades younger, has brick walls and thick reinforced concrete floors. Early WiFi was rough, let me tell ya. At one point, I improvised a directional WiFi antenna out of Styrofoam and precisely cut wires, which actually worked. I tried three generations of DLAN after that, all of which were horribly unreliable and had nowhere near the advertised performance. I'm now moderately happy with a meshnet, which is so reliable that I forgot how to log into it to configure it.

[-] towerful@programming.dev 2 points 8 months ago

Any computer with a network port and a wifi adapter can be turned into a wifi access point.
But there are cheaper and better alternatives than a raspberry pi

[-] CanadaPlus@lemmy.sdf.org 2 points 8 months ago* (last edited 8 months ago)

That's probably true. Any examples off the top of your head? (I obviously haven't had to deal with this recently)

load more comments (2 replies)
[-] JakenVeina@lemm.ee 16 points 8 months ago

Why the hell is a professional tech business not relying almost-exclusively in ethernet, anyway?

[-] B0rax@feddit.de 37 points 8 months ago

Because if you walk to a meeting room with your laptop, you don’t want to plug it in every time.

Also phones and tablets are a thing.

[-] jarfil@beehaw.org 8 points 8 months ago

Because WiFi speeds have increased to the point where they rival wired connections, and most people use laptops which make wireless more convenient.

Wired nowadays only makes sense if you need to move massive amounts of data, want to use PoE, ...or are in a high interference area. Kind of ironic they'd design a building that makes it the latter.

[-] SomeoneSomewhere@lemmy.nz 3 points 8 months ago* (last edited 8 months ago)

Aggregate bandwidth now rivals or slightly exceeds gigabit wired connections.

Where that aggregate bandwidth is shared amongst large numbers of users, bandwidth per user can suffer dramatically.

Low density areas may be fine, but cube farms are an issue especially when staff are doing data intensive or latency sensitive tasks.

If you're giving employees docking stations for their laptops, running ethernet to those docking stations is a no-brainer.

Moving most of the traffic to wired connections frees up spectrum/bandwidth for situations that do need to be wireless.

[-] meteorswarm@beehaw.org 4 points 8 months ago

They mostly don't even give out desktops to devs these days, everything is in the cloud.

[-] Pyr_Pressure@lemmy.ca 2 points 8 months ago

Do they not give out laptops with an Ethernet port? Or is the extra 2lbs too much?

[-] meteorswarm@beehaw.org 3 points 8 months ago

At least in my faang office, there's essentially zero ports to plug into. If you have a desktop, there's a port, but that's the exception. I've never seen anyone plug a laptop in.

[-] nothacking@discuss.tchncs.de 11 points 8 months ago

I would think the metal parts of roof might be reflecting signals all around the building, which would cause interference between devices. (there is a limited number of WiFi channels), it might work better with a plastic roof, or one with RF absorbers.

[-] AlexisFR@jlai.lu 6 points 8 months ago

Why didn't they send an email to their facilities? How are we supposed to care?

[-] autotldr@lemmings.world 3 points 8 months ago

🤖 I'm a bot that provides automatic summaries for articles:

Click here to see the summaryReuters reports that Google's first self-designed office building has "been plagued for months by inoperable or, at best, spotty Wi-Fi, according to six people familiar with the matter."

At launch, Google's VP of Real Estate & Workplace Services, David Radcliffe, said the site "marks the first time we developed one of our own major campuses, and the process gave us the chance to rethink the very idea of an office."

The roof is covered in solar cells and collects rainwater while also letting in natural light, and Google calls it the "Gradient Canopy."

All those peaks and parabolic ceiling sections apparently aren't great for Wi-Fi propagation, with the Reuters report saying that the roof "swallows broadband like the Bermuda Triangle."

Googlers assigned to the building are making do with Ethernet cables, using phones as hotspots, or working outside, where the Wi-Fi is stronger.

A Google spokesperson told Reuters the company has already made several improvements and hopes to have a fix in the coming weeks.


Saved 45% of original text.

[-] intensely_human@lemm.ee 3 points 8 months ago

All this tells me is that ancient Chinese evil spirits were made of wifi.

[-] eveninghere@beehaw.org 2 points 8 months ago

Why is arstechnica so cynical about specifically big tech?

[-] drwho@beehaw.org 11 points 8 months ago

There's plenty in Big Tech to be cynical about, whether you work for them or not. Ars can get away with it.

load more comments (2 replies)
load more comments
view more: next ›
this post was submitted on 11 Mar 2024
159 points (100.0% liked)

Technology

37735 readers
531 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS