there used to be a more accessible toggle in settings for that. why tf would they take that out?

vote for him for what? he's done.

right?

right?!?

translation: "tay's too old for me to juice the 'shroom to. sidney at least can look like a 'teen'"

they priced the new one too high, so now they're raising the old one up so people (especially newcomers to the platform) will think it's not so bad?

i only recently moved my main home pc from 8.1. there's configs and software on it that would be difficult or impossible to recreate on a new install or pc. i even have a spare identical mb and cpu in case it's needed. 1st gen. mechanical disks (several, sata ssd wasn't that much of an improvement with the old controller for everyday use so i opted to keep the higher capacity) 32gb ram and pascal gpu. i skipped all the way to a rufus'd 11 and it's actually running well (with all the crud ripped out, though). it dual boots with endless on a loop device. the upgrade didn't even mess that up.

updates. the constant barrage of updates. the cpu, ram, and disk time needed just to 'check' for updates is horrible (it used to be a lot worse, too). and if you are still on an old-school mechanical hdd, those 'cumulative' updates are absolutely brutal every month with win10 or 11.

last week i booted-up a silverblue that hasn't been run in a couple months. 8gb, mechanical disk, not a speed demon either--3rd or 4th gen. i didn't even notice the updates were coming in until the notification popped up saying they were done.

if you go in not knowing what to do, it can seem 'difficult'. but it's mostly like on any other oem prebuilt:

optional: prep the target disk (backups, wipe or clear part table, etc), reset bios to defaults.

if necessary: switch from raid or rst to ahci sata mode, default boot mode to efi, disable secure boot. note that some distributions support secure boot but your method of creating an installer might not--you may be able to re-enable if you want after install.

note that hp systems have a hoop to jump through (a confirmation prompt to disable) after disabling secure boot on the next startup. do not use esc key to trigger boot menu, use f9 for boot menu, f10 for bios entry.. as esc will cancel the confirmation code prompt and automatically re-enable secure boot.

insert or plug-in installer, hit the magic key upon power on (f12 for dell, f9 for hp) to bring up boot menu and select installer media, boot and run installer.

They explicitly did not accuse the Trump campaign of seeking out or cooperating with the Russian interference

"russia, if you're listening.."

busch still works here, too. anheuser-busch was acquired by belgium-based inbev in 2008.

you're looking at this

It took eight years to go from 1% to 2% (by April 2021), then just 2.2 years to reach 3% (June 2023), and a mere 0.7 years to hit 4% (February 2024). Now, here we are, at over 5% in the USA

and yea, it's a good sign. but it actually took thirty-one years to get here.

Depends on your CPU

absolutely. some cpu can draw more than the 180 watts of a 5060ti, even without actual 'overclocking', all by themselves when boosting their own clock (such as intel's "turbo power"). even a '65 watt' ultra 7 265 can get up to that.

i always look for the 'guest' checkout option. some merchants have it, and i'll choose them over somewhere like azn if the price is reasonably close.