134
top 37 comments
sorted by: hot top controversial new old
[-] Etterra@discuss.online 58 points 2 months ago

As long as it's not male-to-male electrical extension cord.

[-] HobbitFoot@thelemmy.club 30 points 2 months ago

Just another list in a long line of gay exclusion.

[-] bdonvr@thelemmy.club 6 points 2 months ago

Really this would only be useful in a FMMF bi foursome

[-] GoodLuckToFriends@lemmy.today 4 points 2 months ago

That sounds like a really good time.

[-] iamdefinitelyoverthirteen@lemmy.world -1 points 2 months ago* (last edited 2 months ago)

People need to stop using gender with cabling. It's confusing as hell. They're plugs, which mate with (plug into) receptacles, and there are pins, which mate with sockets! Is a plug with sockets male or female? What about a receptacle with pins?

As a wire harness master, I will die on this hill.

[-] lime@feddit.nu 4 points 2 months ago* (last edited 2 months ago)

if it has pins it's male because it shouldn't have any power. feminist electrical theory.

[-] altima_neo@lemmy.zip 6 points 2 months ago

A local electronics shop around here is selling one of those as a joke. Except it has a male plug on one end and a 220 volt dryer plug on the other.

[-] Stamets@lemmy.world 4 points 2 months ago

You know, I never thought about this. Presumably it would just blow a fuse or trip the breaker, right?

[-] traches@sh.itjust.works 25 points 2 months ago

People want them to conveniently power their house during an outage. Plug one end into a generator, the other into a random socket, and poof! You have power (so long as your house isn’t drawing more than whatever breaker you’re plugged into)

Problem is unless you turned off the whole-house-breaker, you are now feeding electricity back upstream into the grid. This is very bad. The friendly linemen who are working to get your power back on can’t de-energize the lines they’re trying to fix and will have a hell of a time working out which house is causing the problem.

[-] Zetta@mander.xyz 24 points 2 months ago* (last edited 2 months ago)

While that is true the main reason they aren't made is not because of your stated reason, the main reason they aren't made is because you have two live metal prongs ready to kill when one end is plugged into power.

[-] Albbi@lemmy.ca 9 points 2 months ago

You say kill, I say take a trip to the breaker box to reset it after a light taze.

[-] XeroxCool@lemmy.world 3 points 2 months ago

You'll trip a gfi breaker, but probably won't breaker a standard 15a breaker unless you're quite wet and very touchy-freely with the ground.

[-] Albbi@lemmy.ca 1 points 2 months ago

I just saw this post before reading your comment about being touchy-feely with the ground. haha

[-] iAmTheTot@sh.itjust.works 4 points 2 months ago

Interesting, I had never heard this. I understood people wanted them for Christmas lights, which would leave an exposed live end.

[-] neumast@lemmy.world 7 points 2 months ago

The cable itself won't do any damage. The problem is, what ppl do with it. Also if you plug it into a socket, you get a super secure not dangerous at all live wire to touch on the other side.

[-] swab148@lemm.ee 1 points 2 months ago

Sounds delicious

[-] Eheran@lemmy.world 18 points 2 months ago

I assume you mean male to male? Female to male type A is a simple extension.

[-] dual_sport_dork@lemmy.world 22 points 2 months ago

Technically USB A male-to-female extension cables are also forbidden, at least in terms of USB 1/1.1/2.0 and were never supposed to exist. That's not to say that they didn't, because they certainly do, and sometimes even manage to work in the process. But the original USB spec specifically envisaged that a passive extension cable should never be available to the consumer, probably for the simple reason that the maximum allowable cable length was 5 meters with no ifs, ands, or buts. And USB 3.x is only 3 meters. If allowed, people would inevitably daisy-chain so many cables together that their connected device would stop working, and then whine at the manufacturer/retailer/Microsoft about it being "defective," so this was nipped in the bud in advance.

All that said, I have nevertheless accumulated about 20 of the damn things over the years in varying lengths and levels of quality. I have violated the official cable length spec with impunity and more often than not gotten away with it, albeit usually only for low-demand devices like keyboards.

[-] Aatube@kbin.melroy.org 0 points 2 months ago

If it's a Universal serial bus why should connecting things over long distances be banned?

[-] dual_sport_dork@lemmy.world 2 points 2 months ago

It's not a matter of banned, it's a matter of physics. Every connection standard has a maximum length specification, the point beyond which you will not get reliable data transmission due to either signal loss via impedance in the wires, or timing issues.

[-] JayleneSlide@lemmy.world 10 points 2 months ago

I have one of these 8bitdo sticks. It performs well, but more importantly, it's compact compared to other fighting sticks with similar hardware. That borderline proprietary cable gives me the heebie-jeebies.

[-] MudMan@fedia.io 8 points 2 months ago

Are you sure? A bunch of arcade sticks use a USB A port to plug in an official controller and bypass some chekcs for console support. I assume you actually own this and it came with a male A to male A cable in the box? As in you're not accidentally plugging in a USB A cable going to your computer in the port meant to plug in either a console controller or a bypass dongle?

I am, to be clear, asking for a friend and was never super confused about why my brand new leverless controller wasn't working, myself.

[-] perviouslyiner@lemmy.world 5 points 2 months ago

I have a keyboard like this, yes it came with the cable (same A male plug each end) and yes it's used as a USB device.

[-] edinbruh@feddit.it 6 points 2 months ago

Meh, I have at least two hdd enclosures that use that cable.

Standards don't mean that much when the hardware manufacturer just doesn't care

[-] halcyoncmdr@lemmy.world 8 points 2 months ago

Entirely likely they figured a cable with Type A on both ends would be a cheap "proprietary" cable.

[-] dual_sport_dork@lemmy.world 6 points 2 months ago

I have a flashlight that does the same for its charging port. It's also capable of being used as a power bank by plugging another device's cable into that same port. I'm not entirely sure just how much protection circuitry is behind this and I haven't cared enough to subject it to anything heavy duty.

[-] SplashJackson@lemmy.ca 5 points 2 months ago

God I hate those

[-] TomMasz@lemmy.world 4 points 2 months ago

I have a Type A to Type A cable. It came with a simplified music player for dementia patients that I set up for my elderly aunt. No idea why they chose to do it that way.

[-] Nougat@fedia.io 5 points 2 months ago

So that you can be frustrated trying to plug in both ends.

[-] CmdrShepard42@lemm.ee -1 points 2 months ago

What's this music player called? I've been scouring the internet for years looking for a simple spotify enabled "boom box" that doesn't require you to use a phone to operate. Seems like such a simple product that seemingly doesn't exist.

[-] lemming741@lemmy.world 3 points 2 months ago

I had a cheapo KVM that came with that A-to-A arrangement

[-] GrumpyDuckling@sh.itjust.works 3 points 2 months ago

Those pcie x1 to x16 adapters also use one.

[-] samus12345@lemm.ee 1 points 2 months ago* (last edited 2 months ago)

The (apparently discontinued) 8bitdo N30 Arcade Stick. I have a Mayflash F300 Elite with the same form factor (including the forbidden port).

[-] Zorsith@lemmy.blahaj.zone -1 points 2 months ago* (last edited 2 months ago)

Id love it if more things did tbh. A controller really doesnt need the bandwidth of a proper usb type c cable, and type A would be much more securely attached (physically) to something that moves around IMO.

[-] Hawke@lemmy.world 5 points 2 months ago

In what way is type A more secure physically than type B?

[-] Zorsith@lemmy.blahaj.zone 3 points 2 months ago* (last edited 2 months ago)

I always forget type B even exists tbh. But type A has more friction in my experience

[-] swab148@lemm.ee 2 points 2 months ago

Type B is used for printers most frequently, in my experience, though I do have an old external HDD that uses it, as well as the audio interface for my desktop.

this post was submitted on 29 May 2025
134 points (94.7% liked)

Mildly Interesting

22222 readers
29 users here now

This is for strictly mildly interesting material. If it's too interesting, it doesn't belong. If it's not interesting, it doesn't belong.

This is obviously an objective criteria, so the mods are always right. Or maybe mildly right? Ahh.. what do we know?

Just post some stuff and don't spam.

founded 2 years ago
MODERATORS