374
submitted 15 hours ago by cm0002@lemmy.world to c/funny@sh.itjust.works
top 15 comments
sorted by: hot top controversial new old
[-] expatriado@lemmy.world 29 points 15 hours ago
[-] casmael@mander.xyz 5 points 14 hours ago

F0.95 / f6.7

[-] tanisnikana@lemmy.world 18 points 14 hours ago

I know this is supposed to be a meme, but dammit I think I’m a slightly better photographer for it now.

[-] bleistift2@sopuli.xyz 11 points 15 hours ago

Only you didn’t explain the number, and why it’s a fraction.

[-] VicksVaporBBQrub@sh.itjust.works 3 points 14 hours ago* (last edited 14 hours ago)

I think it's...
Smaller f-stop number = shallower depth-of-field = just the cat's head is in focus.

Larger f-stop number = more depth = cat's head, tail, & butt is in focus. A bit overall darker.

Largest f-stop available = maximum depth in the focused plane = head, body, tail, and backgrounds is in focus. Image is more overall darker. This can be compensated for by using a slower shutterspeed number to bring in more light sensitivity.

edit add- don't know why it is a fraction

[-] hydrospanner@lemmy.world 7 points 12 hours ago

You're mostly right with the depth of field being the big difference but the image being darker is not a function of aperture (f-stop) directly, but rather overall exposure. At the same ISO setting, two identical shots in the same lighting would be the same brightness with truly equal exposure: the reduction in aperture (increasing to m the f-stop number to a higher value) would be compensated for with an equivalent decrease in shutter speed (in simple terms, constricting the hole lets in less light, so we leave the hole open longer to let in the same amount as before).

In the example, if the scene is darker it's because the exposure changed, not just because of the aperture.

Additionally, the number is shown as a fraction because it is a fraction. The "f" in the value (f/2.8) is a variable that stands for "focal length", that being the focal length of the lens being used. So, for example, a 50mm lens set to f/2 would have its aperture set to a 25mm diameter. (50/2)

The reason the numbers are strange numbers and non-linear in scale is because they correspond to aperture diameters that let in either double or half the amount of light from the stop next to them. So adjusting from f/2 to f/2.8 cuts the amount of light in half (I think this is basically doubling or halving the area of the circle of the aperture).

This is why a one stop change at lower values (bigger openings) has a much smaller numeric shift than a one stop change at higher values: adding or subtracting diameter of a larger circle adds or subtracts much more area than the same diameter change to a smaller circle. That's why one stop goes only from f/2 to f/2.8 on the wide open end, but on the closed down end, one stop goes from f/11 to f/16.

[-] 9point6@lemmy.world 1 points 12 hours ago* (last edited 12 hours ago)

It's not a fraction, it's just the notation used for the aperture setting.

Edit: well, okay yes it is technically a fraction the decimal value is a function of focal length and aperture diameter

Edit: actually ignore me and read the other comment, it's a much more thorough explanation

[-] supersquirrel@sopuli.xyz 5 points 14 hours ago* (last edited 14 hours ago)

CatOs Daemon Mode

CatLine Interface initializing

set fstop = 2.38

set fstop = 1/32

set iso = cute

[-] _cryptagion@lemmy.dbzer0.com 2 points 14 hours ago

f/32? are you shooting on the sun?

[-] lenuup@reddthat.com 2 points 7 hours ago

Dude, I've got an old macro lens with a max f/45, need it for the depth of field. F32 on a sunny day outside or at specific lighting is nothing unusual.

[-] _cryptagion@lemmy.dbzer0.com 1 points 26 minutes ago

Yes, thank you, I’m so glad there are people on Lemmy to take every painfully obvious joke deadly serious.

[-] psx_crab@lemmy.zip 1 points 7 hours ago

Long exposure shot in sunny day?

someone care to explain to me why f1.4 is supposed to be the lowest f number jet i can buy a fresnel lens with a calculated f of 0.4?

[-] 9point6@lemmy.world 16 points 12 hours ago

Simple, f1.4 isn't supposed to be the lowest

[-] Fetus@lemmy.world 3 points 11 hours ago

Yeah, I have normal camera lenses lower than that. From memory, the F-stop number is like a ratio between the focal length and the effective diameter of the lens.

this post was submitted on 25 Jun 2025
374 points (99.0% liked)

Funny

10341 readers
1898 users here now

General rules:

Exceptions may be made at the discretion of the mods.

founded 2 years ago
MODERATORS