135
I want to believe (lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
[-] Hopfgeist@feddit.de 7 points 1 year ago

Gold-plating the connectors is actually one of the few things that does make sense. When new, they won't sound better, but they corrode less, which can, sometime in the future, make a difference, albeit very slight: surface oxidation can form a tiny capacitor. That said, I think you'd be hard-pressed to tell the difference to chrome-plated ones. But unlike lots of other esoteric "high-end" nonsense, this one has at least theoretical technical merit. And the micrometer-scale galvanic gold-plating isn't expensive, either.

[-] MargotRobbie@lemmy.world 4 points 1 year ago

Gold/Nickel plating is standard for most connectors nowadays except for the cheapest of contacts, which uses tin plating.

Gold plating can still wear off, because pure gold plating is "soft" and "hard" gold plating is usually done with some kind of mixture with other metals for hardness. And the cost of gold plating depends greatly on the thickness, since most of the cost won't be in materials but in process time.

That being said, if you truly want the absolute best uncorrodible and toughest plating for a connector, look for rhodium plating, but that is VERY expensive.

[-] kurosawaa@programming.dev 2 points 1 year ago

I think the meme makes more since for any digital connection, where it's literally impossible for the cable to make a difference to the sound quality. I have seen some wacky shit online, like claims of gold plated optical audio cables.

[-] Hopfgeist@feddit.de 1 points 1 year ago

digital connection, where it's literally impossible for the cable to make a difference to the sound quality

Digital isn't magic. Lower-quality cables can very much make a difference on digital connections, including digital audio, although the effects are very different from analogue signal degradation. Granted, for the low bitrates required for audio you'd have to have a really bad cable/connector. As long as you are above a certain quality threshold, it doesn't matter, but with surface corrosion you may end up with marginal signal levels or degraded signal edges causing more bit errors. What that means depends on the type of protocol and the kind of error detection and error correction. Best case is a very good error correction, and nothing happens. But it may lead to slower transfer speeds due to retransmits, dropouts in real-time connections, or worse.

Less than perfect conductivity or mismatched impedance may also limit the bandwidth, cause reflections, and other nasty signal degradation. It is no joke that some cheap HDMI cables cannot reliably transmit 4k signals, and the higher-quality ones generally have gold-plated contact surfaces for good reason.

[-] kurosawaa@programming.dev 1 points 1 year ago

The difference in HDMI cables is entirely dependent on which version of HDMi hey are compliant with, it has nothing to do with using gold or any other kind of material. A digital signal is either readable or unreadable with no in-between. The chance of a degraded cable only lowering then quality of the output rather than resulting in total failiure is near impossible.

this post was submitted on 03 Jul 2023
135 points (97.2% liked)

Lemmy Shitpost

26965 readers
2481 users here now

Welcome to Lemmy Shitpost. Here you can shitpost to your hearts content.

Anything and everything goes. Memes, Jokes, Vents and Banter. Though we still have to comply with lemmy.world instance rules. So behave!


Rules:

1. Be Respectful


Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.

Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.

...


2. No Illegal Content


Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.

That means:

-No promoting violence/threats against any individuals

-No CSA content or Revenge Porn

-No sharing private/personal information (Doxxing)

...


3. No Spam


Posting the same post, no matter the intent is against the rules.

-If you have posted content, please refrain from re-posting said content within this community.

-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.

-No posting Scams/Advertisements/Phishing Links/IP Grabbers

-No Bots, Bots will be banned from the community.

...


4. No Porn/ExplicitContent


-Do not post explicit content. Lemmy.World is not the instance for NSFW content.

-Do not post Gore or Shock Content.

...


5. No Enciting Harassment,Brigading, Doxxing or Witch Hunts


-Do not Brigade other Communities

-No calls to action against other communities/users within Lemmy or outside of Lemmy.

-No Witch Hunts against users/communities.

-No content that harasses members within or outside of the community.

...


6. NSFW should be behind NSFW tags.


-Content that is NSFW should be behind NSFW tags.

-Content that might be distressing should be kept behind NSFW tags.

...

If you see content that is a breach of the rules, please flag and report the comment and a moderator will take action where they can.


Also check out:

Partnered Communities:

1.Memes

2.Lemmy Review

3.Mildly Infuriating

4.Lemmy Be Wholesome

5.No Stupid Questions

6.You Should Know

7.Comedy Heaven

8.Credible Defense

9.Ten Forward

10.LinuxMemes (Linux themed memes)


Reach out to

All communities included on the sidebar are to be made in compliance with the instance rules. Striker

founded 1 year ago
MODERATORS